Effect of laser energy density on microstructural evolution and wear resistance of modified aluminum bronze coatings fabricated by laser cladding

Zhang, 2020, Investigation into the manufacturing process and properties of BrAl10Fe4 Aluminum-bronze parts by selective laser melting, Mater. Technol., 35, 821, 10.1080/10667857.2019.1701254 Wharton, 2005, The corrosion of nickel-aluminum bronze in seawater, Corrosion Sci., 47, 3336, 10.1016/j.corsci.2005.05.053 Callcut, 1978, Aluminum Bronze, Eng. Mater. Des., 22, 25 Richardson, 2016 Culpan, 1979, Corrosion behaviour of cast nickel aluminum bronze in sea water, Br. Corrosion J., 14, 160, 10.1179/bcj.1979.14.3.160 Cook, 1952, Observations on the structure and properties of wrought copper-aluminum-nickel-iron alloys, J. Inst. Met., 80, 419 Murray, 2020, Selective laser melting of nickel aluminum bronze, Addit. Manuf., 33 Lloyd, 1980, Characterization of phases in a nickel-aluminum bronze, Met. Technol., 7, 114, 10.1179/030716980803286577 Chen, 2019, Laser cladding of nanoparticle TiC ceramic powder: effects of process parameters on the quality characteristics of the coatings and its prediction model, Opt Laser. Technol., 116, 345, 10.1016/j.optlastec.2019.03.048 Shayanfar, 2020, Parameters optimization for laser cladding of Inconel 625 on ASTM A592 steel, J. Mater. Res. Technol., 9, 10.1016/j.jmrt.2020.05.094 Emamian, 2011, The influence of combined laser parameters on in-situ formed TiC morphology during laser cladding, Surf. Coating. Technol., 206, 124, 10.1016/j.surfcoat.2011.06.062 Sui, 2020, Effect of specific energy on microstructure and properties of laser cladded TiN/Ti3AlN-Ti3Al composite coating, Opt Laser. Technol., 131, 10.1016/j.optlastec.2020.106428 Xu, 2016, Influence of second phases on fatigue crack growth behavior of nickel aluminum bronze, Int. J. Fatig., 82, 579, 10.1016/j.ijfatigue.2015.09.014 Zeng, 2021, Enhancing mechanical properties and corrosion resistance of nickel-aluminum bronze via hot rolling process, J. Mater. Sci. Technol., 61, 186, 10.1016/j.jmst.2020.05.024 Lv, 2020, Optimal microstructures on fatigue properties of friction stir processed NiAl bronze alloy and its resistant fatigue crack growth mechanism, Mater. Sci. Eng., 771, 10.1016/j.msea.2019.138577 Wu, 2017, Phase evolution and properties in laser surface alloying of FeCoCrAlCuNix high-entropy alloy on copper substrate, Surf. Coating. Technol., 315, 368, 10.1016/j.surfcoat.2017.02.068 Zhao, 2021, Microstructure evolution and properties of in-situ TiC reinforced titanium matrix composites coating by plasma transferred arc welding (PTAW), Surf. Coating. Technol., 424, 10.1016/j.surfcoat.2021.127637 Chen, 2021, Microstructural, electrochemical and wear-corrosion characterization of TC4-5Cu alloy fabricated by selective laser melting, J. Alloys Compd., 874, 10.1016/j.jallcom.2021.159953 Tang, 2020, Optimization of laser energy density and scanning strategy on the forming quality of 24CrNiMo low alloy steel manufactured by SLM, Mater. Char., 170, 10.1016/j.matchar.2020.110718 Culpan, 1978, Microstructural characterization of nickel aluminium bronze, J. Mater. Sci., 13, 1647, 10.1007/BF00548728 Cui, 2021, A comparison on microstructure features of 24CrNiMo low alloy steel prepared by selective laser melting and laser melting deposition, Vacuum, 191, 10.1016/j.vacuum.2021.110394 Cui, 2021, Additive manufacturing of 24CrNiMo low alloy steel by selective laser melting: influence of volumetric energy density on densification, microstructure and hardness, Mater. Sci. Eng., 809, 10.1016/j.msea.2021.140957 Shakil, 2020, Micromechanical characterization of wire-arc additive manufactured and cast nickel aluminum bronze: