Effect of natural convection hybrid nanofluid flow on the migration and deposition of MWCNT-Fe3O4 in a square enclosure

Choi, 1995 Sarkar, 2015, A review on hybrid nanofluids: recent research, development and applications, Renew. Sustain. Energy Rev., 43, 164, 10.1016/j.rser.2014.11.023 Sundar, 2017, Hybrid nanofluids preparation, thermal properties, heat transfer and friction factor–a review, Renew. Sustain. Energy Rev., 68, 185, 10.1016/j.rser.2016.09.108 Babu, 2017, State-of-art review on hybrid nanofluids, Renew. Sustain. Energy Rev., 77, 551, 10.1016/j.rser.2017.04.040 Mahian, 2019, Recent advances in modeling and simulation of nanofluid flows-Part I: Fundamentals and theory, Phys. Rep., 790, 1, 10.1016/j.physrep.2018.11.004 Eshgarf, 2021, A review on the properties, preparation, models and stability of hybrid nanofluids to optimize energy consumption, J. Therm. Anal. Calorim., 144, 1959, 10.1007/s10973-020-09998-w Michaelides, 2006 Michaelides, 2016 Bahiraei, 2016, Particle migration in nanofluids: a critical review, Int. J. Therm. Sci., 109, 90, 10.1016/j.ijthermalsci.2016.05.033 Sheremet, 2021, Mixed convection in a chamber saturated with MWCNT-Fe3O4/water hybrid nanofluid under the upper wall velocity modulation, Eur. Phys. J. Plus, 136, 1, 10.1140/epjp/s13360-021-01189-2 Saleh, 2021, Thermal efficiency, heat transfer, and friction factor analyses of MWCNT+ Fe3O4/water hybrid nanofluids in a solar flat plate collector under thermosyphon condition, Processes, 9, 180, 10.3390/pr9010180 Mehryan, 2019, Natural convection of multi-walled carbon nanotube–Fe3O4/water magnetic hybrid nanofluid flowing in porous medium considering the impacts of magnetic field-dependent viscosity, J. Therm. Anal. Calorim., 138, 1541, 10.1007/s10973-019-08164-1 Mohebbi, 2019, Effect of MWCNT–Fe3O4/water hybrid nanofluid on the thermal performance of ribbed channel with apart sections of heating and cooling, J. Therm. Anal. Calorim., 135, 3029, 10.1007/s10973-018-7483-5 Matori, 2019, Lattice Boltzmann study of multi-walled carbon nanotube (MWCNT)-Fe3O4/water hybrid nanofluids natural convection heat transfer in a Π-shaped cavity equipped by hot obstacle, J. Therm. Anal. Calorim., 136, 2495, 10.1007/s10973-018-7881-8 Izadi, 2018, Numerical simulation of natural convection heat transfer inside a ⊥ shaped cavity filled by a MWCNT-Fe3O4/water hybrid nanofluids using LBM, Chem. Eng. Process.-Process Intensif., 125, 56, 10.1016/j.cep.2018.01.004 Mourad, 2021, Galerkin finite element analysis of thermal aspects of Fe3O4-MWCNT/water hybrid nanofluid filled in wavy enclosure with uniform magnetic field effect, Int. Commun. Heat Mass Transfer, 126, 10.1016/j.icheatmasstransfer.2021.105461 Izadi, 2019, Coupled FHD–MHD free convection of a hybrid nanoliquid in an inversed T-shaped enclosure occupied by partitioned porous media, Numer. Heat Transfer A, 76, 479, 10.1080/10407782.2019.1637626 Sajjadi, 2019, Investigation of MHD natural convection in a porous media by double MRT lattice Boltzmann method utilizing MWCNT–Fe3O4/water hybrid nanofluid, Int. J. Heat Mass Transfer, 132, 1087, 10.1016/j.ijheatmasstransfer.2018.12.060 Alsarraf, 2019, Effect of magnetic field on laminar forced convective heat transfer of MWCNT–Fe3O4/water hybrid nanofluid in a heated tube, J. Therm. Anal. Calorim., 137, 1809, 10.1007/s10973-019-08078-y Shahsavar, 2019, Free convection heat transfer and entropy generation analysis of water-Fe3O4/CNT hybrid nanofluid in a concentric annulus, Internat. J. Numer. Methods Heat Fluid Flow, 10.1108/HFF-08-2018-0424 Çiçek, 2020, Entropy generation of mixed convection of SWCNT–water nanofluid filled an annulus with a rotating cylinder and porous lining under LTNE, Internat. J. Numer. Methods Heat Fluid Flow Çiçek, 2021, Nanofluid jet impingement heating of a cooled surface with a constant heat flux in the presence of porous layer, Internat. J. Numer. Methods Heat Fluid Flow Swain, 2022, Influence of MWCNT/Fe3O4 hybrid nanoparticles on an exponentially porous shrinking sheet with chemical reaction and slip boundary conditions, J. Therm. Anal. Calorim., 147, 1561, 10.1007/s10973-020-10432-4 Maneengam, 2022, Numerical study of lid-driven hybrid nanofluid flow in a corrugated porous cavity in the presence of magnetic field, Nanomaterials, 12, 2390, 10.3390/nano12142390 Cui, 2022, Energy and exergy assessment of evacuated tube solar collector using water, Fe3O4/Water nanofluid and Fe3O4/Water/MWCNT hybrid nanofluid, Process Saf. Environ. Prot., 10.1016/j.psep.2022.05.023 Alklaibi, 2022, Experimental investigation on the performance of hybrid Fe3O4/Water coated MWCNT/Water nanofluid as a coolant