Effect of GGBS Addition on Reactivity and Microstructure Properties of Ambient Cured Fly Ash Based Geopolymer Concrete

Damtoft JS, Lukasik J, Herfort D, Sorrentino D, Gartner EM (2008) Sustainable development and climate change initiatives. Cem Concr Res 38(2):115–127

Juenger MCG, Winnefeld F, Provis JL, Ideker JH (2011) Advances in alternative cementitious binders. Cem Concr Res 41(12):1232–1243

Davidovits J (1994) Global warming impact on the cement and aggregates industries. World Resource Review 6(2):263–278

Van Deventer JSJ, Provis JL, Duxson P, Brice DG (2010) Chemical research and climate change as drivers in the commercial adoption of alkali activated materials. Waste Biomass Valor 1:145–155

Van Deventer JSJ, Provis JL, Duxson P (2012) Technical and commercial progress in the adoption of geopolymer cement. Min Eng 29:89–104

Xie T, Ozbakkaloglu T (2015) Behavior of low-calcium fly and bottom ash-based geopolymer concrete cured at ambient temperature. Ceram Int 41:5945–5958. https://doi.org/10.1016/j.ceramint.2015.01.031

Davidovits J (2002) Environmentally driven Geopolymer cement applications. Geopolymer Conference 1–9

Davidovits J (1989) Geopolymers and geopolymeric materials. J Therm Anal 35(2):429–441. https://doi.org/10.1007/bf01904446

Khale D, Chaudhary R (2007) Mechanism of geopolymerization and factors influencing its development: a review. J Mater Sci 42(3):729–746. https://doi.org/10.1007/s10853-006-0401-4

Van Jaarsveld JGS, Van Deventer JSJ (1999) Effect of the alkali metal activator on the properties of Fly ash-based Geopolymers. Ind Eng Chem Res 38(10):3932–3941. https://doi.org/10.1021/ie980804b

Hardjito D, Rangan BV (2006) Curtin research report on fly ash based geopolymer concrete, report GC 2. Curtin University of Technology, Australia

Guo X, Shi H, Chen L, Dick WA (2010) Alkali-activated complex binders from class C fly ash and Ca-containing admixtures. J Hazard Mater 173:480–486

Bakharve T (2006) Thermal behaviour of geopolymers prepared using class F fly ash and elevated curing. Cem Concr Res 36:1134–1147

Fernandez-Jimenez A, Palomo A (2003) Characterization of fly ashes. Potential reactivity as alkaline cements: Fuel 82:2259–2265

Swanepoel JC, Strydom CA (2002) Utilization of fly ash in a geopolymeric material. Appl Geochem 17(8):1143–1148. https://doi.org/10.1016/s0883-2927(02)00005-7

Kumar S, Kumar R, Bandopadhyay A, Mehrotra SP (2007a) In: proceedings of international conference on alkali activated materials–research. Production and utilization, Prague, Czech Republic: pp 429

Kumar S, Kumar R, Alex TC, Bandopadhyay A, Mehrotra SP (2005) In: Davidovits J (ed) proceedings of 4th world congress on Geopolymer. France, p 113

Kumar S, Kumar R, Alex TC, Bandopadhyay A, Mehrotra SP (2007b) Influence of reactivity of fly ash on geopolymerisation. Adv Appl Ceram 106(3):120–127. https://doi.org/10.1179/174367607x159293

Kumar S, Kumar R (2011) Mechanical activation of fly ash: effect on reaction structure and properties of resulting geopolymer. Ceram Int 37:533–541

Palmo A, Fernandez-Jimenez A, Kovalchuk G, Ordonez LM, Naranjo MC (2007) OPC-fly ash cementitious systems: study of gel binders produced during alkaline hydration. J Mater Sci 42:2958–2966

Allahverdi A, Kani EN, Yaz danipour M (2011) Effects of blast- furnace slag on natural pozzolan-based geopolymer cement. Ceram-silikaty 55:68–78

Li Z, Liu S (2007) Influence of slag as additive on compressive strength of fly ash-based geopolymer. J Mater Civ Eng 19(6):470–474

