Effect of functionalized multi-walled carbon nanotubes on mechanical properties and durability of cement mortars

Shadmani, 2018, Durability and microstructure properties of SBR-modified concrete containing recycled asphalt pavement, Construct. Build. Mater., 185, 380, 10.1016/j.conbuildmat.2018.07.080

Sadrmomtazi, 2019, Effects of hauling time on self-consolidating mortars containing metakaolin and natural zeolite, Construct. Build. Mater., 221, 283, 10.1016/j.conbuildmat.2019.06.037

Saradar, 2020, Prediction of mechanical properties of lightweight basalt fiber reinforced concrete containing silica fume and fly ash: experimental and numerical assessment, J. Build. Eng., 32, 101732, 10.1016/j.jobe.2020.101732

Glasser, 2008, Durability of concrete—degradation phenomena involving detrimental chemical reactions, Cement Concr. Res., 38, 226, 10.1016/j.cemconres.2007.09.015

Cefis, 2017, Chemo-mechanical modelling of the external sulfate attack in concrete, Cement Concr. Res., 93, 57, 10.1016/j.cemconres.2016.12.003

Tian, 2000, Does gypsum formation during sulfate attack on concrete lead to expansion?, Cement Concr. Res., 30, 117, 10.1016/S0008-8846(99)00211-2

Santhanam, 2001, Sulfate attack research—whither now?, Cement Concr. Res., 31, 845, 10.1016/S0008-8846(01)00510-5

Yu, 2013, Mechanism of expansion of mortars immersed in sodium sulfate solutions, Cement Concr. Res., 43, 105, 10.1016/j.cemconres.2012.10.001

Li, 2015, Investigation on the mechanical properties of a cement-based material containing carbon nanotube under drying and freeze-thaw conditions, Materials, 8, 8780, 10.3390/ma8125491

Wang, 2015, Preparation and durability of cement-based composites doped with multi-walled carbon nanotubes, Nanosci. Nanotechnol. Lett., 7, 411, 10.1166/nnl.2015.1979

Hawreen, 2019, Mechanical characterization of concrete reinforced with different types of carbon nanotubes, Arabian J. Sci. Eng., 44, 8361, 10.1007/s13369-019-04096-y

Hawreen, 2019, Capillary absorption and oxygen permeability of concrete reinforced with carbon nanotubes, Adv. Civil Eng. Mater., 8, 307, 10.1520/ACEM20180156

Hawreen, 2018, On the mechanical and shrinkage behavior of cement mortars reinforced with carbon nanotubes, Construct. Build. Mater., 168, 459, 10.1016/j.conbuildmat.2018.02.146

Ahmed, 2018, Mechanical behavior and transport properties of cementitious composites reinforced with carbon nanotubes, J. Mater. Civ. Eng., 30, 10.1061/(ASCE)MT.1943-5533.0002470

Ahmed, 2019, Dispersion and reinforcement efficiency of carbon nanotubes in cementitious composites, Mag. Concr. Res., 71, 408, 10.1680/jmacr.17.00562

Silva, 2016, Influence of nano-SiO2 and nano-Al2O3 additions on the shear strength and the bending moment capacity of RC beams, Construct. Build. Mater., 123, 35, 10.1016/j.conbuildmat.2016.06.132

Ji, 2005, Preliminary study on the water permeability and microstructure of concrete incorporating nano-SiO2, Cement Concr. Res., 35, 1943, 10.1016/j.cemconres.2005.07.004

Du, 2014, Durability performances of concrete with nano-silica, Construct. Build. Mater., 73, 705, 10.1016/j.conbuildmat.2014.10.014

Ghasemzadeh Mosavinejad, 2018, Hoop stress-strain in fiber-reinforced cementitious composite thin-walled cylindrical shells, J. Mater. Civ. Eng., 30, 10.1061/(ASCE)MT.1943-5533.0002428

Tahmouresi, 2021, Mechanical strength and microstructure of engineered cementitious composites: a new configuration for direct tensile strength, experimental and numerical analysis, Construct. Build. Mater., 269, 121361, 10.1016/j.conbuildmat.2020.121361

Cao, 1997, The effect of cement composition and pH of environment on sulfate resistance of Portland cements and blended cements, Cement Concr. Compos., 19, 161, 10.1016/S0958-9465(97)00011-5

Hossack, 2015, The effect of temperature on the rate of sulfate attack of Portland cement blended mortars in Na2SO4 solution, Cement Concr. Res., 73, 136, 10.1016/j.cemconres.2015.02.024

Lee, 2005, Effect of solution concentrations and replacement levels of metakaolin on the resistance of mortars exposed to magnesium sulfate solutions, Cement Concr. Res., 35, 1314, 10.1016/j.cemconres.2004.10.035

