Effect of slurry rheology on gas dispersion in a pilot-scale mechanical flotation cell

Alejo, 2009, Model for yield stress of quartz pulps and copper tailings, International Journal of Mineral Processing, 93, 213, 10.1016/j.minpro.2009.08.002 Arratia, 2006, Mixing of shear-thinning fluids with yield stress in stirred tanks, AIChE Journal, 52, 2310, 10.1002/aic.10847 Bakker, 2009, Numerical modelling of non-Newtonian slurry in a mechanical flotation cell, Minerals Engineering, 22, 944, 10.1016/j.mineng.2009.03.016 Bakker, 2010, The development of a cavern model for mechanical flotation cells, Minerals Engineering, 23, 968, 10.1016/j.mineng.2010.03.016 Blakey, 2003, Characterizing the rheology of laterite slurries, International Journal of Mineral Processing, 70, 23, 10.1016/S0301-7516(02)00147-3 Burgess, 1997, OK100 tank cell operation at Pasminco–Broken Hill, Minerals Engineering, 10, 723, 10.1016/S0892-6875(97)00051-4 Chen, 2001, Bubble size measurement in flotation machines, Minerals Engineering, 14, 427, 10.1016/S0892-6875(01)00023-1 Cooke, 2008, The effect of solids on the dense phase gas fraction and gas–liquid mass transfer at conditions close to the heterogeneous regime in a mechanically agitated vessel, Chemical Engineering Research and Design, 86, 869, 10.1016/j.cherd.2007.10.022 Das, 2011, Rheological behaviour of lateritic smectite ore slurries, Minerals Engineering, 24, 594, 10.1016/j.mineng.2010.08.011 Deglon, 2000, Review of hydrodynamics and gas dispersion in flotation cells on South African platinum concentrators, Minerals Engineering, 13, 235, 10.1016/S0892-6875(00)00003-0 Deglon, 2005, The effect of agitation on the flotation of platinum ores, Minerals Engineering, 18, 839, 10.1016/j.mineng.2005.01.024 Duarte, 2007, Mechanism for the recovery of silicate gangue minerals in the flotation of ultrafine sphalerite, Minerals Engineering, 20, 766, 10.1016/j.mineng.2007.02.012 Fangary, 2000, Fluid trajectories in a stirred vessel of non-Newtonian liquid using positron emission particle tracking, Chemical Engineering Science, 55, 5969, 10.1016/S0009-2509(00)00176-7 Finch, 2000, Gas dispersion properties: bubble surface area flux and gas hold-up, Minerals Engineering, 13, 365, 10.1016/S0892-6875(00)00019-4 Gorain, 1995, Studies on impeller type, impeller speed and air flow rate in an industrial scale flotation cell. Part 1: Effect on bubble size distribution, Minerals Engineering, 8, 615, 10.1016/0892-6875(95)00025-L Gorain, 1995, Studies on impeller type, impeller speed and air flow rate in an industrial scale flotation cell. Part 2: Effect on gas hold-up, Minerals Engineering, 8, 1557, 10.1016/0892-6875(95)00118-2 Grau, 2003, Gas dispersion measurements in a flotation cell, Minerals Engineering, 16, 1081, 10.1016/j.mineng.2003.06.007 Grau, 2005, Bubble size distribution in laboratory scale flotation cells, Minerals Engineering, 18, 1164, 10.1016/j.mineng.2005.06.011 Gomez, 2003, Industrial testing of a gas hold-up sensor for flotation systems, Minerals Engineering, 16, 493, 10.1016/S0892-6875(03)00083-9 He, 2006, Parameter studies on the rheology of limestone slurries, International Journal of Mineral Processing, 78, 63, 10.1016/j.minpro.2005.07.006 Machon, 1980, Some effects of pseudoplasticity on hold-up in aerated, agitated vessels, Chemical Engineering Journal, 19, 67, 10.1016/0300-9467(80)85078-7 Moore, 1995, Velocity distributions in a stirred tank containing a yield stress fluid, Chemical Engineering