Effect of Low Additions of Y, Sm, Gd, Hf and Er on the Structure and Hardness of Alloy Al – 0.2% Zr – 0.1% Sc

A. V. Pozdnyakov1, Alexandra A. Osipenkova1, Д. А. Попов2, С. В. Махов1, В. И. Напалков2
1National University of Science and Technology “MISiS”, Moscow, Russia
2“Intermix Met” Company, Moscow, Russia

Tóm tắt

Từ khóa


Tài liệu tham khảo

C. B. Fuller, J. L. Murray, and D. N. Seidman, “Temporal evolution of the nanostructure of Al(Sc, Zr) alloys. Part I. Chemical compositions of Al3(Sc1 – x Zr x ) precipitates,” Acta Mater., 53, 5401 – 5413 (2005).

C. B. Fuller and D. N. Seidman, “Temporal evolution of the nanostructure of Al(Sc, Zr) alloys. Part II. Coarsening of Al3(Sc1 –x Zr x ) precipitates,” Acta Mater., 53, 5415 – 5428 (2005).

W. Lefebvrea, F. Danoixa, H. Hallem, et al., “Precipitation kinetics of Al3(Sc, Zr) dispersoids in aluminum,” J. Alloys Compd., 470, 107 – 110 (2009).

A. K. Lohara, B. Mondala, D. Rafajab, et al., “Microstructural investigations of as-cast and annealed Al – Sc and Al – Sc – Zr alloys,” Mater. Charact., 60, 1387 – 1394 (2009).

V. Ocenasek and M. Slamova, “Resistance to recrystallization due to Sc and Zr additions to Al – Mg alloys,” Mater. Charact., 47, 157 – 162 (2001).

Gen Li, Naiqin Zhao, Tao Liu, et al., “Effect of Sc/Zr ratio on the microstructure and mechanical properties of new type of Al – Zn – Mg – Sc – Zr alloys,” Mater. Sci. Eng. A, 617, 219 – 227 (2014).

C. B. Fuller, A. R. Krause, D. C. Dunand, and D, N. Seidman, “Microstructure and mechanical properties of a 5754 aluminum alloy modified by Sc and Zr additions,” Mater. Sci. Eng. A, 338, 8 – 16 (2002).

V. G. Davydov, T. D. Rostova, V. V. Zakharov, et al., “Scientific principles of making an alloying addition of scandium to aluminum alloys,” Mater. Sci. Eng. A, 280, 30 – 36 (2000).

Yu. A. Filatov, V. I. Elagin, and V. V. Zakharov, “New Al –Mg – Sc alloys,” Mater. Sci. Eng. A, 280, 97 – 101 (2000).

C. Booth-Morrison, D. C. Dunand, and D. N. Seidman, “Coarsening resistance at 400°C of precipitation-strengthened Al – Zr – Sc – Er alloys,” Acta Mater., 59, 7029 – 7042 (2011).

S. P.Wen, L. Y. Gao, Y. Li, et al., “Synergetic effect of Er and Zr on the precipitation hardening of Al – Er – Zr alloy,” Scr. Mater., 65, 592 – 595 (2011).

H. L. Hao, D. R. Ni, Z. Zhang, et al., “Microstructure and mechanical properties of Al – Mg – Er sheets jointed by friction stir welding,” Mater. Design, 52, 706 – 712 (2013).

Yang Dongxi, Li Xiaoyan, He Dingyong, and Huang Hui, “Effect of minor Er and Zr on microstructure and mechanical properties of Al – Mg – Mn alloy (5083) welded joints,” Mater. Sci. Eng. A, 561, 226 – 231 (2013).

Y. Zhang, H. Gao, Y. Kuai, et al., “Effects of Y additions on the precipitation and recrystallization of Al – Zr alloys,” Mater. Charact., 86, 1 – 8 (2013).

XingGuo Zhang, FeiQiang Mei, Huan Yue Zhang, et al. “Effects of Gd and Y additions on microstructure and properties of Al – Zn – Mg – Cu – Zr alloys,” Mater. Sci. Eng. A, 552, 230 – 235 (2012).

C. Booth-Morrison, D. N. Seidman, and D. C. Dunand, “Effect of Er additions on ambient and high-temperature strength of precipitation-strengthened Al – Zr – Sc – Si alloys,” Acta Mater., 60, 3643 – 3654 (2012).

H. Li, Z. Gao, H. Yin, et al., “Effect of Er and Zr additions on precipitation and recrystallization of pure aluminum,” Scr. Mater., 68, 59 – 62 (2013).

L. Z. He, X. H. Li, Z. T. Liu, et al., “Effects of homogenization on microstructures and properties of a new type Al –Mg –Mn – Zr – Ti – Er alloy,” Mater. Sci. Eng. A, 527, 7510 – 7518 (2010).

N. Q. Vo, D. C. Dunand, and D. N. Seidman, “Improving aging and creep resistance in a dilute Al – Sc alloy by microalloying with Si, Zr and Er,” Acta Mater., 63, 73 – 85 (2014).

M. E. Van Dalen, D. C. Dunand, and D. N. Seidman, “Microstructural evolution and creep properties of precipitationstrengthened Al – 0.06Sc – 0.02Gd and Al – 0.06Sc – 0.02Yb (at.%) alloys,” Acta Mater., 59, 5224 – 5237 (2011).

S. P. Wen, K. Y. Gao, H. Huang, et al., “Precipitation evolution in Al – Er – Zr alloys during aging at elevated temperature,” J. Alloys Compd., 574, 92 – 97 (2013).

H. Hallem, W. Lefebvre, B. Forbord, et al., “The formation of Al3(Sc x Zr y Hf1– x – y )-dispersoids in aluminum alloys,” Mater. Sci. Eng. A, 421, 154 – 160 (2006).

N. P. Lyakishev, O. A. Bannykh, L. L. Rokhlin, et al., Phase Diagrams of Binary Metallic Systems, Vol. 1 [in Russian], Mashinostroenie, Moscow (1996), 992 p.