Effect of pre-oxidation on surface scale microstructure and electrical property of Cu-Fe coated steel interconnect

Yang, 2003, Selection and evaluation of heat-resistant alloys for SOFC interconnect applications, J. Electrochem. Soc., 150, A1188, 10.1149/1.1595659 Miguel-Pérez, 2012, Oxide scale formation on different metallic interconnects for solid oxide fuel cells, Corros. Sci., 60, 38, 10.1016/j.corsci.2012.04.014 Hilpert, 1996, Chromium vapor species over solid oxide fuel cell interconnect materials and their potential for degradation processes, J. Electrochem. Soc., 143, 3642, 10.1149/1.1837264 Kulikovsky, 2011, A model for Cr poisoning of SOFC cathode, J. Electrochem. Soc., 158, B253, 10.1149/1.3526321 Wongpromrat, 2016, Reduction of chromium volatilisation from stainless steel interconnector of solid oxide electrochemical devices by controlled preoxidation, Corros. Sci., 106, 172, 10.1016/j.corsci.2016.02.002 Yang, 2004, Structure and conductivity of thermally grown scales on ferritic Fe-Cr-Mn steel for SOFC interconnect applications, J. Electrochem. Soc., 151, A1825, 10.1149/1.1797031 Wang, 2011, Interactions between SOFC interconnect coating materials and chromia, J. Am. Ceram. Soc., 94, 4490, 10.1111/j.1551-2916.2011.04749.x Fergus, 2005, Metallic interconnects for solid oxide fuel cells, Mater. Sci. Eng. A, 397, 271, 10.1016/j.msea.2005.02.047 Hsu, 2016, Development of advanced metallic alloys for solid oxide fuel cell interconnector application, J. Alloys. Compd., 656, 903, 10.1016/j.jallcom.2015.10.029 Shaigan, 2010, A review of recent progress in coatings, surface modifications and alloy developments for solid oxide fuel cell ferritic stainless steel interconnects, J. Power Sources, 195, 1529, 10.1016/j.jpowsour.2009.09.069 Huang, 2001, Reduced area specific resistance for iron-based metallic interconnects by surface oxide coatings, Mater. Res. Bull., 36, 81, 10.1016/S0025-5408(01)00506-2 Qu, 2006, Yttrium, cobalt and yttrium/cobalt oxide coatings on ferritic stainless steels for SOFC interconnects, J. Power Sources, 157, 335, 10.1016/j.jpowsour.2005.07.052 Szymczewska, 2014, Ceria based protective coatings for steel interconnects prepared by spray pyrolysis, Procedia Eng., 98, 93, 10.1016/j.proeng.2014.12.493 Yang, 2006, Evaluation of perovskite overlay coatings on ferritic stainless steels for SOFC interconnect applications, J. Electrochem. Soc., 153, A1852, 10.1149/1.2239371 Pyo, 2011, Characteristic of (La0.8Sr0.2)0.98MnO3 coating on Crofer22APU used as metallic interconnects for solid oxide fuel cell, Int. J. Hydrogen Energy, 36, 1868, 10.1016/j.ijhydene.2010.01.093 Shong, 2011, Effects of lanthanum-based perovskite coatings on the formation of oxide scale for ferritic SOFC interconnect, Mater. Chem. Phys., 127, 45, 10.1016/j.matchemphys.2010.12.004 Petric, 2007, Electrical conductivity and thermal expansion of spinels at elevated temperatures, J. Am. Ceram. Soc., 90, 1515, 10.1111/j.1551-2916.2007.01522.x Zhu, 2003, Development of interconnect materials for solid oxide fuel cells, Mater. Sci. Eng. A, 348, 227, 10.1016/S0921-5093(02)00736-0 Fu, 2012, Magnetron-sputtered cobalt-based protective coatings on ferritic steels for solid oxide fuel cell interconnect applications, Corros. Sci., 54, 68, 10.1016/j.corsci.2011.08.051 Mah, 2017, Metallic interconnects for solid oxide fuel cell: a review on protective coating and deposition techniques, Int. J. Hydrogen Energy, 42, 9219, 10.1016/j.ijhydene.2016.03.195 Kim, 2018, Suppression of Cr evaporation by Co electroplating and underlying Cr retention mechanisms for the 22 wt.