Effect of Stacking Sequence on Low-Velocity Impact Behavior of Metal Laminates

Katnam, K.B., Crocombe, A.D., Khoramishad, H., and Ashcroft, I.A., The Static Failure of Adhesively Bonded Metal Laminate Structures: A Cohesive Zone Approach, J. Adhes. Sci. Technol., 2011, vol. 25, no. 10, pp. 1131–1157.

Katnam, K.B., Crocombe, A.D., Sugiman, H., Khoramishad, H., and Ashcroft, I.A., Static and Fatigue Failures of Adhesively Bonded Laminate Joints in Moist Environments, Int. J. Damage Mech., 2011, vol. 20, pp. 1217–1242.

Sato, C., Impact, in Modeling of Adhesively Bonded Joints, da Silva, L. and Ochsner, A., Eds., Berlin: Springer, 2008, pp. 279–303.

Borvik, T., Langseth, M., Hopperstad, O.S., and Malo, K.A., Perforation of 12 mm Thick Steel Plates by 20 mm Diameter Projectiles with Flat, Hemispherical and Conical Noses: Part I: Experimental Study, Int. J. Impact Eng., 2002, vol. 27, no. 1, pp. 19–35.

Higuchi, I., Sawa, T., and Suga, H., Three-Dimensional Finite Element Analysis of Single-Lap Adhesive Joints under Impact Loads, J. Adhes. Sci. Technol., 2002, vol. 16, no. 12, pp. 1585–1601.

Higuchi, I., Sawa, T., and Suga, H., Three-Dimensional Finite Element Analysis of Single-Lap Adhesive Joints Subjected to Impact Bending Moments, J. Adhes. Sci. Technol., 2002, vol. 16, no. 10, pp. 1327–1342.

Sato, C. and Ikegami, K., Dynamic Deformation of Lap Joints and Scarf Joints under Impact Loads, Int. J. Adhes. Adhes., 2000, vol. 20, no. 1, pp. 17–25.

Prakash, A., Rajasankar, J., Anandavalli, N., Verma, M., and Iyer, N.R., Influence of Adhesive Thickness on High Velocity Impact Performance of Ceramic/Metal Composite Targets, Int. J. Adhes. Adhes., 2013, vol. 41, pp. 186–197.

Arias, A., Zaera, R., Lypez-Puente, J., and Navarro, C., Numerical Modeling of the Impact Behavior of New Particulate-Loaded Composite Materials, Compos. Struct., 2003, vol. 61, no. 1-2, pp. 151–159.

Kihara, K., Isono, H., Yamabe, H., and Sugibayashi, T., A Study and Evaluation of the Shear Strength of Adhesive Layers Subjected to Impact Loads, Int. J. Adhes. Adhes., 2003, vol. 23, no. 4, pp. 253–259.

Yu, M., Jia, L.Y., Xiao, L.Z., Ding, F.Z., and Jing, R.H., 3-D Finite Element Analysis of Bonded Joints under Impact Loading, Adv. Mater. Res., 2010, vol. 97-101, pp. 763–766.

Yildirim, M. and Apalak, M.K., Transverse Low-Speed Impact Behavior of Adhesively Bonded Similar and Dissimilar Clamped Plates, J. Adhes. Sci. Technol., 2011, vol. 25, no. 1-3, pp. 69–91.

Khoramishad, H. and Bagheri Tofighi, M., Effects of Mechanical and Geometrical Properties of Adhesive and Metal Layers on Low-Velocity Impact Behavior of Metal Laminate Structures, J. Adhes. Sci. Technol., 2015, vol. 29, pp. 592–608.

Qiao, P., Yang, M., and Bobaru, F., Impact Mechanics and High-Energy Absorbing Materials: Review, J. Aerospace Eng., 2008, vol. 21, no. 4, pp. 235–248.

Fernando, L. and Rincon, T., Analysis and Performance of Adhesively Bonded Crush Tube Structures: Master Thesis, Waterloo, Canada: University of Waterloo, 2012.

Herbert, E.G., Pharr, G.M., Oliver, W.C., Lucas, B.N., and Hay, J.L., On the Measurement of Stress-Strain Curves by Spherical Indentation, Thin Solid Films, 2001, vol. 398-399, pp. 331–335.

Quesada, A., Influence of the Parameters of the Material Model in Finite Element Simulation of Sheet Metal Stamping, in 7th EUROMECHSolid, 2009.

Buchar, J., Rolc, S., Voldrich, J., Lazar, M., and Starek, M., The Development of the Glass Laminates Resistant to the Small Arms Fire, in 19th Int. Symp. Ballistics, 2001, pp. 1439–1445.

Shetty, R., Laxmikant, K., Pai, R., and Rao, S.S., Finite Element Modeling of Stress Distribution in the Cutting Path in Machining of Discontinuously Reinforced Aluminium Composites, Network, 2008, vol. 3, pp. 25–31.