Effect of dealcoholation of support in MgCl2-supported Ziegler–Natta catalysts on catalyst activity and polypropylene powder morphology

Ebrahim Jalali Dil1, Saeed Pourmahdian1, Mohammad Vatankhah1, Faramarz Afshar Taromi1
1Polymer Engineering Department, Amirkabir University of Technology, Tehran, Iran

Tóm tắt

Spherical support was produced using melt quenching method. Scanning electron microscopy (SEM) images showed that support particles have a rough surface morphology with small pore sizes. The size of primary particles determined to be about 50 nm. Produced particles were dealcoholated using hot nitrogen flow. In this study, the dealcoholation apparatus was similar to a fluidized bed reactor. It consists of three main zones: heating zone, bed zone, and expansion zone. This apparatus is capable to dealcoholate and elutriate support particles at the same time. Results showed a significant increase in specific pore volume and surface area of support particles during the dealcoholation. According to the obtained results, two mechanisms were proposed to explain effect of the dealcoholation on the morphology of support particles. Three dealcoholated samples of different alcohol contents were used in the catalyst preparation. Results showed that by decrease in alcohol content of support particles, specific surface area, and pore volume of catalysts increased. Moreover, titanium content of final catalysts increased slightly. Polymerization of propylene was carried out using obtained catalysts in slurry phase. An increase in catalyst activity and enhancement of polypropylene powder morphology were observed as the alcohol content of support particles decreased.

Từ khóa


Tài liệu tham khảo

Moore EP (1998) The rebirth of polypropylene: supported catalysts. Hanser, Munich

Galli P, Vecellio G (2001) Technology, driving force behind innovation and growth of polyolefins. Prog Polym Sci 26:1287–1336

Monji M, Pourmahdian S, Vatankhah M, Afshar Taromi F (2009) Synthesis of highly improved Ziegler–Natta catalyst. J Appl Polym Sci 112:3663–3668

Ling Y, Chen W, Xie L, Liu Y, Zheng G (2008) Preparation of novel microspherical MgCl2-based titanium catalyst for propylene polymerization. J Appl Polym Sci 110:3448–3454

Wang L, Yu HJ, Ma ZL, Ye ZY, Jiang S, Feng L, Gu X (2006) Preparation of novel MgCl2-adduct supported spherical Ziegler–Natta catalyst for α-olefin Polymerization. J Appl Polym Sci 99:945–948

Ye ZY, Wang L, Feng L, Gu X, Chen H, Zhang P, Pan J, Jiang S, Feng L (2002) Novel spherical Ziegler–Natta catalyst for polymerization and copolymerization. I. Spherical MgCl2 support. J Polym Sci A 40:3112–3119

Forte MC, Coutinho MFB (1996) Highly active magnesium chloride supported Ziegler–Natta catalysts with controlled morphology. Eur Polym J 32:223–231

Sozzani P, Bracco S, Comotti A, Simonutti R, Camurati I (2003) Stoichiometric compounds of magnesium dichloride with ethanol for the supported Ziegler–Natta catalysis: first recognition and multidimensional MAS NMR Study. J Am Chem Soc 125:12881–12893

Ferraris M, Rosati F, Parodi S, Giannetti E, Motroni G, Albizzati E (1983) Catalyst components and catalysts for the polymerization of alpha-olefins. US Patent 4,399,054

Govoni G, Ciarrocchi A, Sacchetti M (1993) Crystalline olefin polymers and copolymers in the form of spherical particles at high porosity. US Patent 5,231,119

Jamjah R, Zohuri GH, Vaezi J, Ahmadjo S, Nekomanesh M, Pouryari M (2006) Morphological study of spherical MgCl2·nEtOH supported TiCl4 Ziegler–Natta catalyst for polymerization of ethylene. J Appl Polym Sci 101:3829–3834

Xu R, Liu D, Wang S, Wang N, Mao B (2007) Preparation of spherical MgCl2-supported bis(phenoxyimine) zirconium complex for ethylene polymerization. J Mol Catal A 263:86–92

Guan Z, Zheng Y, Jiao S (2002) Spherical MgCl2-supported MAO pre-catalysts: preparation, characterization and activity in ethylene polymerization. J Mol Catal A 188:123–131

Evangelisti D, Collina G (2006) Magnesium dichloride-ethanol adducts and catalyst components obtained therefrom. US Patent 7,060,763

Evangelisti D, Collina G, Fusco O, Sacchetti M (2006) Magnesium dichloride-ethanol adduct and catalyst components obtained therefrom. US Patent 7,087,688

Sacchetti M, Collina G, Ciarrocchi A (1990) Components and catalysts for the polymerization of olefins. Eur Patent 0,395,083

Zheng X, Loos J (2006) Morphology evolution in the early stages of olefin polymerization. Macromol Symp 236:249–258

Govoni G, Sacchetti M, Ciarrocchi A (1993) Crystalline propylene polymers and copolymers in the form of spherical particles at high porosity. US Patent 5,236,962

Chien JCW, Wu JC, Kuo CI (1982) Magnesium chloride supported high mileage catalysts for olefin polymerization. I. Chemical composition and oxidation states of titanium. J Polym Sci A 20:2019–2032