Effect of nano additives (titanium and zirconium oxides) and diethyl ether on biodiesel-ethanol fuelled CI engine

B. S. Chauhan, N. Kumar, H. M. Cho and H. C. Lim, A study on the performance and emission of a diesel engine fueled with Karanja biodiesel and its blends, Energy, 56 (2013) 1–7.

M. N. Nabi, Md. M. Rahman and M. S. Akhter, Biodiesel from cotton seed oil and its effect on engine performance and exhaust emissions, Applied Thermal Engineering, 29 (2009) 2265–2270.

H. An, W. M. Yang, A. Maghbouli, J. Li, S. K. Chou and K. J. Chua, Performance combustion and mission characteristics of biodiesel derived from waste cooking oils, Applied Energy, 112 (2013) 493–499.

O. Ozener, L. Yuksek, A. T. Ergenc and M. Ozkan, Effects of soybean biodiesel on a DI diesel engine performance, emission and combustion characteristics, Fuel, 115 (2014) 875–883.

P. Q. Tan, Z. Y. Hu, D. M. Lou and Z. J. Li, Exhaust emissions from a light-duty diesel engine with jatropha biodiesel fuel, Energy, 39 (2012) 356–362.

P. S. Mehta, K. Anand and R. P. Sharma, Experimental investigations on combustion, performance and emissions characteristics of neat karanji biodiesel and its methanol blend in a diesel engine, Biomass and Bioenergy, 35 (2011) 533–541.

A. M. Liaquat, H. H. Masjuki, M. A. Kalam, I. M. Rizwanul Fattah, M. A. Hazrat, M. Varman, M. Mofijur and M. Shahabuddin, Effect of coconut biodiesel blended fuels on engine performance and emission characteristics, Procedia Engineering, 56 (2013) 583–590.

D. B. Hulwan and S. V. Joshi, Performance emission and combustion characteristic of a multi cylinder DI diesel engine running on diesel–ethanol–biodiesel blends of high ethanol content, Applied Energy, 88 (2011) 5042–5055.

B. P. Singh, Performance and emission characteristics of conventional engine running on jatropha oil, Journal of Mechanical Science and Technology, 27 (8) (2013) 2569–2574.

M. Prabhahar and K. Rajan, Performance and combustion characteristics of a diesel engine with titanium oxide coated piston using Pongamia methyl ester, Journal of Mechanical Science and Technology, 27 (5) (2013) 1519–1526.

V. A. M. Selvam, R. B. Anand and M. Udayakumar, Effect of cerium oxide nanoparticle and carbon nanotube as fuelborne additives in dieseterol blends on the performance combustion and emission charactersistics of a variable compression ratio engine, Fuel, 130 (2014) 160–167.

J.-Y. Jung, J. W. Lee and Y. T. Kang, CO2 absorption characteristics of nanoparticle suspensions in methanol, Journal of Mechanical Science and Technology, 26 (8) (2012) 2285–2290.

K. Fangsuwannarak and K. Triratanasirichai, Improvements of palm biodiesel properties by using nano-TiO2 additive, exhaust emission and engine performance, The Romanian review precision mechanics, MECAHITECH’ 13, International Conference Bucharest, Romania, 43 (2013) 111–118.

V. Sajith, C. B. Sohban and G. P. Peterson, Experimental investigations on the effects of cerium oxide nanoparticle fuel additives on biodiesel, Advances in Mechanical Engineering, 36 (2010) 1–16.

D. Ganesh and G. Shankar, Effect of nanofluid additive on emission reduction in a biodiesel fuelled CI engine), International Conference on Electrical and Control Engineering (ICECE), IEEE (2011) 3453–3459.

N. Yilmaz, Performance and emission characteristics of a diesel engine fuelled with biodiesel–ethanol and biodiesel–methanol blends at elevated air temperatures, Fuel, 94 (2012) 440–443.

G. R. Kannan, R. Karvembu and R. Anand, Effect of metal based additive on performance emission and combustion characteristics of diesel engine fuelled with biodiesel, Applied Energy, 11 (88) (2011) 3694–3703.

H. Jung, D. B. Kittelson and M. R. Zachariah, The influence of a cerium additive on ultrafine diesel particle emissions and kinetics of oxidation, Combustion and Flame, 142 (2005) 276–288.

G. A. Risha, S. F. Son, R. A. Yetter, V. Yang and B. C. Tappan, Combustion of nano-aluminum and liquid water, Proceedings of the Combustion Institute, 31 (2007) 2029–2036.

G. Yanan and Q. Li, Combustion characteristics of fuel droplets with addition of nano and micron-sized aluminum particles, Combustion and Flame, 158 (2011) 354–368.

H. An, W. M. Yang and J. Li, Effects of ethanol addition on biodiesel combustion: A modeling study, Applied Energy, 143 (2015) 176–188.

N. Yilmaz and T. M. Sanchez, Analysis of operating a diesel engine on biodiesel-ethanol and biodiesel-methanol blends, Energy, 46 (2012) 126–129.

D. K. Das, D. P. Kulkarni, R. S. Vajjha and D. Oliva, Application of aluminum oxide nanofluids in diesel electric generator as jacket water coolant, Applied Thermal Engineering, 28 (2008) 1774–1781.

M. J. Kao, C. C. Ting, B. F. Lin and T. T. Tsung, Aqueous aluminum nanofluid combustion in diesel fuel, Journal of Testing and Evaluation, 36 (2) (2008) 186–190.

M. Guru, A. Keskin and D. Altiparmak, Influence of tall oil biodiesel with Mg and Mo based fuel additives on diesel engine performance and emission, Bioresource Technology, 99 (2008) 6434–6438.

P. Tewari, E. Doijode, N. R. Banapurmath and V. S. Yaliwal, Experimental investigations on a diesel engine fuelled with multi walled carbon nanotubes blended biodiesel fuels, International Journal of Emerging Technology and Advanced Engineering, 3 (3) (2013) 72–76.

H. G. Kim and S.-H. Choi, The characteristics of biodiesel and oxygenated additives in a compression ignition engine, Journal of Mechanical Science and Technology, 27 (5) (2013) 1539–1543.

I. Glassman, Combustion, Chapter 9, Third Ed., Academic Press. Orlando, USA (1996).

J. B. Heywood, Internal combustion engine fundamentals, McGraw Hill, New York, USA (1988) 339–342.

I. B. Askari, M. O. Sadegh and M. Ameri, Effect of heat storage and fuel price on energy management and economics of micro CCHP cogeneration systems, Journal of Mechanical Science and Technology, 28 (5) (2014) 2003–2014.

Y. Shin and Y. Kim, Numerical modeling for flame dynamics and combustion processes in a two-sectional porous burner with a detailed chemistry, Journal of Mechanical Science and Technology, 28 (11) (2014) 4797–4805.