Effect of Wheat Straw Ash on Fresh and Hardened Concrete Reinforced with Jute Fiber

Advances in Civil Engineering - Tập 2021 Số 1 - 2021
Naraindas Bheel1, Samiullah Sohu2, Paul O. Awoyera3, Ashok Kumar4, Suhail Ahmed Abbasi2, Oladimeji B. Olalusi5
1Department of Civil and Environmental Engineering, Universiti Teknologi Petronas, Bandar Seri Iskandar, Tronoh, Perak 31750, Malaysia
2Department of Civil Engineering, Quaid-e-Awam University of Engineering, Science & Technology, Campus Larkana, Nawabshah, Pakistan
3Department of Civil Engineering, Covenant University, Ota, Nigeria
4Department of Civil Engineering, College of Engineering and Technology, University of Sargodha, Sargodha, Pakistan
5Department of Civil Engineering, University of Kwazulu-Natal, Durban, South Africa

Tóm tắt

In the present era, a number of researchers are using either industrial or agricultural priceless products as a basic source of raw materials for the construction industry. These waste products are economical and helpful in producing a sustainable environment and reducing environmental pollution, which is called handling waste products. However, this research work was conducted on concrete containing 0.25%, 0.50%, 0.75%, and 1% of jute fiber as reinforcement material and 10%, 20%, 30%, and 40% of wheat straw ash (WSA) as replacement for fine aggregates. Moreover, the separate and combined effect of jute fiber and WSA as a replacement for sand ingredient in concrete is to determine the fresh and hardened properties of concrete. In this research, a number of concrete samples were prepared with 1 : 1.5 : 3 mix proportion at 0.54 water‐cement ratio and cured at 28 days. The experimental outcomes displayed that the compressive, splitting tensile, and flexural strengths improved by 32.88 MPa, 3.80 MPa, and 5.30 MPa at 0.50% of jute fiber along with 30% of WSA at 28 days consistently. Similarly, the modulus of elasticity was developed while the dosages of jute fiber and WSA increased together in concrete. Moreover, the permeability and workability of concrete were reduced while utilized jute fiber and WSA increased together in concrete.

Từ khóa


Tài liệu tham khảo

10.1016/j.compstruct.2013.07.033

Chandramouli R. P., 2010, Strength properties of glass fibre concrete, Composite Structures, 5, 1

10.1016/j.conbuildmat.2016.09.035

10.1016/j.compstruct.2008.03.006

Kosmatka S. H., 2011, Design and Control of Concretemixtures

10.1680/jcoma.16.00073

10.1007/s40069-013-0059-7

Sethunarayanan R., 1989, Natural fiber reinforced concrete, International Journal of Concrete Structures and Materials, 5, 57

10.1016/j.cemconcomp.2016.02.014

10.1016/j.compositesa.2015.08.038

10.1016/j.proeng.2014.12.448

10.1016/j.conbuildmat.2016.02.182

10.1016/0262-5075(81)90006-3

10.1016/j.cemconcomp.2004.09.006

10.1186/s40064-015-1504-7

10.1007/bf02902998

10.3844/jmssp.2015.93.98

10.1016/j.conbuildmat.2018.09.048

10.1016/j.jenvman.2010.04.008

Pan X., 2005, Fractionation of wheat straw by atmospheric acetic acid process, Bioresource Technology, 91

Biricik H., 1999, Study of pozzolanic properties of wheat straw ash, Cement and Concrete Research, 91

Al-Akhras N. M., 2002, Efect of wheat straw ash on mechanical properties of autoclaved mortar, Cement and Concrete Research, 91

Qudoos A., 2018, Efect of mechanical processing on the pozzolanic efciency and the microstructure development of wheat straw ash blended cement composites, Construction and Building Materials, 5

ASTM, 2008, Standard Specification for Coal Fly Ash and Raw or Calcined Natural Pozzolan for Use in Concrete

ASTM, 2005, Standard Test Method for Sieve Analysis of Fine and Coarseaggregates

ASTM, 1997, Standard test Method for Bulk Density (“Unit Weight”)and Voids in Aggregate

ASTM C128, 1993, Standard Method of Test for Specific Gravity and Water Absorptionof Fine Aggregate

ASTM C127, 1993, Standard Method of Test for Specific Gravity and Water Absorptionof Coarse Aggregate

Standard, 1991, Standard test method for slump of hydraulic cementconcrete, Annual book of ASTM Standards, 4

Standard, 2015, Standard test method for compressive strength ofConcrete specimens, Annual Book of ASTM Standards, 9

ASTM Test for Splitting Tensile Strength of Cylindrical Concretespecimens 1990.

ASTM, 2008, Standard Test Method for Flexural Strength of Concrete (UsingSimple Beam with Center-Point Loading)

ASTM C469 Standard test method for static modulusof elasticity and Poisson′s ratio of concrete in compression 2014 Annual Book of ASTM Standards West Conshohocken PA USA.

British Standard Institution, 2009, BS EN 12390-8: Testing HardenedConcrete: Part 8: Depth of Penetration of Water under Pressure

10.1016/j.cscm.2020.e00412

10.1007/s41024-020-00099-7

10.48084/etasr.3363

Dayo A. A., 2019, Use of sugarcane bagasse ash as a fine aggregate in cement concrete, Engineering Science and Technology International Research Journal, 3, 8

KeerioM. A. AbbasiS. A. KumarA. BheelN. ur RehamanK. andTashfeenM. Effect of silica fume as cementitious material and waste glass as fine aggregate replacement constituent on selected properties of concrete 2020.

10.1186/s40689-016-0022-5

Kanaka P., 2017, Experimental study on partial replacement of fine aggregate with glass waste, International Journal for Scientific Research & Development, 5

Bajad M. N., 2011, Effect of glass on strength of concrete subjected to sulphate attack, International Journal of Civil Engineering Research and Development (IJCERD), 1, 1

10.1016/j.tws.2014.04.013

Mello E., 2014, Improving concrete properties with fibers addition, International Journal of Civil and Environmental Engineering, 8, 249

10.1155/2020/8851030

BheelN.andAdesinaA. Influence of binary blend of corn cob ash and glass powder as partial replacement of cement in concrete 2020.

DayoA. A. KumarA. RajaA. BheelN. AbroA. W. andShaikhZ. H. Effect of sugarcane bagasse ash as fine aggregates on the flexural strength of concrete 2019.

BheelN. MemonF. A. andMeghwarS. L. Study of fresh and hardened properties of concrete using cement with modified blend of millet husk ash as secondary cementitious 2020.

FoongK. Y. AlengaramU. J. JumaatM. Z. andMoK. H. Enhancement of the mechanical properties of lightweight oil palm shell concrete using rice husk ash and manufactured sand 2015.

Bheel N., 2020, Influence of coconut shell ash on workability, mechanical properties, and embodied carbon of concrete, Environmental Science and Pollution Research, 34, 1

10.1016/j.conbuildmat.2012.02.017