Li, 2019, Cementing efficiencies and synergistic roles of silica fume and nano-silica in sulphate and chloride resistance of concrete, Construct. Build. Mater., 223, 965, 10.1016/j.conbuildmat.2019.07.241

Fan, 2016, The effects of nano-calcined kaolinite clay on cement mortar exposed to acid deposits, Construct. Build. Mater., 102, 486, 10.1016/j.conbuildmat.2015.11.016

Langaroudi, 2018, Effect of nano-clay on workability, mechanical, and durability properties of self-consolidating concrete containing mineral admixtures, Construct. Build. Mater., 191, 619, 10.1016/j.conbuildmat.2018.10.044

Diab, 2019, Effect of nanomaterials additives on performance of concrete resistance against magnesium sulfate and acids, Construct. Build. Mater., 210, 210, 10.1016/j.conbuildmat.2019.03.099

Khotbehsara, 2018, Effect of SnO2, ZrO2, and CaCO3 nanoparticles on water transport and durability properties of self-compacting mortar containing fly ash: experimental observations and ANFIS predictions, Construct. Build. Mater., 158, 823, 10.1016/j.conbuildmat.2017.10.067

Iijima, 1991, Helical microtubules of graphitic carbon, Nature, 354, 56, 10.1038/354056a0

Salvetat, 1999, Mechanical properties of carbon nanotubes, Appl. Phys. A, 69, 255, 10.1007/s003390050999

Konsta-Gdoutos, 2010, Multi-scale mechanical and fracture characteristics and early-age strain capacity of high performance carbon nanotube/cement nanocomposites, Cement Concr. Compos., 32, 110, 10.1016/j.cemconcomp.2009.10.007

Konsta-Gdoutos, 2010, Highly dispersed carbon nanotube reinforced cement based materials, Cement Concr. Res., 40, 1052, 10.1016/j.cemconres.2010.02.015

Carriço, 2018, Durability of multi-walled carbon nanotube reinforced concrete, Construct. Build. Mater., 164, 121, 10.1016/j.conbuildmat.2017.12.221

Lee, 2018, Durability performance of CNT and nanosilica admixed cement mortar, Construct. Build. Mater., 159, 463, 10.1016/j.conbuildmat.2017.11.003

Xu, 2015, Mechanical properties and microstructure of multi-walled carbon nanotube-reinforced cement paste, Construct. Build. Mater., 76, 16, 10.1016/j.conbuildmat.2014.11.049

Hu, 2014, Fracture toughness enhancement of cement paste with multi-walled carbon nanotubes, Construct. Build. Mater., 70, 332, 10.1016/j.conbuildmat.2014.07.077

Al-Rub, 2012, On the aspect ratio effect of multi-walled carbon nanotube reinforcements on the mechanical properties of cementitious nanocomposites, Construct. Build. Mater., 35, 647, 10.1016/j.conbuildmat.2012.04.086

Kim, 2014, Enhanced effect of carbon nanotube on mechanical and electrical properties of cement composites by incorporation of silica fume, Compos. Struct., 107, 60, 10.1016/j.compstruct.2013.07.042

Kim, 2017, Influences of CNT dispersion and pore characteristics on the electrical performance of cementitious composites, Compos. Struct., 164, 32, 10.1016/j.compstruct.2016.12.049

Han, 2015, Electrostatic self-assembled carbon nanotube/nano carbon black composite fillers reinforced cement-based materials with multifunctionality, Compos. Appl. Sci. Manuf., 79, 103, 10.1016/j.compositesa.2015.09.016

Isfahani, 2016, Dispersion of multi-walled carbon nanotubes and its effects on the properties of cement composites, Cement Concr. Compos., 74, 154, 10.1016/j.cemconcomp.2016.09.007

Musso, 2009, Influence of carbon nanotubes structure on the mechanical behavior of cement composites, Compos. Sci. Technol., 69, 1985, 10.1016/j.compscitech.2009.05.002

Wang, 2013, Effect of highly dispersed carbon nanotubes on the flexural toughness of cement-based composites, Construct. Build. Mater., 46, 8, 10.1016/j.conbuildmat.2013.04.014

Munkhbayar, 2013, Influence of dry and wet ball milling on dispersion characteristics of the multi-walled carbon nanotubes in aqueous solution with and without surfactant, Powder Technol., 234, 132, 10.1016/j.powtec.2012.09.045

Sindu, 2017, Properties of carbon nanotube reinforced cement composite synthesized using different types of surfactants, Construct. Build. Mater., 155, 389, 10.1016/j.conbuildmat.2017.08.059

Chen, 2014, Predicting the influence of ultrasonication energy on the reinforcing efficiency of carbon nanotubes, Carbon, 77, 1, 10.1016/j.carbon.2014.04.023

