Effect of EMIMBF4 ionic liquid addition on the structure and ionic conductivity of LiBF4-complexed PVdF-HFP polymer electrolyte films

Tsao, 2015, Poly(dimethylsiloxane) hybrid gel polymer electrolyte of a porous structure for lithium ion battery, J. Membr. Sci., 489, 36 Brown, 1987, Polymer electrolyte review: Editedy by J.R. MacCallum and C.A. Vincent Elsevier Applied Science Published Ltd, Barking, Polym. Test., 7, 358 Kim, 2015, Effect of sulfonated poly(arylene ether sulfone) binder on the performance of polymer electrolyte membrane fuel cells, J. Ind. Eng. Chem., 23, 316 Ramesh, 2011, Effect of ethylene carbonate in poly (methyl methacrylate)-lithium tetraborate based polymer electrolyte, J. Non-Cryst. Solids, 357, 1357 Cha, 2006, Ionic conductance of PDMAEMA/PEO polymeric electrolyte containing lithium salt mixed with plasticizer, J. Power Sources, 163, 269 Song, 2000, Conductivity study of porous plasticized polymer electrolytes based on poly(vinylidene fluoride) a comparison with polypropylene separators, J. Electrochem. Soc., 147, 3219 M. Ravi, Shenhua Song, Jingwei Wang, Reddeppa Nadimicherla, Zhongyi Zhang, Preparation and Characterization Of Biodegradable Poly(ε-caprolactone)-based Gel Polymer Electrolyte Films, IONICS, DOI 10.1007/s11581-0151-1586-9. 2005, vol. 913 Aouada, 2006, Electrochemical and mechanical properties of hydrogels based on conductive poly(3,4-ethylenedioxythiophene)/poly(styrenesulfonate) and PAAm, Polym. Test., 25, 158 Liew, 2014, Good prospect of ionic liquid based poly(vinyl alcohol) polymer electrolytes for supercapacitors with excellent electrical, electrochemical and thermal properties, Int. J. Hydrogen Energy, 39, 2953 Dias, 2015, High performance electrochemical actuators based on ionic liquid/poly(vinylidene fluoride), Polym. Test., 48, 199 Ramesh, 2011, Evaluation and investigation on the effect of ionic liquid onto PMMA-PVC gel polymer blend electrolytes, J. Non-Cryst. Solids, 357, 2132 Pandey, 2013, Solid-state supercapacitors with ionic liquid based gel polymer electrolyte: effect of lithium salt addition, J. Power Sources, 243, 211 Cao, 2006, Structure and ionic conductivity of porous polymer electrolytes based on PVdF-HFP copolymer membranes, J. Membr. Sci., 28, 446 Li, 2008, Research on a gel polymer electrolyte for Li-ion batteries, Pure Appl. Chem., 80, 2553 Abbrent, 2001, Crystallinity and morphology of PVdF-HFP based gel electrolyte, Polymer, 42, 1407 Li, 2006, A porous polymer electrolyte based on P(VDF-HFP) prepared by a simple phase separation process, Electrochem. Commun., 281, 446 Kiran Kumar, 2014, Investigation on PEO/PVP/NaBr complexed polymer blend electrolytes for electrochemical cell applications, J. Membr. Sci., 454, 200 Li, 2013, PVdF-HFP based composite microporous gel polymer electrolytes containing a novelsingle ionic conductor SiO2 (Li+), Electrochim. Acta, 112, 183 Ravi, 2014, Effect of nano TiO2, filler on the structural and electrical properties of PVP based polymer electrolyte films, Polym. Test., 33, 152 Klongkan, 2015, Effect of nano alumina and plasticizers on morphology, ionic conductivity, thermal and mechanical properties of PEO-LiCF3SO3 solid polymer electrolyte, Electrochim. Acta, 161 Shalu, 2013, Thermal stability, complexing behavior, and ionic transport of polymeric gel membranes based on polymer PVdF-HFP and ionic liquid [BMIMBF4], J. Phys. Chem. B, 117, 897 Ramesh, 2013, A simple P(VdF-HFP)-LiTf system yielding highly ionic conducting and thermally stable solid polymer electrolytes, J. Mol. Liq., 177, 73 Kumar, 2010, Ionic liquid based sodium ion conducting gel polymer electrolytes, Solid State Ion., 181, 416 Nadimicherla, 2015, Effects of potassium iodide (KI) on crystallinity, thermal stability, and electrical properties of polymer blend electrolytes (PVC/PEO: KI), Solid State Ion., 278, 260 Hirankuram, 2006, Ag+ ion transport studies in a polyvinyl alcohol-based polymer electrolyte system, J. Solid State Electrochem., 10, 193