Effect of sagittal pelvic tilt on joint stress distribution in hip dysplasia: A finite element analysis

Clinical Biomechanics - Tập 74 - Trang 34-41 - 2020
Kenji Kitamura1, Masanori Fujii1, Takeshi Utsunomiya1, Miho Iwamoto1, Satoshi Ikemura1, Satoshi Hamai1, Goro Motomura1, Mitsugu Todo2, Yasuharu Nakashima1
1Department of Orthopaedic Surgery, Graduate School of Medical Sciences, Kyushu University, 3-1-1, Maidashi, Higashi-ku, Fukuoka 812-8582, Japan
2Research Institute for Applied Mechanics, Kyushu University, 6-1 Kasuga-Koen, Kasuga 816-8580, Japan

Tài liệu tham khảo

Anderson, 2008, Validation of finite element predictions of cartilage contact pressure in the human hip joint, J. Biomech. Eng., 130, 10.1115/1.2953472 Bergmann, 2001, Hip contact forces and gait patterns from routine activities, J. Biomech., 34, 859, 10.1016/S0021-9290(01)00040-9 Bessho, 2007, Prediction of strength and strain of the proximal femur by a CT-based finite element method, J. Biomech., 40, 1745, 10.1016/j.jbiomech.2006.08.003 Bessho, 2009, Prediction of proximal femur strength using a CT-based nonlinear finite element method: differences in predicted fracture load and site with changing load and boundary conditions, Bone., 45, 226, 10.1016/j.bone.2009.04.241 Caligaris, 2008, Effects of sustained interstitial fluid pressurization under migrating contact area, and boundary lubrication by synovial fluid, on cartilage friction, Osteoarthr. Cartil., 16, 1220, 10.1016/j.joca.2008.02.020 Chegini, 2009, The effects of impingement and dysplasia on stress distributions in the hip joint during sitting and walking: a finite element analysis, J. Orthop. Res., 27, 195, 10.1002/jor.20747 Dalstra, 1995, Development and validation of a three-dimensional finite element model of the pelvic bone, J. Biomech. Eng., 117, 272, 10.1115/1.2794181 Fujii, 2011, Effect of intra-articular lesions on the outcome of periacetabular osteotomy in patients with symptomatic hip dysplasia, J. Bone Joint Surg. Br., 93, 1449, 10.1302/0301-620X.93B11.27314 Fujii, 2016, Factors associated with severity of intra-articular lesions in patients with severe hip dysplasia, Arthroscopy., 32, 1581, 10.1016/j.arthro.2016.01.060 Ganz, 1988, A new periacetabular osteotomy for the treatment of hip dysplasias, Technique and preliminary results. Clin. Orthop. Relat. Res., 232, 26 Hadley, 1990, The effects of contact pressure elevations and aseptic necrosis on the long-term outcome of congenital hip dislocation, J. Orthop. Res., 8, 504, 10.1002/jor.1100080406 Harris, 1986, Etiology of osteoarthritis of the hip, Clin. Orthop. Relat. Res., 213, 20, 10.1097/00003086-198612000-00004 Henak, 2011, Role of the acetabular labrum in load support across the hip joint, J. Biomech., 44, 2201, 10.1016/j.jbiomech.2011.06.011 Henak, 2014, Patient-specific analysis of cartilage and labrum mechanics in human hips with acetabular dysplasia, Osteoarthr. Cartil., 22, 210, 10.1016/j.joca.2013.11.003 Ilizaliturri, 2008, A geographic zone method to describe intra-articular pathology in hip arthroscopy: cadaveric study and preliminary report, Arthroscopy., 24, 534, 10.1016/j.arthro.2007.11.019 Keyak, 1998, Prediction of femoral fracture load using automated finite element modeling, J. Biomech., 31, 125, 10.1016/S0021-9290(97)00123-1 Konrath, 1998, The role of the acetabular labrum and the transverse acetabular ligament in load transmission in the hip, J. Bone Joint Surg. Am., 80, 1781, 10.2106/00004623-199812000-00008 Liechti, 2015, Protrusio acetabuli: joint loading with severe pincer impingement and its theoretical implications for surgical therapy, J. Orthop. Res., 33, 106, 10.1002/jor.22724 Liu, 2016, Evaluation of constant thickness cartilage models vs. patient specific cartilage models for an optimized computer-assisted planning of periacetabular osteotomy, PLoS ONE, 11 Matsuura, 2014, Accuracy of specimen-specific nonlinear finite element analysis for