Sobolkina, 2012, Dispersion of carbon nanotubes and its influence on the mechanical properties of the cement matrix, Cement Concr. Compos., 34, 1104, 10.1016/j.cemconcomp.2012.07.008

Parveen, 2015, Microstructure and mechanical properties of carbon nanotube reinforced cementitious composites developed using a novel dispersion technique, Cement Concr. Res., 73, 215, 10.1016/j.cemconres.2015.03.006

Mei, 2010, Gels of carbon nanotubes and a nonionic surfactant prepared by mechanical grinding, Carbon, 48, 293, 10.1016/j.carbon.2009.09.032

A. D'Alessandro, M. Tiecco, A. Meoni, F. Ubertini, Improved strain sensing properties of cement-based sensors through enhanced carbon nanotube dispersion, Cement Concr. Compos. 115 103842.

Silvestro, 2020, Effect of carbon nanotubes on compressive, flexural and tensile strengths of Portland cement-based materials: a systematic literature review, Construct. Build. Mater., 264, 120237, 10.1016/j.conbuildmat.2020.120237

Zhan, 2020, In situ-grown carbon nanotubes enhanced cement-based materials with multifunctionality, Cement Concr. Compos., 108, 103518, 10.1016/j.cemconcomp.2020.103518

Shao, 2017, Influence of dispersants on the properties of CNTs reinforced cement-based materials, Construct. Build. Mater., 131, 186, 10.1016/j.conbuildmat.2016.11.053

Collins, 2012, The influences of admixtures on the dispersion, workability, and strength of carbon nanotube–OPC paste mixtures, Cement Concr. Compos., 34, 201, 10.1016/j.cemconcomp.2011.09.013

Konsta-Gdoutos, 2017, Fresh and mechanical properties, and strain sensing of nanomodified cement mortars: the effects of MWCNT aspect ratio, density and functionalization, Cement Concr. Compos., 82, 137, 10.1016/j.cemconcomp.2017.05.004

Zou, 2015, Effect of ultrasonication energy on engineering properties of carbon nanotube reinforced cement pastes, Carbon, 85, 212, 10.1016/j.carbon.2014.12.094

Metaxa, 2012, Highly concentrated carbon nanotube admixture for nano-fiber reinforced cementitious materials, Cement Concr. Compos., 34, 612, 10.1016/j.cemconcomp.2012.01.006

Bogas, 2019, Selection of dispersants for stabilization of unfunctionalized carbon nanotubes in high pH aqueous suspensions: application to cementitious matrices, Appl. Surf. Sci., 463, 169, 10.1016/j.apsusc.2018.08.196

Sun, 2016, Mechanism of cement/carbon nanotube composites with enhanced mechanical properties achieved by interfacial strengthening, Construct. Build. Mater., 115, 87, 10.1016/j.conbuildmat.2016.04.034

Manzur, 2015, Optimum mix ratio for carbon nanotubes in cement mortar, KSCE Journal of Civil Engineering, 19, 1405, 10.1007/s12205-014-0721-x

Mohsen, 2017, Optimum carbon nanotubes' content for improving flexural and compressive strength of cement paste, Construct. Build. Mater., 150, 395, 10.1016/j.conbuildmat.2017.06.020

Shah, 2013, Improvement in electrical and thermal behavior of polystyrene/multiwalled carbon nanotubes nanocomposites, Measurement, 46, 1541, 10.1016/j.measurement.2012.11.035

Cwirzen, 2008, Surface decoration of carbon nanotubes and mechanical properties of cement/carbon nanotube composites, Adv. Cement Res., 20, 65, 10.1680/adcr.2008.20.2.65

Li, 2005, Mechanical behavior and microstructure of cement composites incorporating surface-treated multi-walled carbon nanotubes, Carbon, 43, 1239, 10.1016/j.carbon.2004.12.017

Stynoski, 2015, Effects of silica additives on fracture properties of carbon nanotube and carbon fiber reinforced Portland cement mortar, Cement Concr. Compos., 55, 232, 10.1016/j.cemconcomp.2014.08.005

Pierard, 2004, Ball milling effect on the structure of single-wall carbon nanotubes, Carbon, 42, 1691, 10.1016/j.carbon.2004.02.031

Kim, 2002, Effect of ball milling on morphology of cup-stacked carbon nanotubes, Chem. Phys. Lett., 355, 279, 10.1016/S0009-2614(02)00248-8

Pierard, 2001, Production of short carbon nanotubes with open tips by ball milling, Chem. Phys. Lett., 335, 1, 10.1016/S0009-2614(01)00004-5

Tamimi, 2016, Performance of cementitious materials produced by incorporating surface treated multiwall carbon nanotubes and silica fume, Construct. Build. Mater., 114, 934, 10.1016/j.conbuildmat.2016.03.216

