Effect of heat treatment on AlSi10Mg alloy fabricated by selective laser melting: Microstructure evolution, mechanical properties and fracture mechanism

Read, 2015, Selective laser melting of AlSi10Mg alloy: process optimization and mechanical properties development, Mater. Des., 65, 417, 10.1016/j.matdes.2014.09.044

Li, 2011, Effects of yttrium and heat treatment on the microstructure and tensile properties of Al-7.5Si-0.5Mg alloy, Mater. Des., 32, 1617, 10.1016/j.matdes.2010.08.040

Tsai, 2009, Effect of trace La addition on the microstructures and mechanical properties of A356 (Al-7Si-0.35Mg) aluminum alloys, J. Alloy. Compd., 487, 157, 10.1016/j.jallcom.2009.07.183

McDonald, 2004, Eutectic nucleation in Al–Si alloys, Acta Mater., 52, 4273, 10.1016/j.actamat.2004.05.043

Li, 2015, A selective laser melting and solution heat treatment refined Al-12Si alloy with a controllable ultrafine eutectic microstructure and 25% tensile ductility, Acta Mater., 95, 74, 10.1016/j.actamat.2015.05.017

Lu, 2005, Combining Sr and Na additions in hypoeutectic Al-Si foundry alloys, Mater. Sci. Eng. A, 399, 244, 10.1016/j.msea.2005.03.091

Wang, 2013, Revisiting the role of peritectics in grain refinement of Al alloys, Acta Mater., 61, 630

Nogita, 2004, Eutectic modification of Al-Si alloys with rare earth metals, Mater. Trans., 45, 323, 10.2320/matertrans.45.323

Knuutinen, 2001, Porosity formation in aluminium alloy A356 modified with Ba, Ca, Y and Yb, J. Light Met., 1, 241, 10.1016/S1471-5317(02)00006-8

Trivedi, 2003, Dynamical evolution of microstructure in finely atomized droplets of Al-Si alloys, Acta Mater., 51, 289, 10.1016/S1359-6454(02)00226-4

Karakösea, 2009, Effect of solidification rate on the microstructure and microhardness of a melt-spun Al-8Si-1Sb alloy, J. Alloy. Compd., 479, 230, 10.1016/j.jallcom.2009.01.006

Chen, 2011, Structure and properties of nanostructured A357 alloy produced by melt spinning compared with direct chill ingot, J. Alloy. Compd., 509, 7473, 10.1016/j.jallcom.2011.04.082

Zhang, 2014, Effects of scan line spacing on pore characteristics and mechanical properties of porous Ti6Al4V implants fabricated by selective laser melting, Mater. Des., 63, 185, 10.1016/j.matdes.2014.05.021

Wei, 2015, Selective laser melting of stainless-steel/nano-hydroxyapatite composites for medical applications: microstructure, element distribution, crack and mechanical properties, J. Mater. Process. Technol., 222, 444, 10.1016/j.jmatprotec.2015.02.010

Wen, 2014, Effect of molten pool boundaries on the mechanical properties of selective laser melting parts, J. Mater. Process. Technol., 214, 2660, 10.1016/j.jmatprotec.2014.06.002

Fischer, 2003, Sintering of commercially pure titanium powder with a Nd:YAG laser source, Acta Mater., 51, 1651, 10.1016/S1359-6454(02)00567-0

Li, 2014, Parametric analysis of thermal behavior during selective laser melting additive manufacturing of aluminum alloy powder, Mater. Des., 63, 856, 10.1016/j.matdes.2014.07.006

Yuan, 2015, Particulate migration behavior and its mechanism during selective laser melting of TiC reinforced Al matrix nanocomposites, Mater. Des., 82, 46, 10.1016/j.matdes.2015.05.041

Weingarten, 2015, Formation and reduction of hydrogen porosity during selective laser melting of AlSi10Mg, J. Mater. Process. Technol., 221, 112, 10.1016/j.jmatprotec.2015.02.013

Qiu, 2015, Influence of processing conditions on strut structure and compressive properties of cellular lattice structures fabricated by selective laser melting, Mater. Sci. Eng. A, 628, 188, 10.1016/j.msea.2015.01.031

Kempen, 2015, Processing AlSi10Mg by selective laser melting: parameter optimisation and material characterization, Mater. Sci. Technol., 31, 917, 10.1179/1743284714Y.0000000702

Brandl, 2012, Additive manufactured AlSi10Mg samples using Selective Laser Melting (SLM): microstructure, high cycle fatigue, and fracture behavior, Mater. Des., 34, 159, 10.1016/j.matdes.2011.07.067

Aboulkhair, 2015, On the precipitation hardening of selective laser melted AlSi10Mg., Metall. Mater. Trans. A, 46A, 3337, 10.1007/s11661-015-2980-7

Tiryakioglu, 2006, The effect of solution treatment and artificial aging on the work hardening characteristics of a cast Al-7%Si-0.6%Mg alloy, Mater. Sci. Eng. A, 427, 154, 10.1016/j.msea.2006.04.011

Tiryakioglu, 2008, Si particle size and aspect ratio distributions in an Al-7%Si-0.6%Mg alloy during solution treatment, Mater. Sci. Eng. A, 473, 1, 10.1016/j.msea.2007.03.044

Ogris, 2002, On the silicon spheroidization in Al–Si alloys, J. Light Met., 2, 263, 10.1016/S1471-5317(03)00010-5

