Effect of temperature on interface diffusion in micro solder joint under current stressing

CHAN, 2010, Failure mechanisms of solder interconnects under current stressing in advanced electronic packages [J], Progress in Materials Science, 55, 428, 10.1016/j.pmatsci.2010.01.001 SA, 2013, Microstructure evolution of Cu-cored Sn solder joints under high temperature and high current density [J], Journal of Electronic Materials, 42, 2641, 10.1007/s11664-013-2603-2 JEONG, 2012, Effects of annealing and current stressing on the intermetallic compounds growth kinetics of Cu/thin Sn/Cu bump [J], Microelectronic Engineering, 89, 50, 10.1016/j.mee.2011.04.025 CHAO, 2009, Recent advances on kinetic analysis of electromigration enhanced intermetallic growth and damage formation in Pb-free solder joints [J], Microelectronics Reliability, 49, 253, 10.1016/j.microrel.2009.01.006 OTHMAN, 2012, Effects of current density on the formation and microstructure of Sn–9Zn, Sn–8Zn–3Bi and Sn–3Ag–0.5Cu solder joints [J], Intermetallics, 22, 1, 10.1016/j.intermet.2011.10.011 YAO, 2011, Polarity effect of electromigration and its influence on tensile properties of Sn–3.0Ag–0.5Cu lead-free solder joint [J], Transactions of Nonferrous Metals Society of China, 21, 3094 CHEN, 2010, Effect of electromigration on intermetallic compound formation in line-type Cu/Sn/Cu interconnect [J], Journal of Alloys and Compounds, 504, 535, 10.1016/j.jallcom.2010.05.158 LU, 2009, Polarity effect of electromigration on intermetallic compound formation in SnPb solder joints [J], Acta Materialia, 57, 2560, 10.1016/j.actamat.2009.02.015 GU, 2008, Effects of electromigration on the growth of intermetallic compounds in Cu/SnBi/Cu solder joints [J], Journal of Materials Research, 23, 2591, 10.1557/JMR.2008.0331 CHAO, 2007, Investigation of diffusion and electromigration parameters for Cu–Sn intermetallic compounds in Pb-free solders using simulated annealing [J], Acta Materialia, 55, 2805, 10.1016/j.actamat.2006.12.019 GAN, 2005, Polarity effect of electromigration on kinetics of intermetallic compound formation in Pb-free solder V-groove samples [J], Journal of Applied Physics, 97, 063514, 10.1063/1.1861151 WANG, 2013, Effective suppression of electromigration-induced Cu dissolution by using Ag as a barrier layer in lead-free solder joints [J], Journal of Alloys and Compounds, 564, 35, 10.1016/j.jallcom.2013.02.053 CHANG, 2010, The effects of solder volume and Cu concentration on the consumption rate of Cu pad during reflow soldering [J], Journal of Alloys and Compounds, 492, 99, 10.1016/j.jallcom.2009.11.088 ONISHI, 1975, Reaction-diffusion in the Cu–Sn system [J], Transactions of the Japan Institute of Metals, 9, 539, 10.2320/matertrans1960.16.539 LIM, 2009, Temperature effect on intermetallic compound growth kinetics of Cu pillar/Sn bumps [J], Journal of Electronic Materials, 38, 2228, 10.1007/s11664-009-0922-0 LIN, 2009, Evaluation of Cu-bumps with lead-free solders for flip-chip package applications [J], Microelectronic Engineering, 86, 2392, 10.1016/j.mee.2009.04.027 KIM, 2010, Intermetallic compound growth and reliability of Cu pillar bumps under current stressing [J], Journal of Electronic Materials, 39, 2281, 10.1007/s11664-010-1324-z CHEN, 2012, Electrorecrystallization of intermetallic compound in the Sn0.7Cu solder joint [J], Intermetallics, 26, 40, 10.1016/j.intermet.2012.02.022