Effect of Chloride Ion on the Corrosion Behavior of 316L Stainless Steels in Hydrofluoric Acid Solution

H. Dai, S. Shi, C. Guo, and X. Chen, Pits Formation and Stress Corrosion Cracking Behavior of Q345R in Hydrofluoric Acid, Corros. Sci., 2020, 166, p 108443. H. Dai, S. Shi, L. Yang, J. Hu, C. Liu, C. Guo, and X. Chen, Effects of Elemental Composition and Microstructure Inhomogeneity on the Corrosion Behavior of Nickel-Based Alloys in Hydrofluoric Acid Solution, Corros. Sci., 2020, 176, p 108917. X. Chen, L. Yang, H. Dai, and S. Shi, Exploring Factors Controlling Pre-Corrosion Fatigue of 316L Austenitic Stainless Steel in Hydrofluoric Acid, Eng. Fail. Anal., 2020, 113, p 1–12. Y.-W. Jang, J.-H. Hong, and J.-G. Kim, Effects of Copper on the Corrosion Properties of Low-Alloy Steel in an Acid-Chloride Environment, Met. Mater. Int., 2009, 15(4), p 623–629. H. Dai, S. Shi, L. Yang, C. Guo, and X. Chen, Recent Progress on the Corrosion Behavior of Metallic Materials in HF Solution, Corros. Rev., 2021, 39(4), p 313–337. A.B. Khiabani, A. Ghanbari, B. Yarmand, A. Zamanian, and M. Mozafari, Improving Corrosion Behavior and in vitro Bioactivity of Plasma Electrolytic Oxidized AZ91 Magnesium Alloy using Calcium Fluoride Containing Electrolyte, Mater. Lett., 2018, 212, p 98–102. S. Zhang, L. Hou, H. Du, H. Wei, B. Liu, and Y. Wei, A Study on the Interaction Between Chloride Ions and CO2 Towards Carbon Steel Corrosion, Corros. Sci., 2020, 167, p 108531. S.J. Pawel, Corrosion of High-Alloy Materials in Aqueous Hydrofluoric Acid Environments, Corrosion, 1994, 50(12), p 963–971. S.J. Pawel, Corrosion of High-Alloy Materials in Aqueous Hydrofluoric Acid Environments, Corrosion, 1994, 50(12), p 963–971. P. Xu, H. Chen, X. Zhou, and H. Xiang, Gel Polymer Electrolyte Based on PVDF-HFP Matrix Composited with rGO-PEG-NH2 for High-Performance Lithium Ion Battery, J. Membr. Sci., 2020, 617, p 118660. M. Cai, D. Yuan, X. Zhang, Y. Pu, and X. Ning, Lithium Ion Battery Separator with Improved Performance via Side-by-Side Bicomponent Electrospinning of PVDF-HFP/PI Followed by 3D Thermal Crosslinking, J. Power Sources, 2020, 461, p 228123. Z. Wang, W. Han, H. Tang, and H. Liu, CaBaFx Composite as Robust Catalyst for the Pyrolysis of 1-Chloro-1, 1-Difluoroethane to Vinylidene Fluoride, Catal. Commun., 2019, 120, p 42–45. W. Shi, G. Zou, S. Xiang, X. Ji, G. Ma, and R.G. Ballinger, Corrosion Behavior of 904L Austenitic Stainless Steel in Hydrofluoric Acid, RSC Adv., 2018, 8(5), p 2811–2817. Y. Li, Y. Hou, E. Onodera, C. Zhang, Y. Koizumi, and A. Chiba, Ex-situ Observation on the Dissolution Behaviour of Ni-16Cr-15Mo and Ni-30Co-16Cr-15Mo Alloys in Hydrofluoric Acid, Corros. Sci., 2015, 90, p 133–139. X. Fan, Y. Li, N. Tang, H. Bian, Y. Hou, Y. Koizumi, and A. Chiba, Effects of Partially Substituting Cobalt for Nickel on the Corrosion Resistance of a Ni-16Cr-15Mo Alloy to Aqueous Hydrofluoric Acid, Corros. Sci., 2014, 78, p 101–110. M.G. Fontana, Corrosion Engineering, 3rd ed. McGraw-Hill, New York, 1986. R.B. Rebak, J.R. Dillman, P. Crook, and C.V.V. Shawber, Corrosion Behavior of Nickel Alloys in Wet Hydrofluoric Acid, Mater. Corros., 2001, 52(4), p 289–297. C. Guo, S. Shi, H. Dai, Yu. Jingtai, and Xu. Chen, Corrosion Mechanisms of Nickel-Based Alloys in Chloride-Containing Hydrofluoric Acid Solution, Eng. Fail. Anal., 2022, 140, p 106580. C. Schillmoler, Corrosion