Effect of precipitated carbides on the fretting wear behavior of Inconel 600 alloy

Garcıa, 2001, Corrosion-wear of passivating materials in sliding contacts based on a concept of active wear track area, Wear, 249, 452, 10.1016/S0043-1648(01)00577-4 Prakash, 2011, 697 Helmi, 2006, Fretting fatigue and wear damage of structural components in nuclear power stations—fitness for service and life management perspective, Tribol. Int., 39, 1294, 10.1016/j.triboint.2006.02.052 Pettigrew, 2003, Vibration analysis of shell-and-tube heat exchangers: an overview—part 1: flow, damping, fluidelastic instability, J. Fluids Struct., 18, 469, 10.1016/j.jfluidstructs.2003.08.007 Kai, 1989, The effects of heat treatment on the sensitization and SCC behavior of INCONEL 600 alloy, Metall. Mater. Trans. A, 20, 1077, 10.1007/BF02650143 Wang, 2001, Effects of grain boundary carbides on the mechanical properties of Inconel 600, Mater. Chem. Phys., 70, 124, 10.1016/S0254-0584(00)00484-3 Shalaby, 1988, Corrosion fatigue behavior of Alloy 600 in high-salinity brine, Corrosion, 44, 905, 10.5006/1.3584964 Stiller, 1996, Structure, chemistry, and stress corrosion cracking of grain boundaries in alloys 600 and 690, Metall. Mater. Trans. A, 27, 327, 10.1007/BF02648410 Hwang, 2007, Transgranular SCC mechanism of thermally treated alloy 600 in alkaline water containing lead, Corros. Sci., 49, 3797, 10.1016/j.corsci.2007.03.040 Kim, 2003, Influence of contact shape and supporting condition on tube fretting wear, Wear, 255, 1183, 10.1016/S0043-1648(03)00068-1 Lgried, 2012, Electrochemical investigation of corrosion and wear interactions under fretting conditions, Wear, 282–283, 52, 10.1016/j.wear.2012.02.001 Li, 2013, Effects of displacement amplitude on fretting wear behaviors and mechanism of Inconel 600 alloy, Wear, 304, 223, 10.1016/j.wear.2013.04.027 Hong, 2005, Microstructural effects on the fretting wear of Inconel 690 steam generator tube, Wear, 259, 349, 10.1016/j.wear.2004.12.007 Lim, 2003, Friction and wear of Inconel 690 and Inconel 600 for steam generator tube in room temperature water, Nucl. Eng. Des., 226, 97, 10.1016/S0029-5493(03)00187-0 Varenberg, 2004, Slip index: a new unified approach to fretting, Tribol. Lett., 17, 569, 10.1023/B:TRIL.0000044506.98760.f9 Barril, 2002, A tribo-electrochemical apparatus for in vitro investigation of fretting–corrosion of metallic implant materials, Wear, 252, 744, 10.1016/S0043-1648(02)00027-3 Barril, 2002, A tribo-electrochemical apparatus for in vitro investigation of fretting–corrosion of metallic implant materials, Wear, 252, 744, 10.1016/S0043-1648(02)00027-3 Diomidis, 2011, Third body effects on friction and wear during fretting of steel contacts, Tribol. Int., 44, 1452, 10.1016/j.triboint.2011.02.013 Hall, 1985, The microstructural response of mill-annealed and solution-annealed INCONEL 600 to heat treatment, Metall. Trans. A, 16, 1225, 10.1007/BF02670327 Cheng, 2011, Reaction for the decomposition of austenite into pearlitic lamellae of ferrite and M23C6 carbide in a Mn–Al steel, Metall. Mater. Trans. A, 42, 1760, 10.1007/s11661-010-0597-4 Zhu, 2011, On the mechanisms of various fretting wear modes, Tribol. Int., 44, 1378, 10.1016/j.triboint.2011.02.010 Lee, 2002, The effect of subsurface deformation on the wear behavior of steam generator tube materials, Wear, 253, 438, 10.1016/S0043-1648(02)00157-6 Suh., 1973, The delamination theory of wear, Wear, 25, 111, 10.1016/0043-1648(73)90125-7 McClintock, 1966, Ductile fracture by hole growth in shear bands, Int. J. Fract. Mech., 2, 614, 10.1007/BF00184558