Effect of internal woven roller shade and glazing on the energy and daylighting performances of an office building in the cold climate of Shillong

Bansal, 2014, Effect of construction materials on embodied energy and cost of buildings—a case study of residential houses in India up to 60m2 of plinth area, Energy Build, 69, 260, 10.1016/j.enbuild.2013.11.006 Tulsyan, 2013, Potential of energy savings through implementation of Energy Conservation Building Code in Jaipur city, India, Energy Build, 58, 123, 10.1016/j.enbuild.2012.11.015 Galasiu, 2006, Occupant preferences and satisfaction with the luminous environment and control systems in daylit offices: a literature review, Energy Build, 38, 728, 10.1016/j.enbuild.2006.03.001 Omar, 2002, On the effect of glazing and code compliance, Appl Energy, 71, 75, 10.1016/S0306-2619(01)00047-2 James, 2005, Smart glazing solutions to glare and solar gain: a “sick building” case study, Energy Build, 37, 1058, 10.1016/j.enbuild.2004.12.010 Aboulnaga, 2006, Towards green buildings: glass as a building element—the use and misuse in the gulf region, Renewable Energy, 31, 631, 10.1016/j.renene.2005.08.017 Poirazis, 2008, Energy simulations for glazed office buildings in Sweden, Energy Build, 40, 1161, 10.1016/j.enbuild.2007.10.011 Singh, 2011, Suitable glazing selection for glass-curtain walls in tropical climates of India, ISRN Renew Energy, 2011, 1, 10.5402/2011/484893 Grynning, 2014, Solar shading control strategies in cold climates-heating, cooling demand and daylight availability in office spaces, Sol Energy, 107, 182, 10.1016/j.solener.2014.06.007 Hee, 2015, The role of window glazing on daylighting and energy saving in buildings, Renew Sustain Energy Rev, 42, 323, 10.1016/j.rser.2014.09.020 Liu, 2015, Control strategies for intelligent glazed façade and their influence on energy and comfort performance of office buildings in Denmark, Appl Energy, 145, 43, 10.1016/j.apenergy.2015.02.003 Acosta, 2015, Analysis of daylight factors and energy saving allowed by windows under overcast sky conditions, Renewable Energy, 77, 194, 10.1016/j.renene.2014.12.017 Goia, 2013, Optimizing the configuration of a façade module for office buildings by means of integrated thermal and lighting simulations in a total energy perspective, Appl Energy, 108, 515, 10.1016/j.apenergy.2013.02.063 O’Brien, 2013, Manually-operated window shade patterns in office buildings: a critical review, Build Environ, 60, 319, 10.1016/j.buildenv.2012.10.003 da Silva, 2012, Influence of shading control patterns on the energy assessment of office spaces, Energy Build, 50, 35, 10.1016/j.enbuild.2012.03.019 Bellia, 2013, Effects of solar shading devices on energy requirements of standalone office buildings for Italian climates, Appl Therm Eng, 54, 190, 10.1016/j.applthermaleng.2013.01.039 Tzempelikos, 2013, Comparative control strategies for roller shades with respect to daylighting and energy performance, Build Environ, 67, 179, 10.1016/j.buildenv.2013.05.016 Hammad, 2010, The energy savings potential of using dynamic external louvers in an office building, Energy Build, 42, 1888, 10.1016/j.enbuild.2010.05.024 Kim, 2007, Analysis of design approaches to improve the comfort level of a small glazed-envelope building during summer, Sol Energy, 81, 39, 10.1016/j.solener.2006.06.018 Nielsen, 2011, Quantifying the potential of automated dynamic solar shading in office buildings through integrated simulations of energy and daylight, Sol Energy, 85, 757, 10.1016/j.solener.2011.01.010 Shen, 2012, Daylighting and energy analysis of private offices with automated interior roller shades, Sol Energy, 86, 681, 10.1016/j.solener.2011.11.016 Shen, 2013, Sensitivity analysis on daylighting and energy performance of perimeter offices with automated shading, Build Environ, 59, 303, 10.1016/j.buildenv.2012.08.028 Tzempelikos, 2007, The impact of shading design and control on building cooling and lighting demand, Sol Energy, 81, 369, 10.1016/j.solener.2006.06.015 Freewan, 2014, Impact of external shading devices on thermal and daylighting performance of offices in hot climate regions, Sol Energy, 102, 14, 10.1016/j.solener.2014.01.009 Sanati, 2013, The effect of window shading design on occupant use of blinds and electric lighting, Build Environ, 64, 67, 10.1016/j.buildenv.2013.02.013 Lee, 1998, Thermal and daylighting performance of an automated venetian blind and lighting system in a full-scale private