Effect of prewetting methods on some fresh and hardened properties of concrete with pumice aggregate

Kabay N. The effect of pore structure on mechanical and physical properties of lightweight aggregate concrete. PhD Thesis. Istanbul, Yıldız Technical University; 2009. ACI 318-08. Building code requirements for structural concrete. American Concrete Institute; 2008. Newman, 2003, Properties of structural lightweight aggregate concrete, 19 EN 206-1. Concrete – part 1: specification, performance, production and conformity; 2000. ACI 213R. Guide for structural lightweight-aggregate concrete. American Concrete Institute; 2003. Bremner TW, Holm TA, Stepanova VF. Lightweight concrete – a proven material for two millennia. In: Sarkar SL, Grutzeck MW, editors. Proceedings of advances in cement and concrete. Durham; 1994. p. 37–51. Chandra, 2003 Sari, 2005, The effects of gradation and admixture on the pumice lightweight aggregate concrete, Cem Concr Res, 35, 936, 10.1016/j.cemconres.2004.04.020 Gündüz, 2008, The effects of pumice aggregate/cement ratios on the low-strength concrete properties, Constr Build Mater, 22, 721, 10.1016/j.conbuildmat.2007.01.030 Chia, 2002, Water permeability and chloride penetrability of high-strength lightweight aggregate concrete, Cem Concr Res, 32, 639, 10.1016/S0008-8846(01)00738-4 Alduaij, 1999, Lightweight concrete in hot coastal areas, Cem Concr Compos, 21, 453, 10.1016/S0958-9465(99)00035-9 Babu, 2003, Behaviour of lightweight expanded polystyrene concrete containing silica fume, Cem Concr Res, 33, 755, 10.1016/S0008-8846(02)01055-4 Kılıç, 2003, High-strength lightweight concrete made with scoria aggregate containing mineral admixtures, Cem Concr Res, 33, 1595, 10.1016/S0008-8846(03)00131-5 Shannag, 2011, Characteristics of lightweight concrete containing mineral admixtures, Constr Build Mater, 25, 658, 10.1016/j.conbuildmat.2010.07.025 Lo, 1999, Microstructure of pre-wetted aggregate on lightweight concrete, Build Environ, 34, 759, 10.1016/S0360-1323(98)00060-2 Chen, 2005, Contribution of hybrid fibers on the properties of the high-strength lightweight concrete having good workability, Cem Concr Res, 35, 913, 10.1016/j.cemconres.2004.07.035 Akcay, 2009, Optimisation of using lightweight aggregates in mitigating autogenous deformation of concrete, Constr Build Mater, 23, 353, 10.1016/j.conbuildmat.2007.11.015 Lo, 2004, Influence of aggregate pre-wetting and fly ash on mechanical properties of lightweight concrete, Waste Manage, 24, 333, 10.1016/j.wasman.2003.06.003 Elsharief, 2005, Influence of lightweight aggregate on the microstructure and durability of mortar, Cem Concr Res, 35, 1368, 10.1016/j.cemconres.2004.07.011 Lo, 2006, The effects of air content on permeability of lightweight concrete, Cem Concr Res, 36, 1874, 10.1016/j.cemconres.2006.06.009 EN 1097-6. Tests for mechanical and physical properties of aggregates – part 6: determination of particle density and water absorption; 2000. EN 932-3. Tests for general properties of aggregates – part 3: procedure and terminology for simplified petrographic description; 1997. Hossain, 2004, Properties of volcanic pumice based cement and lightweight concrete, Cem Concr Res, 34, 283, 10.1016/j.cemconres.2003.08.004 Şahin, 2003, The effects of different cement dosages, slumps and pumice aggregate ratios on the compressive strength and densities of concrete, Cem Concr Res, 33, 1245, 10.1016/S0008-8846(03)00048-6 Narayanan, 2000, Structure and properties of aerated concrete: a review, Cem Concr Compos, 22, 321, 10.1016/S0958-9465(00)00016-0 Neville, 2000 Cusson, 2008, Internal curing of high-performance concrete with pre-soaked fine lightweight aggregate for prevention of autogenous shrinkage cracking, Cem Concr Res, 38, 757, 10.1016/j.cemconres.2008.02.001 Kovler, 2004, Pre-soaked lightweight aggregates as additives for internal curing of high-strength concretes, Cem Concr Aggreg, 26, 1, 10.1520/CCA12295 Henkensiefken, 2009, Volume change and cracking in internally cured mixtures made with saturated lightweight aggregate under sealed and unsealed conditions, Cem Concr Compos, 31, 427, 10.1016/j.cemconcomp.2009.04.003