Effect of PEG additive on the morphology and performance of polysulfone ultrafiltration membranes

Staude, 1991, Polysulfones and their derivatives: materials for membranes for different separation operations, J. Appl. Polym. Sci., 43, 559, 10.1002/app.1991.070430317

Chung, 1998, Development of polysulfone membranes for bacteria immobilization to remove phenol, J. Appl. Polym. Sci., 70, 2585, 10.1002/(SICI)1097-4628(19981226)70:13<2585::AID-APP4>3.0.CO;2-#

Pouliot, 1999, Fractionation of whey protein hydrolysates using charged UF/NF membranes, J. Membr. Sci., 158, 105, 10.1016/S0376-7388(99)00006-X

Xu, 1999, Treatment of textile dye plant effluent by nanofiltration membrane, Sep. Sci. Technol., 34, 2501, 10.1081/SS-100100787

Kosutic, 2000, Porosity of some commercial reverse osmosis and nanofiltration polyamide thin-film composite membranes, J. Membr. Sci., 168, 101, 10.1016/S0376-7388(99)00309-9

Wijmans, 1983, The mechanism of formation of microporous or skinned membranes produced by the immersion precipitation process, J. Membr. Sci., 14, 263, 10.1016/0376-7388(83)80005-2

Reuvers, 1987, Formation of membranes by means of immersion precipitation. Part I A. Model to describe mass transfer during immersion precipitation, J. Membr. Sci., 34, 45, 10.1016/S0376-7388(00)80020-4

Boom, 1992, Microstructures in phase inversion membranes. Part 2. The role of a polymeric additive, J. Membr. Sci., 73, 277, 10.1016/0376-7388(92)80135-7

Wienk, 1996, Recent advances in the formation of phase inversion membranes made from amorphous or semi-crystalline polymers, J. Membr. Sci., 113, 361, 10.1016/0376-7388(95)00256-1

Mosqueda-Jimenez, 2004, Influence of processing conditions on the properties of ultrafiltration membranes, J. Membr. Sci., 231, 209, 10.1016/j.memsci.2003.11.026

Yeo, 2000, Role of polymer additive in casting solution in preparation of phase inversion polysulfone membranes, J. Chem. Eng. Jpn., 33, 180, 10.1252/jcej.33.180

Jung, 2004, Effect of molecular weight of polymeric additives on formation, permeation properties and hypochlorite treatment of asymmetric polyacrylonitrile membranes, J. Membr. Sci., 243, 45, 10.1016/j.memsci.2004.06.011

Han, 2002, Thermodynamic and rheological variation in polysulfone solution by PVP and its effect in the preparation of phase inversion membrane, J. Membr. Sci., 202, 55, 10.1016/S0376-7388(01)00718-9

Xu, 1999, Polymeric asymmetric membranes made from polyetherimide/polybenzimidazole/poly(ethylene glycol) (PEI/PBI/PEG) for oil–surfactant–water separation, J. Membr. Sci., 158, 41, 10.1016/S0376-7388(99)00030-7

Kim, 2004, Effect of poly(ethylene glycol) 200 on the formation of a polyetherimide asymmetric membrane and its performance in aqueous solvent mixture permeation, J. Membr. Sci., 230, 183, 10.1016/j.memsci.2003.11.002

Saljoughi, 2010, Effect of PEG additive and coagulation bath temperature on the morphology, permeability and thermal/chemical stability of asymmetric CA membranes, Desalination, 262, 72, 10.1016/j.desal.2010.05.046

Shieh, 2001, Gas separation performance of poly(4-vinylpyridine)/polyetherimide composite hollow fibers, J. Membr. Sci., 182, 111, 10.1016/S0376-7388(00)00560-3

Idris, 2007, Synthesis, characterization and performance of asymmetric polyethersulfone (PES) ultrafiltration membranes with polyethylene glycol of different molecular weights as additives, Desalination, 207, 324, 10.1016/j.desal.2006.08.008

Chakrabarty, 2008, Effect of molecular weight of PEG on membrane morphology and transport properties, J. Membr. Sci., 309, 209, 10.1016/j.memsci.2007.10.027

Kim, 1998, Effect of PEG additive on membrane formation by phase inversion, J. Membr. Sci., 138, 153, 10.1016/S0376-7388(97)00224-X

Arthanareeswaran, 2010, Preparation, characterization and performance studies of ultrafiltration, membranes with polymeric additive, J. Membr. Sci., 350, 130, 10.1016/j.memsci.2009.12.020

Blanco, 2006, Formation and morphology studies of different polysulfones-based membranes made by wet phase inversion process, J. Membr. Sci., 283, 27, 10.1016/j.memsci.2006.06.011

Mulder, 1991

Reuvers, 1987, Formation of membranes by means of immersion precipitation. Part II, The mechanism of formation of membranes prepared from the system cellulose acetate–acetone–water, J. Membr. Sci., 34, 67, 10.1016/S0376-7388(00)80021-6

Kimmerle, 1990, Analysis of the structure-determining process of phase inversion membranes, Desalination, 79, 283, 10.1016/0011-9164(90)85012-Y

Strathmann, 1975, The formation mechanism of asymmetric membranes, Desalination, 16, 179, 10.1016/S0011-9164(00)82092-5

Malaisamy, 2002, Polyurethane and sulfonated polysulfone blend ultrafiltration membranes, J. Colloid Interface Sci., 254, 129, 10.1016/S0021-9797(02)98348-7

Keurentjes, 1989, Hydrophobicity measurements of MF and UF membranes, J. Membr. Sci., 47, 333, 10.1016/S0376-7388(00)83084-7

Palacio, 1999, Contact angles and external protein adsorption onto ultrafiltration membranes, J. Membr. Sci., 152, 189, 10.1016/S0376-7388(98)00203-8