ambient and intermediate temperatures, Mater. Sci. Eng., 792, 10.1016/j.msea.2020.139773 Berretta, 2016, Polymer viscosity, Particle coalescence and mechanical performance in high-temperature laser sintering, J. Mater. Sci., 51, 4778, 10.1007/s10853-016-9761-6 Kwarciak, 1986, Phase transformation in martensite of Cu-12.4% Al, J. Mater. Sci., 21, 788, 10.1007/BF01117355 Tao, 2018, Effect of Fe and Ni contents on microstructure and wear resistance of aluminum bronze coatings on 316 stainless steel by laser cladding, Surf. Coating. Technol., 342, 76, 10.1016/j.surfcoat.2018.02.032 Balasubramanian, 2009, Application of response surface methodology to prediction of dilution in plasma transferred arc hardfacing of stainless steel on carbon steel, J. Iron Steel Res. Int., 16, 44, 10.1016/S1006-706X(09)60009-1 Shen, 2018, The influence of post-production heat treatment on the multi-directional properties of nickel-aluminum bronze alloy fabricated using wire-arc additive manufacturing process, Addit. Manuf., 23, 411 Cui, 2020, Effects of stress-relief heat treatment on the microstructure and fatigue property of a laser additive manufactured 12CrNi2 low alloy steel, Mater. Sci. Eng., 791, 10.1016/j.msea.2020.139738 Dharmendra, 2019, Microstructural evolution and mechanical behavior of nickel aluminum bronze Cu-9Al-4Fe-4Ni-1Mn fabricated through wire-arc additive manufacturing, Addit. Manuf., 30 Krauss, 2003, Solidification, segregation, and banding in carbon and alloy steels, Metall. Mater. Trans. B, 34, 781, 10.1007/s11663-003-0084-z Han, 2020, The formability and microstructure evolution of 24CrNiMo alloy steel fabricated by selective laser melting, Vacuum, 175, 10.1016/j.vacuum.2020.109297 Dharmendra, 2021, Characterization of κ-precipitates in wire-arc additive manufactured nickel aluminum bronze: a combined transmission Kikuchi diffraction and atom probe tomography study, Addit. Manuf., 46 Barr, 2021, Grain refinement in low SFE and particle-containing nickel aluminium bronze during severe plastic deformation at elevated temperatures, J. Mater. Sci. Technol., 82, 57, 10.1016/j.jmst.2020.12.016 Pan, 2021, Stress corrosion behavior of friction stir welding joint of 7N01 aluminum alloy, J. Mater. Res. Technol., 15, 1130, 10.1016/j.jmrt.2021.08.112 Fu, 2020, Mechanical behaviors of novel multiple principal elements CuAl10Fe5Ni5Mn1.2 wt% with micro-nano structures, J. Alloys Compd., 843, 10.1016/j.jallcom.2020.155993 Jiang, 2021, Additive manufacturing of novel ferritic stainless steel by selective laser melting: role of laser scanning speed on the formability, microstructure and properties, Opt Laser. Technol., 140, 10.1016/j.optlastec.2021.107055 Rizi, 2014, Microstructure evolution and microhardness of friction stir welded cast aluminum bronze, J. Mater. Process. Technol., 214, 1524, 10.1016/j.jmatprotec.2014.02.017 Park, 2003, Microstructural evolution and its effect on hall-petch relationship, J. Mater. Sci., 38, 4379, 10.1023/A:1026351619636 Cai, 2019, Probing the subsurface lattice rotation dynamics in bronze after sliding wear, Scripta Mater., 172, 6, 10.1016/j.scriptamat.2019.07.002 Li, 2021, Improving surface resistance to wear and corrosion of nickel-aluminum bronze by laser-clad TaC/Co-based alloy composite coatings, Surf. Coating. Technol., 405, 10.1016/j.surfcoat.2020.126592 Blau, 1984, Effect of heat treatment and electron beam surface melting on the friction and wear behavior of a Cu-12wt.% Al alloy, Wear, 94, 1, 10.1016/0043-1648(84)90163-7 Shao, 1988 Liu, 2020, Multi-directional forging and aging treatment effects on friction and wear characterization of aluminium-bronze alloy, Mater. Char., 167, 10.1016/j.matchar.2020.110511