Zhang, 2002, Effect of a short solution treatment time on microstructure and mechanical properties of modified Al-7wt%Si-0.3wt%Mg alloy, J. Light Met., 2, 27, 10.1016/S1471-5317(02)00010-X

Ma, 2014, Influence of annealing on mechanical properties of Al-20Si processed by selective laser melting, Metal, 4, 28, 10.3390/met4010028

Bendijk, 1980, Characterization of Al-Si-alloys rapidly quenched from the melt, J. Mater. Sci., 15, 2803, 10.1007/BF00550549

Milligan, 2009, Nanocrystalline eutectic Al–Si alloy produced by cryomilling, Mater. Sci. Eng. A, 508, 43, 10.1016/j.msea.2008.12.017

Xie, 2015, Effects of nano-particles strengthening activating flux on the microstructures and mechanical properties of TIG welded AZ31 magnesium alloy joints, Mater. Des., 81, 31, 10.1016/j.matdes.2015.05.024

Izcaraa, 2014, Characterization and modeling of the influence of artificial aging on the microstructural evolution of age-hardenable AlSi10Mg (Cu) aluminum alloys, Mater. Sci. Eng. A, 610, 46, 10.1016/j.msea.2014.04.031

Yan, 2015, Microstructure and mechanical properties of aluminium alloy cellular lattice structures manufactured by direct metal laser sintering, Mater. Sci. Eng. A, 628, 238, 10.1016/j.msea.2015.01.063

Thijs, 2013, Fine-structured aluminium products with controllable texture by selective laser melting of pre-alloyed AlSi10Mg powder, Acta Mater., 61, 1809, 10.1016/j.actamat.2012.11.052

Louvis, 2011, Selective laser melting of aluminium components, J. Mater. Process. Technol., 211, 275, 10.1016/j.jmatprotec.2010.09.019

Glicksman, 2011

Prashanth, 2014, Microstructure and mechanical properties of Al-12Si produced by selective laser melting: effect of heat treatment, Mater. Sci. Eng. A, 590, 153, 10.1016/j.msea.2013.10.023

Basariya, 2014, Microstructural characteristics and mechanical properties of carbon nanotube reinforced aluminum alloy composites produced by ball milling, Mater. Des., 64, 542, 10.1016/j.matdes.2014.08.019

Dong, 2014, Effects of specimen and grain sizes on compression strength of annealed wrought copper alloy at room temperature, Mater. Des., 64, 400, 10.1016/j.matdes.2014.08.006

Zhu, 2014, Grain growth and microstructure evolution based mechanical property predicted by a modified Hall–Petch equation in hot worked Ni76Cr19AlTiCo alloy, Mater. Des., 55, 456, 10.1016/j.matdes.2013.10.023

Chen, 2013, The effect of interrupted aging on the yield strength and uniform elongation of precipitation-hardened Al alloys, Acta Mater., 61, 5877, 10.1016/j.actamat.2013.06.036

Buchbinder, 2011, High power selective laser melting (HP SLM) of aluminum parts, Phys. Procedia, 12, 271, 10.1016/j.phpro.2011.03.035

Mendoza-Duarte, 2015, Study of Al composites prepared by high-energy ball milling; effect of processing conditions, J. Alloy. Compd., 643, S172, 10.1016/j.jallcom.2015.01.018

Shehata, 2009, Fabrication of copper–alumina nanocomposites by mechano-chemical routes, J. Alloy. Compd., 476, 300, 10.1016/j.jallcom.2008.08.065

Jarfors, 2002, Deformation enhanced liquid phase sintering (DELPS): a study on the use of partial adiabatic melting during powder consolidation, J. Mater. Process. Technol., 127, 159, 10.1016/S0924-0136(02)00118-8

Hull, 1999

Hegde, 2008, Modification of eutectic silicon in Al-Si alloys, J. Mater. Sci., 43, 3009, 10.1007/s10853-008-2505-5

Manfredi, 2013, From powders to dense metal parts: characterization of a commercial AlSiMg alloy processed through direct metal laser sintering, Mater, 6, 856, 10.3390/ma6030856

Wang, 2003, Grain refinement of Al-Si alloy (A356) by melt thermal treatment, J. Mater. Process. Technol., 141, 29, 10.1016/S0924-0136(02)01007-5

Nafisi, 2006, Effects of electromagnetic stirring and superheat on the microstructural characteristics of Al-Si-Fe alloy, Mater. Sci. Eng. A, 432, 71, 10.1016/j.msea.2006.05.076

Calvo-Dahlborga, 2013, Superheat-dependent microstructure of molten Al–Si alloys of different compositions studied by small angle neutron scattering, J. Alloy. Compd., 550, 9, 10.1016/j.jallcom.2012.09.086

Brodova, 2002

Liu, 2011, Micro-nano scale ripples on metallic glass induced by laser pulse, J. Appl. Phys., 109

Flemings, 1974

Gremaud, 1996, The development of nucleation controlled microstructures during laser treatment of Al-Si alloys, Acta Mater., 44, 2669, 10.1016/1359-6454(95)00393-2

Pei, 2000, Functionally graded materials produced by laser cladding, Acta Mater., 48, 2617, 10.1016/S1359-6454(00)00065-3

Yeh, 1998, A reciprocating extrusion process for producing hypereutectic Al-20wt% Si wrought alloys, Mater. Sci. Eng. A, 252, 212, 10.1016/S0921-5093(98)00677-7