Effect of tandem submerged arc welding process and parameters of Gleeble simulator thermal cycles on properties of the intercritically reheated heat affected zone

Ju, 2007, Fracture toughness anisotropy in a API steel line-pipe, Mater Lett, 61, 5178, 10.1016/j.matlet.2007.04.007 Xiao, 2006, Challenge of mechanical properties of an acicular ferrite pipeline steel, Mater Sci Eng A, 431, 41, 10.1016/j.msea.2006.05.029 Shin, 2007, Correlation of microstructure and charpy impact properties in API X70 and X80 line-pipe steels, Mater Sci Eng A, 485, 281, 10.1016/j.msea.2006.12.097 Pan, 2006, Kinetics and mechanisms of intragranular ferrite nucleation on non-metallic inclusions in low carbon steels, Mater Sci Eng A, 438–440, 1128, 10.1016/j.msea.2006.02.078 Moeinifar, 2010, Influence of peak temperature during simulation and real thermal cycles on microstructure and fracture toughness properties of the reheated zones, Mater Des, 31, 2948, 10.1016/j.matdes.2009.12.023 Curiel-Reyna, 2008, Effect of carbide precipitation on the structure and hardness in the heat-affected zone of hadfield steel after post-cooling treatments, Mater Manuf Process, 22, 14 Gliha, 2004, Fracture resistance of simulated heat affected zone areas in HSLA structural steel, Sci Technol Weld Join, 9, 399, 10.1179/136217104225021698 Lambert-Perlade, 2004, Mechanisms and modeling of cleavage fracture in simulated heat-affected zone microstructures of a high-strength low alloy steel, Metall Mater Trans A, 35, 1039, 10.1007/s11661-004-1007-6 Yajiang, 2003, Fine structure in the inter-critical heat-affected zone of HQ130 super-high strength steel, Bull Mater Sci, 26, 273, 10.1007/BF02707803 Bonnevie, 2004, Morphological aspects of martensite–austenite constituents in intercritical and coarse grain heat affected zones of structural steels, Mater Sci Eng A, 385, 352, 10.1016/j.msea.2004.06.033 Li, 2001, The effect of vanadium and niobium on the properties and microstructure of the intercritically reheated coarse grained heat affected zone in low carbon microalloyed steels, ISIJ Int, 41, 46, 10.2355/isijinternational.41.46 Grong Ø. Metallurgical modelling of welding. 2nd ed. Institute of Materials. London, England; 1997. Standard test methods for notched bar impact testing of metallic materials. ASTM E23. Am Soc Test Mater; 2006. Standard test method for microindentation hardness of materials. ASTM E384. Am Soc Test Mater; 2007. You, 2006, Materialometrical approach of predicting the austenite formation temperatures, Mater Sci Eng A, 419, 276, 10.1016/j.msea.2005.12.031 Andrews, 1965, Empirical formulae for the calculation of some transformation temperatures, JISI, 203, 721 Davis, 1994, Cleavage initiation in the intercritically reheated coarse grained heat affected zone: part I. Fractographic evidence, Metall Mater Trans A, 25, 563, 10.1007/BF02651598 Davis, 1996, Cleavage initiation in the intercritically reheated coarse grained heat affected zone: part II. Failure criteria and statistical effects, Metall Mater Trans A, 27, 3019, 10.1007/BF02663851 Suzuki, 2009, Influence of martensitic islands on fracture behaviour of high heat input weld HAZ, Weld Int, 23, 397, 10.1080/09507110802542817