Effect of cooling media on bead geometry, microstructure, and mechanical properties of wire arc additive manufactured IN718 alloy

Yusuf SM, Cutler S, Gao N (2019) Review: the impact of metal additive manufacturing on the aerospace industry. Metals 9(12):1286. https://doi.org/10.3390/met9121286 Lin Z, Song K, Yu X (2021) A review on wire and arc additive manufacturing of titanium alloy. J Manuf Process 70:24–45 Bidare P, Jiménez A, Hassanin H et al (2022) Porosity, cracks, and mechanical properties of additively manufactured tooling alloys: a review. Adv Manuf 10:175–204 Dong Y, Milentis J, Pramanik A (2018) Additive manufacturing of mechanical testing samples based on virgin poly(lactic acid) (PLA) and PLA/wood fibre composites. Adv Manuf 6:71–82 Read N, Wang W, Essa K et al (2015) Selective laser melting of AlSi10Mg alloy: process optimisation and mechanical properties development. Mater Des 65:417–424 Kumar P, Sharma SK, Singh RKR (2022) Recent trends and future outlooks in manufacturing methods and applications of FGM: a comprehensive review. Mater Manuf Process 38(9):1033–1067 Zykova A, Chumaevskii A, Vorontsov A et al (2022) Microstructural evolution of AA5154 layers intermixed with Mo powder during electron beam wire-feed additive manufacturing (EBAM). Metals 12(1):109. https://doi.org/10.3390/met12010109 Le VT, Doan QT, Mai DS et al (2022) Prediction and optimization of processing parameters in wire and arc-based additively manufacturing of 316L stainless steel. J Braz Soc Mech Sci Eng 44:1–16 Baffa F, Venturini G, Campatelli G et al (2022) Effect of stepover and torch tilting angle on a repair process using WAAM. Adv Manuf 10:541–555 Wu B, Pan Z, Ding D et al (2018) A review of the wire arc additive manufacturing of metals: properties, defects and quality improvement. J Manuf Process 35:127–139 Singh S, Sharma SK, Rathod DW (2020) A review on process planning strategies and challenges of WAAM. Mater Today Proc 47:6564–6575 Zhu S (2013) Robotic GMAW forming remanufacturing technology. Adv Manuf 1:87–90 Ainapurapu SB, Anantha V, Devulapalli R (2022) Microstructure and mechanical properties of the bimetallic wire arc additively manufactured structure (BAMS) of SS304L and SS308L fabricated by hybrid manufacturing process. Trans Indian Inst Met 76:419–426 Chakraborty D, Tirumala T, Chitral S et al (2022) The state of the art for wire arc additive manufacturing process of titanium alloys for aerospace applications. J Mater Eng Perform 31:6149–6182 Duan C, Zhao M, Luo X (2020) Thermal behavior and densification mechanism during selective laser melting additive manufacturing of metal powder. Steel Res Int 91(8):2000073. https://doi.org/10.1002/srin.202000073 Park SC, Bang HS, Seong WJ (2020) Effects of material properties on angular distortion in wire arc additive manufacturing: experimental and computational analyses. Materials 13(6):1399. https://doi.org/10.3390/ma13061399 Xu X, Ding J, Ganguly S et al (2018) Oxide accumulation effects on wire + arc layer-by-layer additive manufacture process. J Mater Process Technol 252:739–750 Cunningham CR, Wang J, Dhokia V et al (2019) Characterisation of austenitic 316LSi stainless steel produced by wire arc additive manufacturing with interlayer cooling. In: proceedings of the 30th annual international solid freeform fabrication symposium, 2019, pp 426–439 Wang K, Liu Y, Sun Z et al (2020) Microstructural evolution and mechanical properties of Inconel 718 superalloy thin wall fabricated by pulsed plasma arc additive manufacturing. J Alloys Compd 819:152936. https://doi.org/10.1016/j.jallcom.2019.152936 Vázquez