Alafogianni, 2019, Effect of CNT addition and dispersive agents on the transport properties and microstructure of cement mortars, Construct. Build. Mater., 197, 251, 10.1016/j.conbuildmat.2018.11.169

Brown, 2018, Influence of carbon nanofiber clustering in cement pastes exposed to sulfate attack, Construct. Build. Mater., 166, 181, 10.1016/j.conbuildmat.2018.01.108

Rocha, 2019, The influence of carbon nanotubes on the fracture energy, flexural and tensile behavior of cement based composites, Construct. Build. Mater., 209, 1, 10.1016/j.conbuildmat.2019.03.003

Jeevanagoudar, 2017, Improved mechanical properties and piezoresistive sensitivity evaluation of MWCNTs reinforced cement mortars, Construct. Build. Mater., 144, 188, 10.1016/j.conbuildmat.2017.03.139

Manzur, 2016, Potential of carbon nanotube reinforced cement composites as concrete repair material, J. Nanomater., 2016, 10.1155/2016/1421959

Danoglidis, 2016, Strength, energy absorption capability and self-sensing properties of multifunctional carbon nanotube reinforced mortars, Construct. Build. Mater., 120, 265, 10.1016/j.conbuildmat.2016.05.049

Sedaghatdoost, 2018, Mechanical properties of Portland cement mortar containing multi-walled carbon nanotubes at elevated temperatures, Construct. Build. Mater., 176, 482, 10.1016/j.conbuildmat.2018.05.095

Kordkheili, 2012, Some of the physical and mechanical properties of cement composites manufactured from carbon nanotubes and bagasse fiber, Mater. Des., 33, 395, 10.1016/j.matdes.2011.04.027

Leonavičius, 2018, The effect of multi-walled carbon nanotubes on the rheological properties and hydration process of cement pastes, Construct. Build. Mater., 189, 947, 10.1016/j.conbuildmat.2018.09.082

Han, 2013, Transport properties of carbon-nanotube/cement composites, J. Mater. Eng. Perform., 22, 184, 10.1007/s11665-012-0228-x

Hawreen, 2018, Influence of carbon nanotubes on steel–concrete bond strength, Mater. Struct., 51, 155, 10.1617/s11527-018-1279-8

Hawreen, 2019, Creep, shrinkage and mechanical properties of concrete reinforced with different types of carbon nanotubes, Construct. Build. Mater., 198, 70, 10.1016/j.conbuildmat.2018.11.253

Han, 2012, Fabrication of piezoresistive CNT/CNF cementitious composites with superplasticizer as dispersant, J. Mater. Civ. Eng., 24, 658, 10.1061/(ASCE)MT.1943-5533.0000435

2000, Standard test method for compressive strength of hydraulic cement mortars”, Annu. Book ASTM Stand., 4.01, 84

2011

ASTM C348, “Standard Test Method for Flexural Strength of Hydraulic Cement.

Wilson, 1999, British Standard and RILEM water absorption tests: a critical evaluation, Mater. Struct., 32, 571, 10.1007/BF02480491

1985, vol. 225

Ma, 2006, Functionalization of carbon nanotubes using a silane coupling agent, Carbon, 44, 3232, 10.1016/j.carbon.2006.06.032

Ramanathan, 2005, Amino-functionalized carbon nanotubes for binding to polymers and biological systems, Chem. Mater., 17, 1290, 10.1021/cm048357f

Zhang, 2003, Effect of chemical oxidation on the structure of single-walled carbon nanotubes, J. Phys. Chem. B, 107, 3712, 10.1021/jp027500u

Kim, 2005, Raman and IR spectroscopy of chemically processed single-walled carbon nanotubes, J. Am. Chem. Soc., 127, 15437, 10.1021/ja052951o

Avilés, 2009, Evaluation of mild acid oxidation treatments for MWCNT functionalization, Carbon, 47, 2970, 10.1016/j.carbon.2009.06.044

Stobinski, 2010, Multiwall carbon nanotubes purification and oxidation by nitric acid studied by the FTIR and electron spectroscopy methods, J. Alloys Compd., 501, 77, 10.1016/j.jallcom.2010.04.032

Kitamura, 2011, The method for surface functionalization of single-walled carbon nanotubes with fuming nitric acid, Carbon, 49, 3851, 10.1016/j.carbon.2011.05.020

Jiang, 2007, The preparation of stable metal nanoparticles on carbon nanotubes whose surfaces were modified during production, Carbon, 45, 655, 10.1016/j.carbon.2006.10.006

Fatin, 2014, Surface functionalization of multiwalled carbon nanotube for biosensor device application, 377

Ayyappan, 1997, Nanoparticles of Ag, Au, Pd, and Cu produced by alcohol reduction of the salts, J. Mater. Res., 12, 398, 10.1557/JMR.1997.0057