office, Energy Build, 29, 47, 10.1016/S0378-7788(98)00035-8 Lee, 2006, The New York Times Headquarters daylighting mockup: monitored performance of the daylighting control system, Energy Build, 38, 914, 10.1016/j.enbuild.2006.03.019 Yao, 2014, An investigation into the impact of movable solar shades on energy, indoor thermal and visual comfort improvements, Build Environ, 71, 24, 10.1016/j.buildenv.2013.09.011 Lee, 2004, Low-cost networking for dynamic window systems, Energy Build, 36, 503, 10.1016/j.enbuild.2003.12.008 Yao, 2014, Determining the energy performance of manually controlled solar shades: a stochastic model based co-simulation analysis, Appl Energy, 127, 64, 10.1016/j.apenergy.2014.04.046 www.eere.energy.gov/buildings/energyplus; n.d. Fumo, 2010, Methodology to estimate building energy consumption using EnergyPlus Benchmark Models, Energy Build, 42, 2331, 10.1016/j.enbuild.2010.07.027 Bojić, 2012, A simulation appraisal of a switch of district to electric heating due to increased heat efficiency in an office building, Energy Build, 50, 324, 10.1016/j.enbuild.2012.04.004 Seo, 2011, Development of an optimal daylighting controller, Build Environ, 46, 1011, 10.1016/j.buildenv.2010.10.026 EnergyPlus Engineering Reference. The Reference to EnergyPlus Calculations. The US Department of Energy; 2013. Tian, 2014, Experimental and simulating examination of computer tools, Radlink and DOE2, for daylighting and energy simulation with venetian blinds, Appl Energy, 124, 130, 10.1016/j.apenergy.2014.03.002 Ramos, 2010, Analysis of daylight calculated using the EnergyPlus programme, Renew Sustain Energy Rev, 14, 1948, 10.1016/j.rser.2010.03.040 Perez, 1990, Modeling daylight availability and irradiance components from direct and global irradiance, Sol Energy, 44, 271, 10.1016/0038-092X(90)90055-H Nayak JA, Prajapati JK. Climate and buildings. In: Hand Book on energy conscious buildings. India: MNRE, GoI; 2006. http://en.wikipedia.org/wiki/Shillong; n.d. http://www.ishrae.in/; n.d. Energy Conservation Building Code: User Guide. Bureau of Energy Efficiency. New Delhi, India; 2009. http://www.nfrc.org/; n.d. ASHRAE. ASHRAE Handbook-Fundamentals; 2009. Kim, 2007, The impact of daylight fluctuation on a daylight dimming control system in a small office, Energy Build, 39, 935, 10.1016/j.enbuild.2006.10.009 Atif, 2003, Energy performance of daylight-linked automatic lighting control systems in large atrium spaces: report on two field-monitored case studies, Energy Build, 35, 441, 10.1016/S0378-7788(02)00142-1 Choi, 2000, Development of a daylight responsive dimming system and preliminary evaluation of system performance, Build Environ, 35, 663, 10.1016/S0360-1323(99)00055-4 Park, 2011, Performance of integrated systems of automated roller shade systems and daylight responsive dimming systems, Build Environ, 46, 747, 10.1016/j.buildenv.2010.10.007 Choi, 2005, The characteristics of photosensors and electronic dimming ballasts in daylight responsive dimming systems, Build Environ, 40, 39, 10.1016/j.buildenv.2004.07.014 Doulos, 2008, Quantifying energy savings in daylight responsive systems: the role of dimming electronic ballasts, Energy Build, 40, 36, 10.1016/j.enbuild.2007.01.019 Galasiu, 2004, Impact of window blinds on daylight-linked dimming and automatic on/off lighting controls, Sol Energy, 76, 523, 10.1016/j.solener.2003.12.007 Li, 2010, An analysis of energy-efficient light fittings and lighting controls, Appl Energy, 87, 558, 10.1016/j.apenergy.2009.07.002 Nabil, 2006, Useful daylight illuminances: a replacement for daylight factors, Energy Build, 38, 905, 10.1016/j.enbuild.2006.03.013 Piccolo, 2009, Effect of switchable glazing on discomfort glare from windows, Build Environ, 44, 1171, 10.1016/j.buildenv.2008.08.013 Hopkinson, 1972, Glare from daylighting in buildings, Appl Ergonom, 3, 206, 10.1016/0003-6870(72)90102-0 Crawley, 2001, EnergyPlus: creating a new-generation building energy simulation program, Energy Build, 33, 10.1016/S0378-7788(00)00114-6 Henninger, 2004, Analytical and comparative testing of EnergyPlus using IEA HVAC BESTEST E100–E200 test suite, Energy Build, 36, 855, 10.1016/j.enbuild.2004.01.025 Goral, 1984, Modeling the interaction of light between diffuse surfaces, Comput Graph, 18, 213, 10.1145/964965.808601 Athienitis, 2002 Chan, 2015, A systematic method for selecting roller shade properties for glare protection, Energy Build, 92, 81, 10.1016/j.enbuild.2015.01.057