Effect of ultrasonic treatment on microstructural and mechanical properties of Al 7075/Grp composite

Bahrami, 2016, Development of metal-matrix composites from industrial/agricultural waste materials and their derivatives, Crit. Rev. Environ. Sci. Technol., 46, 10.1080/10643389.2015.1077067 Bahrami, 2015, Effect of rice-husk ash on properties of laminated and functionally graded Al/SiC composites by one-step pressureless infiltration, J. Alloys Compd., 644, 256, 10.1016/j.jallcom.2015.04.194 Soltani, 2014, Effect of hot extrusion on wear properties of Al – 15 wt .% Mg 2 Si in situ metal matrix composites, Mater. Des., 53, 774, 10.1016/j.matdes.2013.07.084 Bahrami, 2018, Bilayer graded Al/B 4 C/rice husk ash composite : wettability behavior , thermo-mechanical , and electrical properties, J. Compos. Mater. J., 1 Kamm, 2017, Tailoring microstructure and properties of bilayer-graded Al/B 4 C/MgAl 2 O 4 composites by single-stage pressureless in fi ltration, J. Alloys Compd., 694, 408, 10.1016/j.jallcom.2016.09.284 Soltani, 2013, The effect of Ti on mechanical properties of extruded in-situ Al-15 pct Mg 2 Si composite, Metall. Mater. Trans., 44A, 4366, 10.1007/s11661-013-1747-2 Yang, 2004, Study on bulk aluminum matrix nano-composite fabricated by ultrasonic dispersion of nano-sized SiC particles in molten aluminum alloy, Mater. Sci. Eng., 380, 378, 10.1016/j.msea.2004.03.073 Suresh, 2014, Effect of graphite addition on mechanical behavior of Al6061/TiB2hybrid composite using acoustic emission, Mater. Sci. Eng., 612, 16, 10.1016/j.msea.2014.06.024 Ibrahim, 1991, Particulate reinforced metal matrix composites - a review, J. Mater. Sci. Technol., 26, 1137 Pramod, 2015, Aluminum-based cast in situ composites : a review, J. Mater. Eng. Perform., 24, 2185, 10.1007/s11665-015-1424-2 Deaquino-lara, 2015, Tribological characterization of Al7075 – graphite composites fabricated by mechanical alloying and hot extrusion, J. Mater. Des., 67, 224, 10.1016/j.matdes.2014.11.045 Baradeswaran, 2014, Composites : Part B Wear and mechanical characteristics of Al 7075/graphite composites, Compos. Part B., 56, 472, 10.1016/j.compositesb.2013.08.073 Tapp, 2017, Electrical and thermomechanical properties of CVI- Si 3 N 4 porous rice husk ash in fi ltrated by Al-Mg-Si alloys, J. Alloys Compd., 696, 856, 10.1016/j.jallcom.2016.12.051 Soltani, 2013, Effect of 10Ce-TZP/Al 2 O 3 nanocomposite particle amount and sintering temperature on the microstructure and mechanical properties of Al/(10Ce- TZP/Al 2 O 3) nanocomposites, Mater. Des., 50, 85, 10.1016/j.matdes.2013.03.001 Bahrami, 2015, Effect of sintering temperature on tribological behavior of Ce-TZP/Al2O3-aluminum nanocomposite, J. Compos. Mater. J., 49, 3507, 10.1177/0021998314567010 Taylor, 2014, Manufacturing wear-resistant 10Ce-TZP/Al 2 O 3 nanoparticle aluminum composite by powder metallurgy processing, mater, Manuf. Process, 37 Nandipati, 2013, Fabrication and study of the mechanical properties of AA2024 alloy reinforced with B 4 C nano-particles using ultrasonic cavitation method, J. Mech. Civ. Eng., 7, 1 Taha, 2001, INDUSTRIALIZATION OF CAST ALUMINUM MATRIX COMPOSITES (AMCCs), Mater. Manuf. Process., 16, 619, 10.1081/AMP-100108625 Yan, 2011, Ultrasonic assisted fabrication of particle reinforced bonds joining aluminum metal matrix composites, Mater. Des., 32, 343, 10.1016/j.matdes.2010.06.036 Zhou, 2014, Manufacture of nano-sized particle-reinforced metal matrix composites: a review, Acta Metall. Sin. (English Lett., 27, 798, 10.1007/s40195-014-0154-z Nampoothiri, 2016, Post in-situ reaction ultrasonic treatment for generation of Al-4.4Cu/TiB2nanocomposite: a route to enhance the strength of metal matrix nanocomposites, J. Alloys Compd., 683, 370, 10.1016/j.jallcom.2016.05.067 Eskin, 1995, Effect of ultrasonic processing of molten metal on structure formation and improvement of properties of high-strength AI-Zn-Mg-Cu-Zr alloys, Adv. Perform. Mater., 2, 43, 10.1007/BF00711650 Vashishtha, 2017, Abrasive wear maps for high velocity