Effect of feed rate on surface roughness in abrasive waterjet cutting applications

Kulekci, 2002, Processes and apparatus developments in industrial waterjet applications, Int. J. Mach. Tool Manuf., 42, 1297, 10.1016/S0890-6955(02)00069-X M. Hashish, Prediction models for AWJ machining operation, in: Proceedings of the Seventh American Waterjet Conference, USA, 1993, pp. 205–209. Tönshoff, 1996, High pressure water peening—a new mechanical surface strengthening process, Ann. CIRP, 46, 113, 10.1016/S0007-8506(07)60787-2 S. Kalpakjian, Manufacturing Engineering and Technology, Addison Wesley Publishing Company, USA, 1995. C. Öjmerts, N. Amini, Discrete approach to the abrasive waterjet milling process, in: Proceedings of the 12th International Conference on Jet Cutting Technology, Rounen France, 1994, pp. 425–434. Doyle, 1989, Thermomechanical effects during solid particle erosion, Wear, 131, 105 Hashish, 1988, Visualisation of surfaces machined with abrasive—waterjet cutting process, Exp. Mech., 28, 159, 10.1007/BF02317567 Hashish, 1991, Characteristics of surfaces machined with abrasive—waterjet, J. Eng. Mater.Technol., 113, 354, 10.1115/1.2903418 Hashish, 1989, Pressure effects in abrasive waterjet machining, J. Eng. Mater. Technol., 111, 221, 10.1115/1.3226458 H. Blickwedel, N.S. Guo, H. Haferkamp, H. Louis, Prediction of abrasive jet cutting efficiency and quality, in: Proceedings of the 10th International Symposium in Jet Cutting Technology, The Netherlands, 1990, pp. 163-180. Simpson, 1990, Abrasive particle study in high pressure waterjet cutting, Int. J. Water Jet Technol., 1, 17 C. Öjmerts, Abrasive waterjet machining, Licentiate Thesis, Chalmers University of Technology, Sweden, 1994. C. Öjmerts, Abrasive waterjet milling—an experimental investigation, in: Proceedings of the Seventh American Waterjet Conference, Seatle, USA, 1993, pp. 771–791. C. Öjmerts, Analysis of surfaces produced by abrasive waterjet milling techniques, in: Proceedings of the 13th International Conference on Jetting Technology, Sardinia, Italy, 1996, pp. 753–768. P.J. Singh, W.L. Chen, J. Munoz, Comprehensive evalution of abrasive waterjet cut surface quality, in: Proceedings of the Sixth American Waterjet Conference, USA, 1991, pp. 139–156. F. Mendi, M.K. Külekci, İmalatta Su Jeti Uygulamalarının Deǧerlendirilmesi, Pamukkale Üniversitesi Mühendislik Bilimleri Dergisi, ISSN 1300-7009, 5 (2–3) (1999) 1067–1075. M. Nanduri, T. Kim, et al., Wear patterns in abrasive waterjet nozzles, in: Proceedings of the 13th International Conference on Jetting Technology, Sardinia, Italy, 1996, pp. 27–43. T. Raissi, et al., Mixing tube geometry influence on abrasive waterjet flow, in: Proceedings of the 13th International Conference on Jetting Technology, Sardinia, Italy, 1996, pp. 247–267. N.S. Guo, H. Louis, G. Meher, Surface structure and kerf geometry in AWJ: formation and optimisation, in: Proceedings of the Seventh American Waterjet Conference, USA, 1993, pp. 1–26. Hashish, 1991, Optimisation factors in abrasive waterjet machining, J. Eng. Ind., 113, 29, 10.1115/1.2899619 Modern Metal Cutting—A Practical Handbook, Sandvik Coamant Co., Sweden, 1997. E.M. Trent, Metal Cutting, Tanner Ltd., UK, 1984.