Effect of Cavitation and Temperature on Fluid Film Bearing Using CFD and FSI Technique: A Review

Kalbande PD, Dhande DY, Pande DW (2016) CFD analysis of carbon fiber reinforced polytetrafluoroethylene (PTFE) hydrodynamic journal bearing using optimization technique. Int Conf Autom Control Dyn Optim Tech. https://doi.org/10.1109/ICACDOT.2016.7877662 Lin X, Jiang S, Zhang C, Liu X (2018) Thermohydrodynamic analysis of high speed water-lubricated spiral groove thrust bearing considering effects of cavitation, inertia and turbulence. Tribol Int 119:645–658. https://doi.org/10.1016/j.triboint.2017.11.037 Szeri AZ (1999) Fluid film lubrication: theory and design. Choice Rev Online 36:5720. https://doi.org/10.5860/choice.36-5720 Tower B (1983) First report on friction experiments. Proc Inst Mech Eng 34:63–93. https://doi.org/10.1243/PIME_PROC_1883_034_028_02 He J (1998) Use of computational fluid dynamics in hydrodynamic lubrication. Proc Inst Mech Eng 212:427 Degroote J, Bathe KJ, Vierendeels J (2009) Performance of a new partitioned procedure versus a monolithic procedure in fluid-structure interaction. Comput Struct 87:793–801. https://doi.org/10.1016/j.compstruc.2008.11.013 Meruane V, Pascual R (2008) Identification of nonlinear dynamic coefficients in plain journal bearings. Tribol Int 41:743–754. https://doi.org/10.1016/j.triboint.2008.01.002 Bouyer J, Fillon M (2004) On the significance of thermal and deformation effects on a plain journal bearing subjected to severe operating conditions. J Tribol 126:819–822. https://doi.org/10.1115/1.1792678 Yiping H, Darong C, Xianmei K, Jiadao W (2002) Model of fluid-structure interaction and its application to elastohydrodynamic lubrication. Comput Methods Appl Mech Eng 191:4231–4240. https://doi.org/10.1016/S0045-7825(02)00376-6 Shenoy BS, Pai RS, Rao DS, Pai R (2010) Elasto-hydrodynamic lubrication analysis of full 360° journal bearing using CFD and FSI techniques. World J Model Simul 6:315–320 Gertzos KP, Nikolakopoulos PG, Papadopoulos CA (2008) CFD analysis of journal bearing hydrodynamic lubrication by Bingham lubricant. Tribol Int 41:1190–1204. https://doi.org/10.1016/j.triboint.2008.03.002 Raimondi AA, Boyd J (1958) A solution for the finite journal bearing and its application to analysis and design: Iii. ASLE Trans 1:194–209. https://doi.org/10.1080/05698195808972330 Wada S, Hayashi H, Haga K (1974) Behavior of a Bingham solid in hydrodynamic lubrication: part 3, application to journal bearing. Bull JSME 17:1182–1191. https://doi.org/10.1299/jsme1958.17.1182 Bompos DA, Nikolakopoulos PG (2011) CFD simulation of magnetorheological fluid journal bearings. Simul Model Pract Theory 19:1035–1060. https://doi.org/10.1016/j.simpat.2011.01.001 Forte P, Paternò M, Rustighi E (2004) A magnetorheological fluid damper for rotor applications. Int J Rotating Mach 10:546845. https://doi.org/10.1155/S1023621X04000181 Holmberg K, Erdemir A (2017) Influence of tribology on global energy consumption, costs and emissions. Friction 5:263–284. https://doi.org/10.1007/s40544-017-0183-5 Bouzidane A, Thomas M (2008) An electrorheological hydrostatic journal bearing for controlling rotor vibration. Comput Struct 86:463–472. https://doi.org/10.1016/j.compstruc.2007.02.006 Christidi-Loumpasefski OO, Tzifas I, Nikolakopoulos PG, Papadopoulos CA (2017) Dynamic analysis of rotor–bearing systems lubricated with electrorheological fluids. Proc Inst Mech Eng Part K J Multi-body Dyn 232:153–168. https://doi.org/10.1177/1464419317725932 Urreta H, Leicht Z, Sanchez A et al (2009) Hydrodynamic bearing lubricated with magnetic fluids. J Phys Conf Ser 149:012113. https://doi.org/10.1088/1742-6596/149/1/012113 Bompos DA, Nikolakopoulos PG (2016) Rotordynamic analysis of a shaft using magnetorheological and nanomagnetorheological fluid journal bearings. Tribol Trans 59:108–118. https://doi.org/10.1080/10402004.2015.1050137 DuBois GB, Ocvirk FW (1953) Analytical derivation and experimental evaluation of short-bearing approximation for full journal bearings Liu H, Xu H, Ellison PJ, Jin Z (2010) Application of computational fluid dynamics and fluid-structure interaction method to the lubrication study of a rotor-bearing system. Tribol Lett 38:325–336. https://doi.org/10.1007/s11249-010-9612-6 Liu H, Xu H, Jin Z, Ellison P (2010) Lubrication analysis of journal bearing and rotor system using CFD and FSI techniques. In: Luo J, Meng Y, Shao T, Zhao Q (eds) Advanced tribology. Springer, Berlin, Heidelberg, pp 40–41 C. P, (1965) A linearized turbulent lubrication theory. J