oxy fuel (HVOF) sprayed WC-12Co and Cr3C2−25NiCr coatings, Tribol. Int., 114, 290, 10.1016/j.triboint.2017.04.037 Liu, 2011, Composites : Part B Ultrasound assisted in situ technique for the synthesis of particulate reinforced aluminum matrix composites, Compos. Part B., 42, 2080, 10.1016/j.compositesb.2011.04.004 Liu, 2012, Journal of Materials Processing Technology Effect of ultrasonic vibration on microstructural evolution of the reinforcements and degassing of in situ TiB 2p/Al – 12Si – 4Cu composites, J. Mater. Process. Technol., 212, 365, 10.1016/j.jmatprotec.2011.09.021 Chen, 2019, The effects of ultrasonic treatments on the microstructure and mechanical properties of SAC0307 solder, J. Mater. Process. Technol., 266, 619, 10.1016/j.jmatprotec.2018.11.025 Rao, 2021, Materials Science & Engineering A Microstructural , mechanical , and wear properties characterization and strengthening mechanisms of Al7075/SiCnp composites processed through ultrasonic cavitation assisted stir-casting, Mater. Sci. Eng., 805, 140553, 10.1016/j.msea.2020.140553 Prakash, 2021, Mechanical characterization studies of aluminium alloy 7075 based nanocomposites, Silicon Shivdev Singh, 2019, Production and high temperature wear characterization of AA 7075/Al2O3/Graphite hybrid nanocomposites by enhanced stir and ultrasound-assisted casting method, Mater. Res. Express Accept., 6 Gupta, 2021, Influence of ultrasonic agitation on the abrasive wear characteristics of Al-Cu/2 vol % Gr p composite in fl uence of ultrasonic agitation on the abrasive wear characteristics of Al-Cu/2 vol % Gr p composite, Surf. Topogr. Metrol. Prop. Pap., 10, 1 Gupta, 2020, Ultrasonic assisted synthesis of Al e Cu/2 vol % Gr p composite and its characterization, J. Alloys Compd., 845, 156087, 10.1016/j.jallcom.2020.156087 Christy Roshini, 2015, Ultrasonic-assisted synthesis of graphite-reinforced Al matrix nanocomposites, J. Mater. Eng. Perform., 24, 2234, 10.1007/s11665-015-1491-4 Krishnan, 1981, The UPAL process: a direct method of preparing cast aluminium alloy-graphite particle composites, J. Mater. Sci., 16, 1209, 10.1007/BF01033834 Ramani, 1991, Factors affecting the stability of non-wetting dispersoid suspensions in metallic melts, Composites, 22, 143, 10.1016/0010-4361(91)90673-5 Cao Pillai, 1995, Fracture behaviour of pressure die-cast aluminium-graphite composites, J. Mater. Sci., 30, 1455, 10.1007/BF00375248 Leng, 2008, Mechanical properties of SiC/Gr/Al composites fabricated by squeeze casting technology, Scripta Mater., 59, 619, 10.1016/j.scriptamat.2008.05.018 Udhayabanu, 2013, Ultrafine-grained, high-strength NiAl with Al2O3and Al4C3nanosized particles dispersed via mechanical alloying in toluene with spark plasma sintering, Mater. Sci. Eng., 585, 379, 10.1016/j.msea.2013.07.024 Leng, 2020, E ff ects of graphene nanoplates on the mechanical behavior and strengthening mechanism of 7075Al alloy, Materials, 13, 1, 10.3390/ma13245808 Scudino, 2009, Mechanical properties of Al-based metal matrix composites reinforced with Zr-based glassy particles produced by powder metallurgy, Acta Mater., 57, 2029, 10.1016/j.actamat.2009.01.010 Arsenault, 1986, Dislocation generation due to differences between the coefficients of thermal expansion, Mater. Sci. Eng., 81, 175, 10.1016/0025-5416(86)90261-2 Wang, 2014, Mechanical properties of in-situ TiB2/A356 composites, Mater. Sci. Eng., 590, 246, 10.1016/j.msea.2013.10.021 Chen, 2017, Length effect of carbon nanotubes on the strengthening mechanisms in metal matrix composites, Acta Mater., 140, 317, 10.1016/j.actamat.2017.08.048 Eskin, 2003, Production of natural and synthesized aluminum-based composite materials with the aid of ultrasonic (cavitation) treatment of the melt, Ultrason. Sonochem., 10, 297, 10.1016/S1350-4177(02)00158-X Shaeri, 2016, Progress in natural science : materials international effect of ECAP temperature on microstructure and mechanical properties of Al – Zn – Mg – Cu alloy, Prog. Nat. Sci. Mater. Int., 26, 182, 10.1016/j.pnsc.2016.03.003