L, Rodríguez N, Rodríguez I et al (2020) Influence of interpass cooling conditions on microstructure and tensile properties of Ti-6Al-4V parts manufactured by WAAM. Weld World 64:1377–1388 Cunningham CR, Dhokia V, Shokrani A et al (2021) Effects of in-process LN2 cooling on the microstructure and mechanical properties of type 316L stainless steel produced by wire arc directed energy deposition. Mater Lett 282:128707. https://doi.org/10.1016/j.matlet.2020.128707 Reisgen U, Sharma R, Mann S et al (2020) Increasing the manufacturing efficiency of WAAM by advanced cooling strategies. Weld World 64:1409–1416 Luo J, You G, Lu D et al (2021) Effect of modified water-bath method on microstructure and mechanical properties of wire arc additive manufactured low-carbon low-alloy steel. Steel Res Int 92(4):20000523. https://doi.org/10.1002/srin.202000523 da Silva LJ, Souza DM, de Araújo DB et al (2020) Concept and validation of an active cooling technique to mitigate heat accumulation in WAAM. Int J Adv Manuf Technol 107:2513–2523 Nagamatsu H, Sasahara H (2022) Improvement of cooling effect and dimensional accuracy of wire and arc additive manufactured magnesium alloy by active-cooling-based contacting copper blocks. J Manuf Mater Process 6(2):27. https://doi.org/10.3390/jmmp6020027 Jang J, Van D, Lee SH (2022) Precipitation kinetics of secondary phases induced by heat accumulation in the deposit of Inconel 718. Addit Manuf 55:102831. https://doi.org/10.1016/j.addma.2022.102831 Zhang T, Li H, Gong H et al (2022) Study on location-related thermal cycles and microstructure variation of additively manufactured Inconel 718. J Mater Res Technol 18:3056–3072 Donghyun V, Dinda GP, Jaewoong P et al (2020) Enhancing hardness of Inconel 718 deposits using the aging effects of cold metal transfer-based additive manufacturing. Mater Sci Eng A 776:139005. https://doi.org/10.1016/j.msea.2020.139005 Kindermann RM, Roy MJ, Morana R et al (2020) Process response of Inconel 718 to wire + arc additive manufacturing with cold metal transfer. Mater Des 195:109031. https://doi.org/10.1016/j.matdes.2020.109031 Pal K, Pal SK (2011) Effect of pulse parameters on weld quality in pulsed gas metal arc welding: a review. J Mater Eng Perform 20:918–931 Kumar P, Singh RKR, Sharma SK (2022) Effect of welding parameters on bead characteristics and mechanical properties of wire and arc additive manufactured Inconel 718. Proc Inst Mech Eng Part C J Mech Eng Sci 237(7):1668–1691 Zhang W, Kim CH, DebRoy T (2004) Heat and fluid flow in complex joints during gas metal arc welding—part II: application to fillet welding of mild steel. J Appl Phys 95:5220–5229 Wells ME, Lukens WE (1986) Effect of forced gas cooling on GTA weld pools. Weld J 65:314–320 Mukherjee T, Manvatkar V, De A et al (2017) Dimensionless numbers in additive manufacturing. J Appl Phys 121:064904. https://doi.org/10.1063/1.4976006 Magudeeswaran G, Nair SR, Sundar L et al (2014) Optimization of process parameters of the activated tungsten inert gas welding for aspect ratio of UNS S32205 duplex stainless steel welds. Def Technol 10:251–260 Zhang W, Kim CH, DebRoy T (2004) Heat and fluid flow in complex joints during gas metal arc welding—part I: numerical model of fillet welding. J Appl Phys 95:5210–5219 Sharma SK, Maheshwari S, Singh RKR (2019) Effect of heat-input and cooling-time on bead characteristics in SAW. Mater Manuf Process 34:208–215 Sharma SK, Maheshwari S (2017) Arc characterization study for submerged arc welding of HSLA (API X80) steel. J Mech Sci Technol 31:1383–1390 Sharma SK, Rathod DW, Payal H et al (2019) Chap. 5: investigation