% Cr containing ferritic stainless steel, Corros. Sci., 130, 45, 10.1016/j.corsci.2017.10.019 Paustenbach, 2013, A review of the health hazards posed by cobalt, Crit. Rev. Toxicol., 43, 316, 10.3109/10408444.2013.779633 Zhang, 2012, Cu-Fe spinel coating as oxidation barrier for Fe-16Cr metallic interconnect in solid oxide fuel cells, J. Electrochem. Soc., 159, C388, 10.1149/2.021209jes Grolig, 2015, Copper Iron conversion coating for solid oxide fuel cell interconnects, J. Power Sources, 297, 534, 10.1016/j.jpowsour.2015.06.139 Hosseini, 2016, Oxidation and electrical behavior of CuFe2O4 spinel coated Crofer 22 APU stainless steel for SOFC interconnect application, Solid State Ion., 289, 95, 10.1016/j.ssi.2016.02.015 Geng, 2019, CuFe2O4 protective and electrically conductive coating thermally converted from sputtered CuFe alloy layer on SUS 430 stainless steel interconnect, Int. J. Hydrogen Energy, 44, 9400, 10.1016/j.ijhydene.2019.02.117 Ravinder, 2004, Electrical conductivity of chromium substituted copper ferrites, J. Alloys. Compd., 370, L17, 10.1016/j.jallcom.2003.09.126 Geng, 2017, Sputtered MnCu metallic coating on ferritic stainless steel for solid oxide fuel cell interconnects application, Int. J. Hydrogen Energy, 42, 10298, 10.1016/j.ijhydene.2017.01.178 Macauley, 2011, The influence of pre-treatment on the oxidation behavior of Co coated SOFC interconnects, Int. J. Hydrogen Energy, 36, 4540, 10.1016/j.ijhydene.2010.04.113 Amendola, 2012, Oxidation behavior of coated and preoxidized ferritic steel in single and dual atmosphere exposures at 800°C, Surf. Coat. Technol., 206, 2173, 10.1016/j.surfcoat.2011.09.054 Zhao, 2019, Influence of preoxidation on high temperature behavior of NiFe2 coated SOFC interconnect steel, Int. J. Hydrogen Energy, 44, 13744, 10.1016/j.ijhydene.2019.03.203 Geng, 2010, Evaluation of electrodeposited Fe-Ni alloy on ferritic stainless steel solid oxide fuel cell interconnect, J. Power Sources, 195, 3256, 10.1016/j.jpowsour.2009.12.007 Swaminathan, 2018, Effects of alloyed La, Cu and B on the oxidation of Fe-22Cr ferritic stainless steels under simulated cathode side atmosphere of solid oxide fuel cell interconnects, Corros. Sci., 133, 150, 10.1016/j.corsci.2018.01.025 Lobnig, 1992, Diffusion of cations in chromia layers grown on iron-base alloys, Oxid. Met., 37, 81, 10.1007/BF00665632 Lee, 2015, Effect of substrate roughness and working pressure on photocatalyst of N-doped TiOx films prepared by reactive sputtering with air, Appl. Surf. Sci., 324, 339, 10.1016/j.apsusc.2014.10.173 Xiao, 2018, Effect of roughness of substrate and sputtering power on the properties of TiN coatings deposited by magnetron sputtering for ATF, J. Nucl. Mater., 509, 542, 10.1016/j.jnucmat.2018.07.011 Ostadi, 2020, The effect of temperature and roughness of the substrate surface on the microstructure and adhesion strength of EB-PVD ZrO2-%8wtY2O3 coating, Ceram. Int., 46, 2287, 10.1016/j.ceramint.2019.09.217 Zhao, 2020, Initial oxidation behavior of ferritic stainless steel interconnect with sputtered NiFe2 alloy coating, Oxid. Met., 93, 283, 10.1007/s11085-019-09954-6 Karczewski, 2019, High-temperature kinetics study of 430L steel powder oxidized in air at 600-850 °C, Corros. Sci., 149, 100, 10.1016/j.corsci.2019.01.005 Fontana, 2009, Metallic interconnects for solid oxide fuel cell: effect of water vapour on oxidation resistance of differently coated