Resistance of Nickel-Containing Alloys in Hydrofluoric Acid, Hydrogen Fluoride and Fluorine, NIDI Tech. Ser., 1993, 10074, p 1–10. Z.B. Wang, H.X. Hu, and Y.G. Zheng, Synergistic Effects of Fluoride and Chloride on General Corrosion Behavior of AISI 316 Stainless Steel and Pure Titanium in H2SO4 Solutions, Corros. Sci., 2018, 130, p 203–217. J. Salomé, C. Bachmann, K.D. Oliveira-Vigier, S. Brunet, and J. Lopez, Effect of the Experimental Conditions in the Transformation of the bis-1, 3-Trichloromethylbenzene in the Presence of HF and a LEWIS ACID, J. Mol. Catal. A Chem., 2008, 279(1), p 119–127. A. Piou, S. Celerier, and S. Brunet, Selective Fluorination of Substituted Trichloromethyl Benzenes by HF in Liquid Phase: Preparation of Fluorinated Building Blocks, J. Fluor. Chem., 2010, 131(11), p 1241–1246. J. Salomé, C. Mauger, S. Brunet, and V. Schanen, Synthesis Conditions and Activity of Various Lewis Acids for the Fluorination of Trichloromethoxy-Benzene by HF in Liquid Phase, J. Fluor. Chem., 2004, 125, p 1947. K.O. Christe, Chemical Synthesis of Elemental Fluorine, Inorg. Chem., 1986, 25(21), p 3722–3724. L.H. Gong and W. Zhu, Corrosion Failure Analysis of a Perforated F32 Reactor, Mater. Test., 2019, 61(6), p 533–536. S. Brunet, Examples of Catalytic and Selective Routes for Fluorinated Building Blocks, Org. Process Res. Dev., 2014, 18(8), p 1067–1071. H.D. Quan, H.E. Yang, M. Tamura, and A. Sekiya, SbF5/PAF—A Novel Fluorinating Reagent in Preparing Fluorine Compounds, J. Fluor. Chem., 2004, 125, p 1169–1172. E. Meissner and E. Milchert, Kinetics of Tetrachloromethane Fluorination by Hydrogen Fluoride in the Presence of Antimony Pentachloride, J. Fluor. Chem., 2003, 119(1), p 89–95. S.D. Santacesaria, Basile, Carra, Kinetics of Chloroform Fluorination by HF Catalyzed by Antimony Pentachloride, J. Fluor. Chem., 1989, 44(1), p 87–111. N. Maruyama, D. Mori, S. Hiromoto, K. Kanazawa, and M. Nakamura, Fatigue Strength of 316L-Type Stainless Steel in Simulated Body Fluids, Corros. Sci., 2011, 53(6), p 2222–2227. R.M. Kain, Crevice Corrosion Behavior of Stainless Steel in Seawater and Related Environments, Corrosion, 1984, 40, p 313–321. A.S. Fouda, G.Y. El-Ewady, and S. Fathy, Role of Some Pyrazol-5-One Derivatives as Corrosion Inhibitors for 316L Stainless Steel in 1 M HCl, Desalin. Water Treat., 2013, 51, p 2202–2213. Z.H. Jin, H.H. Ge, W.W. Lin, Y.W. Zong, S.J. Liu, and J.M. Shi, Corrosion Behaviour of 316L Stainless Steel and Anti-Corrosion Materials in a High Acidified Chloride Solution, Appl. Surf. Sci., 2014, 322(15), p 47–56. G. Faita, F. Mazza, and G. Bianchi, Role of Water and Ionic Solvation in Localized Corrosion Phenomena, NACE Houston, 1974, 2974, p 34–44. J.L. Trompette, The Comparative Breakdown of Passivity of Tin by Fluorides and Chlorides Interpreted through the “Law of Matching Affinities” Concept, Corros. Sci., 2015, 94(may), p 288–293. S.B. Basame and H.S. White, Pitting Corrosion of Titanium the Relationship Between Pitting Potential and Competitive Anion Adsorption at the Oxide Film/Electrolyte Interface, J. Electrochem. Soc., 2000, 147(4), p 1376. A. Pardo, E. Otero, M.C. Merino, M.D. Lopez, and M.V. Utrilla, Pitting and Crevice Corrosion Behaviour of High Alloy Stainless Steels in Chloride-Fluoride Solutions, Mat. Corros., 2000, 51, p 850–858. M.A. Rodríguez, R.M. Carranza, and R.B. Rebak, Influence