Effect of nicotinic acid additives on the electrodeposition of Al-Mn alloy from AlCl3-based ionic liquids

Ionics - 2022
Jingling Lu1, Cunying Xu1, Jianru Li1, Shuxian Wang1, Qinqin Xiang1, Xiao Chen1, Yixin Hua1, Yan Li1
1Faculty of Metallurgical and Energy Engineering, Kunming University of Science and Technology, Kunming, People’s Republic of China

Tóm tắt

The effects of nicotinic acid (NA) on the electrodeposition of Al-Mn alloy have been investigated in aluminum chloride-1-butyl-3-methylimidazolium ionic liquids (AlCl3-BMIC) containing 0.15 mol·L−1 MnCl2 (AlCl3-BMIC-MnCl2). The electrochemical behaviors of the AlCl3-BMIC-MnCl2 electrolyte have been studied here using cyclic voltammetry and potentiodynamic polarization. The addition of NA obviously increased the nucleation overpotential of Al-Mn alloy and inhibited the reduction reaction of Al(III) and Mn(II). The resultant surface morphologies, composition, and roughness of the Al-Mn alloy coating were revealed by scanning electron microscopy (SEM), transmission electron microscope (TEM), and atomic force microscopy (AFM). It was found that these additives strongly affect the morphology, composition, roughness, and crystal structure of the Al-Mn alloy coating. With the addition of NA, the content of Mn decreased, and Al-Mn alloy coatings became more uniform and smoother. The crystal structure of Al-Mn coatings was also examined by X-ray diffraction (XRD), where it was found that the phase composition of the deposits depends on the quantities of additives. For electrolyte containing little or no NA additives, the resulting alloy is amorphous structure. With NA additives up to 6·mmol L−1, the Al-Mn coating changed into a mixture phase of amorphous and crystalline structure.

Từ khóa


Tài liệu tham khảo

Awayssa O, Haarberg GM, Meirbekova R, Saevarsdottir G (2021) Electrochemical production of Al-Mn alloys during the electrodeposition of aluminium in a laboratory cell. Electrochem Commun 125:106985

Yang J, Chang L, Jiang L, Wang K, Huang L, He Z, Shao H, Wang J, Cao CN (2017) Electrodeposition of Al-Mn-Zr ternary alloy films from the Lewis acidic aluminum chloride-1-ethyl-3-methylimidazolium chloride ionic liquid and their corrosion properties. Surf Coat Technol 321:45–51

Mraied H, Cai W, Sagüés AA (2016) Corrosion resistance of Al and Al-Mn thin films. Thin Solid Films 615:391–401

Liu F, Chen X, Gu Y, Ma C, Han X, Deng Y, Hu W, Zhong C (2016) Effect of pretreatment and annealing on aluminum coating prepared by physical vapor deposition on AZ91D magnesium alloys. Int J Electrochem Sci 11:5655–5668

Psarellis GM, Aviziotis IG, Duguet T, Vahlas C, Koronaki ED, Boudouvis AG (2018) Investigation of reaction mechanisms in the chemical vapor deposition of al from DMEAA. Chem Eng Sci 177:464–470

Tian GC (2019) Ionic liquids as green electrolytes for aluminum and aluminum-alloy production. Mater Res Found 54:249

Fengguo L, Bo W, Lianyu Z, Aimin L, Zhaowen W (2004) Zhongning S (2021) Application of ionic liquids in aluminum and alloy electrodeposition. Progress in Chemistry 32(12)

Elterman VA, Shevelin PY, Yolshina LA, Borozdin AV (2021) Electrodeposition of aluminium from the chloroaluminate ionic liquid 1-ethyl-3-methylimidazolium chloride. Electrochimica Acta 389:138715

Ueda M (2017) Overview over studies of electrodeposition of Al or Al alloys from low temperature chloroaluminate molten salts. J Solid State Electrochem 21(3):641–647

Ruan S, Schuh CA (2009) Electrodeposited Al-Mn alloys with microcrystalline, nanocrystalline, amorphous and nano-quasicrystalline structures. Acta Mater 57(13):3810–3822

Loukil N, Feki M (2021) Effect of sodium diisopropylnaphthalene sulfonate on Zn-Mn alloys electrodeposition. J Solid State Electrochem 25(1):339–350

Maniam KK, Paul S (2021) A review on the electrodeposition of aluminum and aluminum alloys in ionic liquids. Coatings 11(1):80

Barchi L, Bardi U, Caporali S, Fantini M, Scrivani A, Scrivani A (2010) Electroplated bright aluminium coatings for anticorrosion and decorative purposes. Prog Org Coat 67(2):146–151

Wang Q, Chen B, Zhang Q, Lu X, Zhang S (2015) Aluminum deposition from lewis acidic 1-butyl-3-methylimidazolium chloroaluminate ionic liquid ([Bmim]Cl/AlCl3) modified with methyl nicotinate. ChemElectroChem 2(11):1794–1798

Guinea E, Salicio-Paz A, Iriarte A, Grande HJ, Medina E, García-Lecina E (2019) Robust aluminum electrodeposition from ionic liquid electrolytes containing light aromatic naphta as additive. ChemistryOpen 8(8):1094