Nath P, Sarker PK (2012) Geopolymer concrete for ambient curing condition. In: Proc of Australian Structural Engineering Conference: The Past, Present and Future of Structural Engineering, Barton, Australia vol. 225, p. 32

Rajamane NP (2013) Studies on development of ambient temperature cured fly ash and GGBS based geopolymer concretes (Ph.D. thesis). VTU, Belgaum, India

Ravikumar D, Peethamparam S, Neithalath N (2010) Structure and strength of NaOH activated concrete containing fly ash or GGBFS as the sole binder. Cem Concr Compos 32:399–410

Nanthagopalan P, Santhanam M (2011) Fresh and hardened properties of self compacting concrete produced with manufactured sand. Cem Concr Compos 33(3):353–358

Foong KY, Alengaram UJ, Jumaat MZ, Mo KH (2015) Enhancement of the mechanical properties of lightweight oil palm shell concrete using rice husk ash and manufactured sand. J. Zhejiang Univ. Sci. A 16(1):59–69

Nagajothi S, Elavenil S (2019) Influence of Aluminosilicate for the prediction of mechanical properties of Geopolymer concrete – artificial neural network. Silicon:1–11. https://doi.org/10.1007/s12633-019-00203-8

Rangan BV, Hardjito D (2005) Development and properties of low calcium fly ash based Geopolymer concrete research. Research report GC-1, Faculty of Engineering, Curtin university of technology, Perth, Australia

Dattatreya JK, Rajamane NP, Sabitha D, Ambily PS, Nataraja MC (2011) Flexural behaviour of reinforced geopolymer concrete beams. International Journal of Civil and Structural Engineering vol 2 No 1

Ryu GS, Lee YB, Koh KT, Chung YS (2013) The mechanical properties of fly ash-based geopolymer concrete with alkaline activators. Constr Build Mater 47:409–418

Rashad AM (2014) A comprehensive overview about the influence of different admixtures and additives on the properties of alkali-activated fly ash. Mater Des 53(0):1005–1025

Wongpa J, Kiattikomol K, Jaturapitakkul C, Chindaprasirt P (2010) Compressive strength modulus of elasticity and water permeability of inorganic polymer concrete. Mater Des 31(10):4748–4754

Nagajothi S, Elavenil S (2018) Parametric Studies on Workability and Compressive Strength Properties Geopolymer Concrete. Journal of the Mechanical Behavior of Materials, Volume no 27, Issue 3–4

Chen H, Gong W, Lutze W, Pegg IL, Zhai J (2011) Kinetics of fly ash leaching in strongly alkaline solutions. J Mater Sci 46:590–597

Zhuang XY, Liang C, Komarneni S, Zhou CH, Tong DS, Yang HM, Yu WH, Wang H (2016) Fly ash based geopolymer: clean production, properties and applications. J Clean Prod 125:253–267

Yang T, Yao X, Zhang Z, Wang H (2012) Mechanical property and structure of alkali activated flyash andslag blends. J Sustain Cem based Mater 1(4):167–178

Garcia-Lodeiro I, Palomo A, Fernández-Jiménez A, Macphee DE (2011) Compatibility studies between N-A-S-H and C-A-S-H gels. Study in the ternary diagram Na2O–CaO–Al2O3–SiO2–H2O. Cem Concr Res 41:923–931

Yang KH, Song J, Lee KS, Ashour AF (2009) Flow and compressive strength of alkali activated mortars. ACI Material journal 106(1):50–58

De Silva P, Sirivivatnanon V (2007) Kinetics of geopolymerization : role of Al2O3 and SiO2. Cem Concr Res 37:512–518

Davidovits J (1999) Chemistry of geopolymeric systems, terminology. Geopolymere’99. Proceedings of Geopolymer Second International Conference. Saint-Quentin.9–39

Somna K, Jaturapitakkul C, Kajitvichyanukul P, Chindaprasirt P (2011) NaOH-activated ground fly ash geopolymer cured at ambient temperature. Fuel 90(6):2118–2124

Kumar S, Kumar R, Mehrotra SP (2010) Influence of granulated blast furnace slag on the reaction, structure and properties of fly ash based geopolymer. J Mater Sci 45:607–615. https://doi.org/10.1007/s10853-009-3934-5