alloys, J. Power Sources, 193, 136, 10.1016/j.jpowsour.2008.11.041 Gesmundo, 1998, The air oxidation of two-phase Fe-Cu alloys at 600-800°C, Oxid. Met., 49, 115, 10.1023/A:1018861804007 Lee, 1998, Reduced optical losses in MOCVD grown lithium niobate thin films on sapphire by controlling nucleation density, J. Cryst. Growth, 186, 594, 10.1016/S0022-0248(97)00593-9 Zhou, 2004, In situ UHV-TEM investigation of the kinetics of initial stages of oxidation on the roughened Cu(110) surface, Surf. Sci., 559, 100, 10.1016/j.susc.2004.04.046 Hoyt, 2012, Oxidation behavior of (Co,Mn)3O4 coatings on preoxidized stainless steel for solid oxide fuel cell interconnects, Int. J. Hydrogen Energy, 37, 518, 10.1016/j.ijhydene.2011.09.028 Ou, 2014, Effect of pre-oxidation on the oxidation resistance of spinel-coated Fe-Cr ferritic alloy for solid oxide fuel cell applications, J. Power Sources, 247, 84, 10.1016/j.jpowsour.2013.08.074 Gingasu, 2008, Tetragonal copper ferrite obtained by self-propagating combustion, J. Alloys. Compd., 460, 627, 10.1016/j.jallcom.2007.06.039 Tang, 2016, Cubic and tetragonal ferrite crystal structures for copper ion immobilization in an iron-rich ceramic matrix, RSC Adv., 6, 28579, 10.1039/C6RA00168H Ohnishi, 1959, On the transition temperature of copper ferrite, J. Phys. Soc. Jpn., 14, 10.1143/JPSJ.14.106 Prabhu, 2011, Grain size effect on the phase transformation temperature of nanostructured CuFe2O4, J. Appl. Phys., 109, 1, 10.1063/1.3493244 Mosaad, 1995, Semiconductive properties of Cu;Cr ferrites, J. Magn. Magn. Mater., 150, 51, 10.1016/0304-8853(95)00102-6 Plyasova, 2018, Cation distribution in CuFe2-xCrxO4 spinels studied by neutron diffraction and its effect on catalytic properties in water gas shift reaction, Mater. Chem. Phys., 211, 278, 10.1016/j.matchemphys.2018.02.048 Popescu, 2015, Study of the electrical and catalytic properties of spinels with CuFe2-xMnxO4 composition (x=0, 0.4, 0.8, 1.6 and 2), Appl. Catal. A Gen., 504, 29, 10.1016/j.apcata.2014.09.048 Khaleghi, 2018, Cation distributions and magnetic properties of Cu-Doped nanosized MnFe2O4 synthesized by the coprecipitation method, IEEE Trans. Magn., 54, 1, 10.1109/TMAG.2017.2761320 Simon, 2017, Effect of atmosphere and sample thickness on kinetics, microstructure, and compressive stresses of chromia scale grown on Ni–25Cr, Oxid. Met., 87, 417, 10.1007/s11085-016-9702-4 Alnegren, 2016, Degradation of ferritic stainless steels under conditions used for solid oxide fuel cells and electrolyzers at varying oxygen pressures, Corros. Sci., 110, 200, 10.1016/j.corsci.2016.04.030 Kofstad, 1995, Defects and transport properties of metal oxides, Oxid. Met., 44, 3, 10.1007/BF01046721 Tsai, 1996, Growth mechanism of Cr2O3 scales: oxygen and chromium diffusion, oxidation kinetics and effect of yttrium, Mater. Sci. Eng. A, 212, 6, 10.1016/0921-5093(96)10173-8 Lv, 2017, Evaluation of electroplated copper coating on ferritic stainless steel for solid oxide fuel cells interconnects, J. Alloys. Compd., 726, 269, 10.1016/j.jallcom.2017.07.318 Samsonov, 1982 Hosseini, 2014, Microstructural characterization and electrical conductivity of CuxMn3−xO4 (0.9≤x≤1.3) spinels produced by optimized glycine–nitrate combustion and mechanical milling processes, Ceram. Int., 40, 12219, 10.1016/j.ceramint.2014.04.065 Ramachandran, 2016, One pot polyol synthesis of CuO-CuFe2O4 nanocomposites and their structural, optical and electrical property studies, Mater. Lett., 175, 106, 10.1016/j.matlet.2016.03.134