of bead geometry and shape parameters. In: Sharma DVS, Dixit DUS, Sørby DK (eds) Manufacturing engineering. Springer Debroy T, David SA (1995) Physical processes in fusion welding. Rev Mod Phys 67:85–112 Azeem MA, Arif ZU, Shah M et al (2020) Influence of liquid nitrogen on residual circumferential distortion, weld penetration and delta-ferrite distribution in clamped tungsten inert gas welded butt joint of 316 stainless steel. SN Appl Sci 2:1640. https://doi.org/10.1007/s42452-020-03446-y Kim IS, Basu A (1998) A mathematical model of heat transfer and fluid flow in the gas metal arc welding process. J Mater Process Technol 300:17–24 Sharma SK, Rathod DW, Payal H et al (2020) Investigation of weld bead shape parameters in relation to heat input during submerged arc welding. In: Sharma V, Dixit U, Sørby K et al (eds) Manufacturing engineering. Lecture Notes on Multidisciplinary Industrial Engineering. Springer, Singapore, pp 329–340 Elsen M, van Al-bender F, Kruth J (2008) Application of dimensional analysis to selective laser melting. Rapid Prototyp J 1:15–22 Manvatkar V, De A, Debroy T (2014) Heat transfer and material flow during laser assisted multi-layer additive manufacturing. J Appl Phys 116:124905. https://doi.org/10.1063/1.4896751 Li X, Liu Y, Wei W et al (2016) Influence of NbC and VC on microstructures and mechanical properties of WC-Co functionally graded cemented carbides. Mater Des 90:562–567 Han Y, Shi J, Xu L et al (2011) TiC precipitation induced effect on microstructure and mechanical properties in low carbon medium manganese steel. Mater Sci Eng A 530:643–651 Schirra JJ, Caless RH, Hatala RW (1991) The effect of Laves phase on the mechanical properties of wrought and cast + HIP Inconel 718. Min Mater Soc 718(625):375–388 Seow CE, Coules HE, Wu G et al (2019) Wire + arc additively manufactured Inconel 718: effect of post-deposition heat treatments on microstructure and tensile properties. Mater Des 183:108157. https://doi.org/10.1016/j.matdes.2019.108157 Donghyun V, Dinda GP, Jaewoong P et al (2020) Enhancing hardness of Inconel 718 deposits using the aging effects of cold metal transfer-based additive manufacturing. Mater Sci Eng A 776:139005. https://doi.org/10.1016/j.msea.2020.139005 Zhang D, Feng Z, Wang C et al (2018) Comparison of microstructures and mechanical properties of Inconel 718 alloy processed by selective laser melting and casting. Mater Sci Eng A 724:357–367 Asala G, Andersson J, Ojo OA (2019) Hot corrosion behaviour of wire-arc additive manufactured Ni-based superalloy ATI 718Plus®. Corros Sci 158:108086. https://doi.org/10.1016/j.corsci.2019.07.010 de García Andrés C, Caballero FG, Capdevila C et al (2002) Revealing austenite grain boundaries by thermal etching: advantages and disadvantages. Mater Charact 49:121–127 Zhao Y, Li F, Chen S et al (2019) Unit block-based process planning strategy of WAAM for complex shell-shaped component. Int J Adv Manuf Technol 104:3915–3927 Baufeld B (2012) Mechanical properties of Inconel 718 parts manufactured by shaped metal deposition (SMD). J Mater Eng Perform 21:1416–1421 Xu X, Ding J, Ganguly S et al (2019) Investigation of process factors affecting mechanical properties of Inconel 718 superalloy in wire + arc additive manufacture process. J Mater Process Technol 265:201–209 Zhong C, Gasser A, Kittel J et al (2016) Improvement of material performance of Inconel 718 formed by high deposition-rate laser metal deposition. Mater Des 98:128–134 Yao M, Yao Z, Tao X et al (2020) Effect of deposition modes on electron beam directed energy deposited Inconel 718. Mater Sci Technol 36:1556–1565