of Halide Ions and Alloy Microstructure on the Passive and Localized Corrosion Behavior of Alloy 22, Metall. Mater. Trans. A, 2005, 36, p 1179–1185. S. Pahlavan, S. Moazen, I. Taji, K. Saffar, M. Hamrah, M.H. Moayed, and S.M. Beidokhti, Pitting Corrosion of Martensitic Stainless Steel in Halide Bearing Solutions, Corros. Sci., 2016, 112, p 233–240. A.V. Rodrigues, N.T. Oliveira, M.L. Santos, and A.C. Guastaldi, Electrochemical Behavior and Corrosion Resistance of Ti-15Mo Alloy in Naturally-Aerated Solutions, Containing Chloride and Fluoride Ions, J. Mater. Sci. Mater. Med., 2015, 26(1), p 5323. X. Li, J. Wang, E.H. Han, and W. Ke, Influence of Fluoride and Chloride on Corrosion Behavior of NiTi Orthodontic Wires, Acta Biomater., 2007, 3(5), p 807–815. J.P. Gomes and E.J. Kassab, Assessment of Nickel Titanium and Beta Titanium Corrosion Resistance Behavior in Fluoride and Chloride Environments, Angle Orthod., 2013, 83(5), p 864–869. J.M. Bastidas, C. Fosca, B. Chico, and E. Otero, Weight Loss and Electrochemical Results for Two Super-Austenitic Stainless Steels in Chloride-Fluoride Mixtures, Corros. Sci., 1996, 38, p 559–563. F.C. Full, Effect of Delta Ferrite on the Hot Cracking of Stainless Steel, Weld. J., 1967, 46(9), p 399s–409s. R. Jiang, G. Zou, W. Shi, Y. Liang, and S. Xiang, Corrosion Behavior of Plasma-Nitrided 904L Austenitic Stainless Steel in Hydrofluoric Acid, J. Mater. Eng. Perform., 2019, 28(3), p 1863–1872. K. Oh, S. Ahn, K. Eom, and H. Kwon, A Study on the Localized Corrosion and Repassivation Kinetics of Fe-20Cr-xNi (x=0-20 wt.%) Stainless Steels via Electrochemical Analysis, Corros. Sci., 2015, 100, p 158–168. L. Wang, A. Seyeux, and P. Marcus, Thermal Stability of the Passive Film Formed on 316L Stainless Steel Surface Studied by ToF-SIMS, Corros. Sci., 2020, 165, p 108395. B. Maa, A. Xw, C. Kf, A. Iow, and A. Yh, Corrosion and Metal Release Investigations of Selective Laser Melted 316L Stainless Steel in a Synthetic Physiological Fluid Containing Proteins and in Diluted Hydrochloric Acid, Electrochim. Acta, 2020, 354, p 136748. L. Wegrelius, F. Falkenberg, and I. Olefjord, Passivation of Stainless Steels in Hydrochloric Acid, J. Electrochem. Soc., 1999, 146(4), p 1937–1406. W. Fredriksson and K. Edstrrom, XPS Study of Duplex Stainless Steel as a Possible Current Collector in a Li-Ion Battery, Electrochim. Acta, 2012, 79(30), p 82–94. http://srdata.nist.gov/xps. Accessed March 2022. Z. Wang, C. Carrière, A. Seyeux, S. Zanna, D. Mercier, and P. Marcus, Thermal Stability of Surface Oxides on Nickel Alloys (NiCr and NiCrMo) Investigated by XPS and ToF-SIMS, Corros. Sci., 2022, 576, p 151836. C.R. Clayton and Y.C. Lu, A Bipolar Model of the Passivity of Stainless Steels. III: The Mechanism of MoO42 Formation and Incorporation, Corros. Sci., 1989, 29(7), p 881–898. J.D. Henderson, X. Li, F.P. Filice, D. Zagidulin, M.C. Biesinger, B. Kobe, D.W. Shoesmith, K. Ogle, and J.J. Nol, Investigating the Role of Mo and Cr during the Activation and Passivation of Ni-based Alloys in Acidic Chloride Solution, J. Electrochem. Soc., 2021, 168(2), p 021509. G. Yang, F. Hui, W. Xu, and X.P. Qu, in International Conference on Planarization/cmp Technology, 2015. T. Hanawa, S. Hiromoto, and K. Asami, Characterization of the Surface Oxide film of a Co-Cr-Mo Alloy after Being Located in Quasi-Biological Environments using