evaluation of distal radius strength in cadaver material, J. Orthop. Sci., 19, 1012, 10.1007/s00776-014-0616-1 Mayr, 2005, The frontal pelvic plane provides a valid reference system for implantation of the acetabular cup: spatial orientation of the pelvis in different positions, Acta Orthop., 76, 848, 10.1080/17453670510045471 Michaeli, 1997, Comparison of predicted and measured contact pressures in normal and dysplastic hips, Med. Eng. Phys., 19, 180, 10.1016/S1350-4533(96)00051-3 Miyamura, 2018, Altered bone density and stress distribution patterns in long-standing cubitus varus deformity and their effect during early osteoarthritis of the elbow, Osteoarthr. Cartil., 26, 72, 10.1016/j.joca.2017.10.004 Miyasaka, 2017, Sex- and age-specific differences in femoral head coverage and acetabular morphology among healthy subjects-derivation of normal ranges and thresholds for abnormality, Skelet. Radiol., 46, 523, 10.1007/s00256-017-2583-z Murphy, 1990, Acetabular dysplasia in the adolescent and young adult, Clin. Orthop. Relat. Res., 261, 214, 10.1097/00003086-199012000-00023 Murphy, 1995, The prognosis in untreated dysplasia of the hip. A study of radiographic factors that predict the outcome, J. Bone Joint Surg. Am., 77, 985, 10.2106/00004623-199507000-00002 Nishihara, 2003, Measurements of pelvic flexion angle using three-dimensional computed tomography, Clin. Orthop. Relat. Res., 411, 140, 10.1097/01.blo.0000069891.31220.fd Nishii, 2004, Three-dimensional distribution of acetabular cartilage thickness in patients with hip dysplasia: a fully automated computational analysis of MR imaging, Osteoarthr. Cartil., 12, 650, 10.1016/j.joca.2004.04.009 Pullen, 2014, Variability of acetabular coverage between supine and weightbearing pelvic radiographs, Am. J. Sports Med., 42, 2643, 10.1177/0363546514548854 Russell, 2006, Cartilage contact pressure elevations in dysplastic hips: a chronic overload model, J. Orthop. Surg. Res., 1, 6, 10.1186/1749-799X-1-6 Schreiber, 2011, Hounsfield units for assessing bone mineral density and strength: a tool for osteoporosis management, J. Bone Joint Surg. Am., 93, 1057, 10.2106/JBJS.J.00160 Tachibana, 2019, Does acetabular coverage vary between the supine and standing positions in patients with hip dysplasia?, Clin. Orthop. Relat. Res., 477, 2455, 10.1097/CORR.0000000000000898 Tani, 2019, Posterior pelvic tilt from supine to standing in patients with symptomatic developmental dysplasia of the hip, J. Orthop. Res. Tönnis, 1987 Troelsen, 2008, Weightbearing anteroposterior pelvic radiographs are recommended in DDH assessment, Clin. Orthop. Relat. Res., 466, 813, 10.1007/s11999-008-0156-0 Uemura, 2018, Three-dimensional femoral head coverage in the standing position represents that measured in vivo during gait, Clin. Anat., 31, 1177, 10.1002/ca.23262 Utsunomiya, 2018, Effects of sclerotic changes on stress concentration in early-stage osteonecrosis: a patient-specific, 3D finite element analysis, J. Orthop. Res., 36, 3169, 10.1002/jor.24124 Vafaeian, 2017, Finite element analysis of mechanical behavior of human dysplastic hip joints: a systematic review, Osteoarthr. Cartil., 25, 438, 10.1016/j.joca.2016.10.023 Wiberg, 1939, Studies on dysplastic acetabula and congenital subluxation of the hip joint: with special reference to the complication of osteo-arthritis, Acta Chir. Scand., 83, 1 Wu, 2002, ISB recommendation on definitions of joint coordinate system of various joints for the reporting of human joint motion--part I: ankle, hip, and spine, International Society of Biomechanics. J. Biomech., 35, 543 Zhao, 2010, Effect of periacetabular osteotomy for acetabular dysplasia clarified by three-dimensional finite element analysis, J. Orthop. Sci., 15, 632, 10.1007/s00776-010-1511-z Zou, 2013, Optimization of the position of the acetabulum in a ganz periacetabular osteotomy by finite element analysis, J. Orthop. Res., 31, 472, 10.1002/jor.22245