Science, 50, 2467, 10.1016/0009-2509(95)00086-K Muster, 1995, Rheological investigations of sulphide mineral slurries, Minerals Engineering, 8, 1541, 10.1016/0892-6875(95)00117-4 Naik, 2007, Anglo research (AR) experience with integrated comminution and flotation plant modelling, Journal South African Institute of Mining and Metallurgy, 107, 641 Ndlovu, B.N., Burdukova, E., Becker, M., Deglon, D.A., Franzidis, J.P., Laskowski, J.S., 2010. An investigation on the effects of chrysotile particle shape and anisotropic properties on the rheology of chrysotile suspensions. In: Proceedings of XXV International Mineral Processing Congress. Brisbane, 6–10 September. Nesset, 2006, Some gas dispersion characteristics of mechanical flotation machines, Minerals Engineering, 19, 807, 10.1016/j.mineng.2005.09.045 Pease, 2006, Designing flotation circuits for high fines recovery, Minerals Engineering, 19, 831, 10.1016/j.mineng.2005.09.056 Power, A., Franzidis, J.P., 2000, The characterization of hydrodynamic conditions in industrial flotation cells. In: Proceedings AusIMM 7th Mill Operators Conference. Kalgoorlie, WA, pp. 243–255. Pradip, 1998, Shear yield stress of flocculated alumina–zirconia mixed suspensions: effect of solid loading, composition and particle size distribution, Chemical Engineering Science, 53, 3073, 10.1016/S0009-2509(98)00158-4 Prestidge, 1997, Rheological investigations of ultrafine galena particle slurries under flotation-related conditions, International Journal of Mineral Processing, 51, 241, 10.1016/S0301-7516(97)00027-6 Sanchez Perez, 2006, Shear rate in stirred tank and bubble column bioreactors, Chemical Engineering Journal, 124, 1, 10.1016/j.cej.2006.07.002 Schwarz, 2006, Gas dispersion measurements in industrial flotation cells, Minerals Engineering, 19, 556, 10.1016/j.mineng.2005.09.022 Schubert, 1999, On the turbulence controlled microprocesses in flotation machines, International Journal of Mineral Processing, 56, 257, 10.1016/S0301-7516(98)00048-9 Shi, 1996, A model for slurry rheology, International Journal of Mineral Processing, 47, 103, 10.1016/0301-7516(95)00101-8 Tucker, 1994, An evaluation of a direct method of bubble size distribution measurement in a laboratory batch flotation cell, Minerals Engineering, 7, 667, 10.1016/0892-6875(94)90098-1 Van der Westhuizen, 2007, Evaluation of solids suspension in a pilot-scale mechanical flotation cell, Minerals Engineering, 20, 233, 10.1016/j.mineng.2006.08.019 Van der Westhuizen, 2008, Solids suspension in a pilot-scale mechanical flotation cell: a critical impeller speed correlation, Minerals Engineering, 21, 621, 10.1016/j.mineng.2007.12.010 Vlaev, 2002, Some effects of rheology on the spatial distribution of gas hold-up in a mechanically agitated vessel, Chemical Engineering Journal, 87, 21, 10.1016/S1385-8947(01)00208-X Wiese, 2010, The effect of increased frother dosage on froth stability at high depressant dosages, Minerals Engineering, 23, 1010, 10.1016/j.mineng.2010.04.011 Wilkens, 2005, New techniques for measuring and modelling cavern dimensions in a Bingham plastic fluid, Chemical Engineering Science, 60, 5269, 10.1016/j.ces.2005.04.058 Yianatos, 2001, Hydrodynamic and metallurgical characterization of industrial flotation banks for control purposes, Minerals Engineering, 14, 1033, 10.1016/S0892-6875(01)00109-1 Yue, 2004, Influence of rheology on the performance of horizontal stirred mills, International Journal of Mineral Processing, 17, 1169