of a Plate heat exchanger, Int. J. Therm. Sci., 171, 10.1016/j.ijthermalsci.2021.107249 Li, 2021, Influences of imposed magnetic force on treatment of hybrid nanofluid involving non-Darcy porous model, Int. Commun. Heat Mass Transfer, 125, 10.1016/j.icheatmasstransfer.2021.105318 Bagheri, 2012, Simulation of solid particles behavior in a heated cavity at high Rayleigh numbers, Aerosol Sci. Technol., 46, 1382, 10.1080/02786826.2012.716550 Garoosi, 2015, Eulerian–Lagrangian modeling of solid particle behavior in a square cavity with several pairs of heaters and coolers inside, Powder Technol., 280, 239, 10.1016/j.powtec.2015.04.048 Afrouzi, 2015, Lattice Boltzmann analysis of micro-particles transport in pulsating obstructed channel flow, Comput. Math. Appl., 70, 1136, 10.1016/j.camwa.2015.07.008 Yin, 2018, Numerical and experimental studies of heat and flow characteristics in a laminar pipe flow of nanofluid, J. Exp. Nanosci., 13, 82, 10.1080/17458080.2017.1413599 Talebizadehsardari, 2019, Nano-particle deposition in axisymmetric annular pipes with thread, Particul. Sci. Technol. Ophoff, 2020, A numerical study on particle tracking and heat transfer enhancement in a solar cavity receiver, Appl. Therm. Eng., 180, 10.1016/j.applthermaleng.2020.115785 Talebizadehsardari, 2020, Nano-particle deposition in laminar annular pipe flows, Adv. Powder Technol., 31, 3134, 10.1016/j.apt.2020.06.005 Alsabery, 2021, Impact of particles tracking model of nanofluid on forced convection heat transfer within a wavy horizontal channel, Int. Commun. Heat Mass Transfer, 122, 10.1016/j.icheatmasstransfer.2021.105176 Sharaf, 2019, Numerical investigation of nanofluid particle migration and convective heat transfer in microchannels using an Eulerian–Lagrangian approach, J. Fluid Mech., 878, 62, 10.1017/jfm.2019.606 Ambreen, 2019, Numerical analysis of the heat transfer and fluid flow characteristics of a nanofluid-cooled micropin-fin heat sink using the Eulerian-Lagrangian approach, Powder Technol., 345, 509, 10.1016/j.powtec.2019.01.042 Albojamal, 2020, Analysis of particle deposition of nanofluid flow through porous media, Int. J. Heat Mass Transfer, 161, 10.1016/j.ijheatmasstransfer.2020.120227 Mohammadpour, 2021, Evaluation of Al2O3-Water nanofluid in a microchannel equipped with a synthetic jet using single-phase and Eulerian–Lagrangian models, Int. J. Therm. Sci., 161, 10.1016/j.ijthermalsci.2020.106705 Mortimer, 2019, Near-wall dynamics of inertial particles in dilute turbulent channel flows, Phys. Fluids, 31, 10.1063/1.5093391 Mofakham, 2019, Particles dispersion and deposition in inhomogeneous turbulent flows using continuous random walk models, Phys. Fluids, 31, 10.1063/1.5095629 Lu, 2021, A CFD study of particle deposition in three-dimensional heat exchange channel based on an improved deposition model, Int. J. Heat Mass Transfer, 178, 10.1016/j.ijheatmasstransfer.2021.121633 Lu, 2020, Numerical investigation on thermophoretic deposition of particles in turbulent duct flow with conjugate heat transfer: Analysis of influencing factors, 387 Xue, 2005, Model for thermal conductivity of carbon nanotube-based composites, Physica B, 368, 302, 10.1016/j.physb.2005.07.024 Tsorng, 2006, Three-dimensional tracking of the long time trajectories of suspended particles in a lid-driven cavity flow, Exp. Fluids, 40, 314, 10.1007/s00348-005-0070-0 Kosinski, 2009, Simulation of solid particles behaviour in a driven cavity flow, Powder Technol., 191, 327, 10.1016/j.powtec.2008.10.025 Akbar, 2009, Particle transport in a small square enclosure in laminar natural convection, J. Aerosol Sci., 40, 747, 10.1016/j.jaerosci.2009.04.007 Li, 1992, Dispersion and deposition of spherical particles from point sources in a turbulent channel flow, Aerosol Sci. Technol., 16, 209, 10.1080/02786829208959550 Talbot, 1980, Thermophoresis of particles in a heated boundary layer, J. Fluid Mech., 101, 737, 10.1017/S0022112080001905 Saffman, 1965, The lift on a small sphere in a slow shear flow, J. Fluid Mech., 22, 385, 10.1017/S0022112065000824 Patankar, 2018 Domínguez-Vázquez, 2021, Lagrangian models of particle-laden flows with stochastic forcing: Monte Carlo, moment equations, and method of distributions analyses, Phys. Fluids, 33, 10.1063/5.0039787 Boyce, 2021 Nasr, 2007, The effect of two-way coupling and inter-particle collisions on turbulence modulation in a vertical channel flow, Int. J. Heat Fluid Flow, 28, 1507, 10.1016/j.ijheatfluidflow.2007.03.007 Tsorng, 2006 Tsorng, 2008, Behaviour of macroscopic rigid spheres in lid-driven cavity flow, Int. J. Multiph. Flow., 34, 76, 10.1016/j.ijmultiphaseflow.2007.06.007