XPS, Appl. Surf. Sci., 2001, 183(1–2), p 68–75. A. Katrib, A. Benadda, J.W. Sobczak, and G. Maire, XPS and Catalytic Properties of the Bifunctional Supported MoO2(Hx)ac on TiO2 for the Hydroisomerization Reactions of Hexanes and 1-Hexene, Appl. Catal. A Gen., 2003, 242(1), p 31–40. C. Rnek, K. Davut, M. Kocaba, A. Bayatli, and M. Urgen, Understanding Corrosion Morphology of Duplex Stainless Steel wire in Chloride Electrolyte, Corros. Mater. Degrad., 2021, 2(3), p 397–411. S. Aoki, H. Yakuwa, K. Mitsuhashi, and J. Sakai, Dissolution Behavior of α and γ Phases of a Duplex Stainless Steel in a Simulated Crevice Solution, J. Electrochem. Soc., 2010, 25(37), p 17–22. C. Ornek, J. Walton, T. Hashimoto, T.L. Ladwein, S.B. Lyon, and D.L. Engelberg, Characterization of 475 °C Embrittlement of Duplex Stainless Steel Microstructure via Scanning Kelvin Probe Force Microscopy and Magnetic Force Microscopy, J. Electrochem. Soc., 2017, 164(6), p 208–217. C. Rnek and D.L. Engelberg, SKPFM Measured Volta Potential Correlated with Strain Localisation in Microstructure to Understand Corrosion Susceptibility of Cold-Rolled Grade 2205 Duplex Stainless Steel, Corros. Sci., 2015, 99, p 164–171. C. Rnek and D.L. Engelberg, Correlative EBSD and SKPFM Characterisation of Microstructure Development to Assist Determination of Corrosion Propensity in Grade 2205 Duplex Stainless Steel, J. Mater. Sci., 2016, 51(4), p 1931–1948. C. Örnek, F. Léonard, S.A. Mcdonald, A. Prajapati, and D.L. Engelberg, Time-Dependent in situ Measurement of Atmospheric Corrosion Rates of Duplex Stainless Steel Wires, Npj Mater. Degrad., 2018 https://doi.org/10.1038/s41529-018-0030-9 C. Rnek and D.L. Engelberg, Towards Understanding the Effect of Deformation Mode on Stress Corrosion Cracking Susceptibility of Grade 2205 Duplex Stainless Steel, Mater. Sci. Eng. A, 2016, 666, p 269–279. M. Zhu, Q. Zhang, Y. Yuan, S. Guo, and Y. Huang, Study on the Correlation Between Passive Film and AC Corrosion Behavior of 2507 Super Duplex Stainless Steel in Simulated Marine Environment, J. Electroanal. Chem., 2020, 864, p 114072. H. Tian, X. Cheng, Y. Wang, C. Dong, and X. Li, Effect of Mo on Interaction Between α/γ Phases of Duplex Stainless Steel, Electrochim. Acta, 2018, 267, p 255–268. J. Ritter, In Surface and Materials Engineering, Corrosion Laboratory, Aalen University of Applied Sciences, Aalen, Germany, 2013. I.H. Lo, Y. Fu, C.J. Lin, and W.T. Tsai, Effect of Electrolyte Composition on the Active-to-Passive Transition Behavior of 2205 Duplex Stainless Steel in H2SO4/HCl Solution, Corros. Sci., 2006, 48, p 696–708. J.S. Lee, K. Fushimi, T. Nakanishi, Y. Hasegawa, and Y.S. Park, Corrosion Behaviour of Ferrite and Austenite Phases on Super Duplex Stainless Steel in a Modified Green-Death Solution, Corros. Sci., 2014, 89, p 111–117. F. Lequien and G. Moine, Corrosion of a 316L Stainless Steel in a Gaseous Environment Polluted with HCl: Mechanism, Mater. Corros., 2020, 72(3), p 483–494. A. Kocijan, D.K. Merl, and M. Jenko, The Corrosion Behaviour of Austenitic and Duplex Stainless Steels in Artificial Saliva with the Addition of Fluoride, Corros. Sci., 2011, 53(2), p 776–783. Y. Yang, L. Guo, and H. Liu, Influence of Fluoride Ions on Corrosion Performance of 316L Stainless Steel as Bipolar Plate Material in Simulated PEMFC Anode Environments, Int. J. Hydrog. Energy, 2012, 37(2), p 1875–1883.