Effect of an ethanol–biodiesel–diesel blend on a common rail injection system

Payri, 2009, Effects of nozzle geometry on direct injection diesel engine combustion process, Applied Thermal Engineering, 29, 2051, 10.1016/j.applthermaleng.2008.10.009 Martínez-Martínez, 2008, Liquid penetration length in direct diesel fuel injection, Applied Thermal Engineering, 10.1016/j.applthermaleng.2007.11.006 Lee, 2006, Effect of split injection on the macroscopic development and atomization characteristics of a diesel sprays injected through a common-rail system, Atomization and Sprays, 16, 10.1615/AtomizSpr.v16.i5.50 Gondal, 1991, Wear investigations of injector nozzle using radionuclide technique, Wear, 147, 10.1016/0043-1648(91)90193-X Lindholm, 2003, Characterisation of wear on a cam follower system in a diesel engine, Wear, 254, 1199, 10.1016/S0043-1648(03)00335-1 Kegl, 2006, Experimental analysis of injection characteristics using biodiesel fuel, Energy & Fuels, 20, 2239, 10.1021/ef060285m Aydin, 2010, Effect of ethanol blending with biodiesel on engine performance and exhaust emissions in a CI engine, Applied Thermal Engineering, 30, 1199, 10.1016/j.applthermaleng.2010.01.037 Huang, 2009, Experimental investigation on the performance and emissions of a diesel engine fuelled with ethanol-diesel blends, Applied Thermal Engineering, 29, 2484, 10.1016/j.applthermaleng.2008.12.016 Celik, 2008, Experimental determination of suitable ethanol-gasoline blend rate at high compression ratio for gasoline engine, Applied Thermal Engineering, 28, 396, 10.1016/j.applthermaleng.2007.10.028 Lapuerta, 2009, Effect of ethanol on blending stability and diesel engine emissions, Energy and Fuel, 23, 4343, 10.1021/ef900448m Lapuerta, 2008, Emissions from a diesel–bioethanol blend in an automotive diesel engine, Fuel, 87, 25, 10.1016/j.fuel.2007.04.007 Shi, 2006, Emission reduction potential of using ethanol-biodiesel-diesel fuel blend on a heavy-duty diesel engine, Atmospheric Environment, 40, 2567, 10.1016/j.atmosenv.2005.12.026 Di, 2009, Comparison of the effect of biodiesel-diesel and ethanol-diesel on the gaseous emission of a direct-injection diesel engine, Atmospheric Environment, 43, 2721, 10.1016/j.atmosenv.2009.02.050 Lapuerta, 2009, Lubricity of eth–nol–biodiesel-diesel fuel blends, Energy Fuels Arkoudeas, 2008, The tribological behavior of essential oils in low sulphur automotive diesel, Fuel, 87, 3648, 10.1016/j.fuel.2008.06.008 Ali, 1995, Durability testing of a diesel fuel, methyl tallowate and ethanol blend in a cummins n14-410 diesel engine McCormick, 2001, Technical Barriers to the Use of Ethanol in diesel Fuel Hansen, 2005, Ethanol–diesel fuel blends — a review, Bioresource Technology, 96, 277, 10.1016/j.biortech.2004.04.007 Lapuerta, 2007, Stability of diesel–bioethanol blends for use in diesel engines, Fuel, 86, 1351, 10.1016/j.fuel.2006.11.042 McCormick, 2007, Several factors affecting the stability of biodiesel in standard accelerated tests, Fuels Processing Technology, 88, 641-641 Araújo, 2009, A rapid method for evaluation of the oxidation stability of castor oil FAME: influence of antioxidant type and concentration, Fuels Processing Technology, 90, 1272, 10.1016/j.fuproc.2009.06.009 Macian, 2003, New technique for determination of internal geometry of a diesel nozzle with use of silicone methodology, Experimental Techniques, 27, 39, 10.1111/j.1747-1567.2003.tb00107.x