Liu L, Lu X, Cai Y, Zheng Y, Zhang S (2012) Influence of additives on the speciation, morphology, and nanocrystallinity of aluminium electrodeposition. Aust J Chen 65(11):1523–1528

Zhu Q, Hussey CL (2002) Galvanostatic pulse plating of bulk Cu-Al alloys on nickel electrodes from room-temperature chloroaluminate molten salts containing benzene. J Electrochem Soc 149(5):C268

Wang S, Pei Q, Xu C, Hua Y, Zhang Q, Li Y, Ren X, Ru J (2021) Effects of cuprous ion on electrodeposition of aluminum from AlCl3-BMIC ionic liquid. J Electrochem Soc 168(1):012502

Mraied H, Tran TH, Cai W (2016) Fabrication and deformation of aluminum-manganese microsandwich structure. J Mater Res 31(4):480–487

Abdul-Sada AK, Greenway AM, Seddon KR, Welton T (1992) Fast atom bombardment mass spectrometric evidence for the formation of tris {tetrachloroaluminate(III)} metallate(II) anions, [M(AlCl4)3]-, in acidic ambient-temperature ionic liquids. Organic Mass Spectrom 27(5):648–649

Dent AJ, Seddon KR, Welton T (1990) The structure of halogenometallate complexes dissolved in both basic and acidic room-temperature halogenoaluminate(III) ionic liquids, as determined by EXAFS. J Chem Society Chem Commun 4:315–316

Yao T, Yang H, Wang K, Wu W, Jiang H, Liu H, Wang Q, Ding W (2020) Electrodeposition of aluminum coatings from AlCl3-NaCl-KCl molten salts with TMACl and NaI additives. Materials 13(23):5506

Zhang Q, Hua Y (2009) Effects of [HMIM]HSO4 and [OMIM]HSO4 on the electrodeposition of zinc from sulfate electrolytes. J Appl Electrochem 39(8):1185–1192

Peng D, Cong D, Song K, Ding X, Wang X, Bai Y, Yang X, Yin C, Zhang Y, Rao J, Zhang M, Li Z (2021) Mirror-like bright Al-Mn coatings electrodeposition from 1-Ethyl-3 methylimidazolium chloride-AlCl3-MnCl2 ionic liquids with pyridine derivatives. Materials 14(20):6226

Endres F (2010) The interface ionic liquid (s)/metal electrode (s): investigation of the complex solvation and electrochemical double layers by in situ scanning probe microscopy. ECS Meeting Abstracts 34: 2059 IOP Publishing

Qi L, Liao W, Bi Z (2005) Adsorption investigation of two surfactants at solid/aqueous interface by a cyclic voltammetry method. Colloid Surface A 257:429–432

Madore C, Landolt D (1996) Blocking inhibitors in cathodic leveling: II. Experimental Investigation. J Electrochem Soc 143(12):3936

Li H, Le Qing C, Wei SQ, Jiang XJ (2004) An approach to the method for determination of surface potential on solid/liquid interface: theory. J Colloid Interf Sci 275(1):172–176

Ohba M, Scarazzato T, Espinosa DCR, Panossian Z (2019) Study of metal electrodeposition by means of simulated and experimental polarization curves: zinc deposition on steel electrodes. Electrochim Acta 309:86–103

Zhang Q, Wang Q, Zhang S, Lu X (2014) Effect of nicotinamide on electrodeposition of Al from aluminium chloride (AlCl3)-1-butyl-3-methylimidazolium chloride([Bmim]Cl) ionic liquids. J Solid State Electr 18(1):257–267

Alesary HF, Ismail HK, Shiltagh NM, Alattar RA, Ahmed LM, Watkins MJ, Ryder KS (2020) Effects of additives on the electrodeposition of ZnSn alloys from choline chloride/ethylene glycol-based deep eutectic solvent. J Electroanal Chem 874:114517

Fashu S, Gu C, Zhang J, Huang M, Wang X, Tu J (2015) Effect of EDTA and NH4Cl additives on electrodeposition of Zn–Ni films from choline chloride-based ionic liquid. Trans Nonferr Met Soc China 25(6):2054–2064

Zhang J, Zhang W, Yan C, Du K, Wang F (2009) Corrosion behaviors of Zn/Al–Mn alloy composite coatings deposited on magnesium alloy AZ31B (Mg–Al–Zn). Electrochim Acta 55(2):560–571

Stafford GR, Tsuda T, Hussey CL (2014) The structure of electrodeposited aluminum alloys from chloroaluminate ionic liquids: let’s not ignore the temperature. ECS Transactions 64(4):535

Li JC, Nan SH, Jiang Q (1998) Study of the electrodeposition of Al–Mn amorphous alloys from molten salts. Surf Coat Technol 106(2-3):135–139

Grushko B, Stafford GR (1989) Structural study of electrodeposited aluminum-manganese alloys. Metall Trans A 20(8):1351–1359

Thông tin
Thông tin xuất bản

Ionics

Thông tin tác giả