Effect of plasma nitriding of a stop hole along the fatigue crack path on crack propagation

L. de C.F. Canale, R.A. Mesquita, G. E. Totten, Failure Analysis of Heat Treated Steel Components., ASM Internationa, Ohio, 2008. 177-223. Ralph, 2007, Fatigue performance of production-quality aircraft fastener holes, Int. J. Fatigue, 29, 1319, 10.1016/j.ijfatigue.2006.10.016 Pasta, 2007, Fatigue crack propagation from a cold-worked hole, Eng. Fract. Mech., 74, 1525, 10.1016/j.engfracmech.2006.08.006 Song, 2004, Stop drilling procedure for fatigue life improvement, Int. J. Fatigue, 26, 1333, 10.1016/j.ijfatigue.2004.04.009 Stuart, 2011, Correlation of one-dimensional fatigue crack growth at cold-expanded holes using linear fracture mechanics and superposition, Eng. Fract. Mech., 78, 1389, 10.1016/j.engfracmech.2011.02.016 D.L. DuQuesnay, M.T. Yu, TH Topper, The effect of notch radius on the fatigue notch factor and the propagation of short cracks. In: Miller KJ, de los Rios ER, editors. The behaviour of short fatigue cracks. Mechanical Engineering Publications; London, 1986, 323–335. Lorenzino, 2015, Growth of very long “short cracks” initiated at holes, Int. J. Fatigue, 71, 64, 10.1016/j.ijfatigue.2014.03.023 J. Schijve, Fatigue of Structures and Materials, Springer, Delfth, 2009. https://doi.org/10.1007/978-1-4020-6808-9. Chaves, 2017, Biaxial fatigue limits and crack directions for stainless steel specimens with circular holes, Eng. Fract. Mech., 174, 139, 10.1016/j.engfracmech.2016.11.022 Wu, 2010, On the reduction of the residual fatigue life of cracked structures repaired by the stop-hole method, Int. J. Fatigue, 32, 670, 10.1016/j.ijfatigue.2009.09.011 Ghfiri, 2000, Fatigue life estimation after crack repair in 6005 AT-6 aluminum alloy using the cold expansion hole technique, Fatigue Fract. Eng. Mater. Struct., 23, 911, 10.1046/j.1460-2695.2000.00356.x Makabe, 2009, Crack-growth arrest by redirecting crack growth by drilling stop holes and inserting pins into them, Eng. Fail. Anal., 16, 475, 10.1016/j.engfailanal.2008.06.009 Ayatollahi, 2014, Fatigue life extension by crack repair using stop-hole technique under pure mode-I and pure mode-II, Procedia Eng., 74, 18, 10.1016/j.proeng.2014.06.216 Baxter, 1990, Finite element prediction of high cycle fatigue life of aluminum alloys, Metall. Mater. Trans. A, 21, 1151, 10.1007/BF02698246 Lee, 2011, Hubbard A study on fatigue crack growth behavior subjected to a single tensile overload Part I. An overload-induced transient crack growth micromechanism, Acta Mater., 59, 485, 10.1016/j.actamat.2010.09.049 Şengül, 2011, Effect of plasma nitriding on fatigue crack growth on AISI 4140 steel under variable amplitude loading, Surf. Coat. Technol., 205, 5172, 10.1016/j.surfcoat.2011.05.027 Babu, 2014, Evaluation of fatigue crack growth behaviour of SS 316 LN steel under mixed mode loading (Mode I & II), Procedia Eng., 86, 639, 10.1016/j.proeng.2014.11.064 Feng, 2006, A study of loading path influence on fatigue crack growth under combined loading, Int. J. Fatigue, 28, 19, 10.1016/j.ijfatigue.2005.04.002 Garcia, 2016, Fatigue crack growth in residual stress fields, Int. J. Fatigue, 87, 326, 10.1016/j.ijfatigue.2016.02.020 Pye, 2003, Practical nitriding and ferritic nitrocarburizing, ASM Int. Novelty Ohio Çelik, 1995, Improvement of the fatigue strength of AISI 4140 steel by an ion nitriding process, Surf. Coat. Technol., 72, 169, 10.1016/0257-8972(94)02348-4 de La Cruz, 1998, Influence of plasma nitriding on fatigue strength and fracture of a B-Mn steel, Mat Sci Eng A, 242, 181, 10.1016/S0921-5093(97)00518-2 Şengül, 2012, Fatigue crack growth retardation by the number of different OLR, J Fac Eng Arch Gazi Univ., 27, 707 Sengül, 2014, Combined effects of different overload ratiosand nitriding process on fatigue crack growth of AISI 4140 steel, J. Iron Steel Res. Int., 21, 797, 10.1016/S1006-706X(14)60144-8 E647 Committee, Standard Test Method for Measurement of Fatigue Crack Growth Rates, ASTM International, West Conshohocken, 2016. Domazet, 1996, Comparison of fatigue crack retardation methods, Eng. Fail. Anal., 3, 137, 10.1016/1350-6307(96)00006-4 Shin, 1996, Fatigue damage repair: a comparison of some possible methods, Int. J. Fatigue, 18, 525, 10.1016/S0142-1123(96)00029-1 Goto, 1996, Crack growth arresting property of a hole and brinel-type dimple, Fatigue Fract. Eng. Mater. Struct., 19, 39, 10.1111/j.1460-2695.1996.tb00930.x M.L. Landy, H.J. Armen, H.L. Eidinoff, Enhanced stop-drill repair procedure for cracked structures, fatigue in mechanically fastened composite metallic joints. ASTM STP 927, American Society for Testing and Materials, Philadelphia, PA, USA, 1986, 190–220. http://onlinelibrary.wiley.com/wol1/doi/10.1046/j.1460-2695.2000.00356.x/fullpdf. M. Endo, The multiaxial fatigue strength of specimens containing small defects. In: Carpinteri A, de Freitas M, Spagnoli A, editors. Biaxial/multiaxial fatigue and fracture. Elsevier Science and ESIS. Lisbon, 2003, 243–264. Backman, 2012, Effect of cold working on crack growth from holes in fiber metal laminates, Exp. Mech., 52, 1033, 10.1007/s11340-011-9553-5 Lakshmi Aparna, 2015, Fatigue testing of continuous GFRP composites using digital image correlation (DIC) technique a review, Mater Today Proceedings, 2, 3125, 10.1016/j.matpr.2015.07.275 Ma, 2021, Progressive fracture analysis of the open-hole composite laminates: experiment and simulation, Compos. Struct., 262, 10.1016/j.compstruct.2021.113628 Schajer, 2013, Hole-drilling residual stress measurement with artifact correction using full-field DIC, Exp. Mech., 53, 255, 10.1007/s11340-012-9626-0 Podgornik, 2013, The effect of heat treatment on the mechanical, tribological and load-carrying properties of PACVD-coated tool steel, Surf. Coat. Technol., 232, 528, 10.1016/j.surfcoat.2013.06.019 A. Ross and V.L. Willson, Basic and Advanced Statistical Tests, Sense Publisher, Rotterdam, 2017, 17-21, https://doi.org/10.1007/9789463510868_005. Cohen, 1992, A power primer, Psychol. Bull., 112, 155, 10.1037/0033-2909.112.1.155