Basic Eng Ser D 87:675 Shenoy BS, Pai R (2009) Steady state performance characteristics of single pad externally adjustable fluid film bearing in the laminar and turbulent regimes. J Tribol 131:021701. https://doi.org/10.1115/1.3070580 Elrod HG Jr, Ng CW (1967) A theory for turbulent fluid films and its application to bearings. J Lubr Technol 89:346–362. https://doi.org/10.1115/1.3616989 Hemmati F, Miraskari M, Gadala MS (2017) Dynamic analysis of short and long journal bearings in laminar and turbulent regimes, application in critical shaft stiffness determination. Appl Math Model 48:451–475. https://doi.org/10.1016/j.apm.2017.04.013 Szeri AZ (1998) Fluid film lubrication: theory and design. Cambridge University Press, Cambridge Constantinescu V (1959) On turbulent lubrication. Proc Inst Mech Eng 173:881 Manshoor B, Jaat M, Izzuddin Z, Amir K (2013) CFD analysis of thin film lubricated journal bearing. Procedia Eng 68:56–62. https://doi.org/10.1016/j.proeng.2013.12.147 Helene M, Arghir M, Frene J (2003) Numerical study of the pressure pattern in a two-dimensional hybrid journal bearing recess, laminar, and turbulent flow results. J Tribol 125:283–290. https://doi.org/10.1115/1.1537233 Shenoy SB, Pai R (2009) Theoretical investigations on the performance of an externally adjustable fluid-film bearing including misalignment and turbulence effects. Tribol Int 42:1088–1100. https://doi.org/10.1016/j.triboint.2009.03.008 Armentrout RW, He M, Haykin T, Reed AE (2017) Analysis of turbulence and convective inertia in a water-lubricated tilting-pad journal bearing using conventional and CFD approaches. Tribol Trans 60:1129–1147. https://doi.org/10.1080/10402004.2016.1251668 Braun MJ, Hannon WM (2010) Cavitation formation and modelling for fluid film bearings: a review. Proc Inst Mech Eng Part J J Eng Tribol 224:839–863. https://doi.org/10.1243/13506501JET772 Hirani H (2016) Fundamentals of engineering tribology with applications. Cambridge University Press, Cambridge Franc JP (2007) The rayleigh-plesset equation: a simple and powerful tool to understand various aspects of cavitation. In: d’Agostino L, Salvetti MV (eds) CISM international centre for mechanical sciences, courses and lectures. Springer Vienna, Vienna, pp 1–41 Brennen CE (2013) Cavitation and bubble dynamics. Cambridge University Press, Cambridge Wang LL, Lu CH, Ge PQ (2014) Theoretical and experimental study on the cavitation mechanism of a low viscosity spiral oil wedge journal bearing. Proc Inst Mech Eng Part J J Eng Tribol 228:947–954. https://doi.org/10.1177/1350650114522020 Geller M, Schemmann C, Kluck N (2014) Simulation of radial journal bearings using the FSI approach and a multi-phase model with integrated cavitation. Prog Comput Fluid Dyn An Int J 14:14. https://doi.org/10.1504/pcfd.2014.059196 Jones MH, Jones D (1983) Industrial tribology. The practical aspects of friction, lubrication and wear. Tzanakis I, Bolzoni L, Eskin DG, Hadfield M (2017) Evaluation of cavitation erosion behavior of commercial steel grades used in the design of fluid machinery. Metall Mater Trans A 48:2193–2206. https://doi.org/10.1007/s11661-017-4004-2 Sommerfeld A (1904) Zur hydrodynamischen theorie der SchmiermitteIreiburg. Z Angew Math Phys 50:97–155 Guo Z, Hirano T, Kirk RG (2005) Application of CFD analysis for rotating machinery—Part I: hydrodynamic, hydrostatic bearings and squeeze film damper. J Eng Gas Turbines Power 127:445–451. https://doi.org/10.1115/1.1807415 Hirano T, Guo Z, Kirk RG (2005) Application of computational fluid dynamics analysis for rotating machinery—Part II: Labyrinth seal analysis. J Eng Gas Turbines Power 127:820–826. https://doi.org/10.1115/1.1808426 SWIFT HW (1932) The stability of lubricating films in journal bearings. (includes appendix). Minutes Proc Inst Civ Eng 233:267–288. https://doi.org/10.1680/imotp.1932.13239 Stieber W (1933) Das schwimmlager: Hydrodynamische Theorie des Gleitlagers. VDI Verlag GMBH, Berlin, p 106 Jakobsson, B., Floberg L (1957) The finite journal bearing considering vaporization. Trans Chalmers Univ Technol 190: Olsson KO (1965) Cavitation in dynamically loaded bearings. Trans Chalmers Univ Technol Floberg L (1974) Cavitation boundary conditions with regard to the number of streamers and tensile strength of the liquid. In: Proc 1st leeds–lyon symp tribol held inst tribol dep mech eng univ leeds, England, pp 31–35 Elrod HG (1981) A cavitation algorithm. J Lubr Technol 103:350–354 Vijayaraghavan D, Keith TG (1989) Development and evaluation of a cavitation algorithm. Tribol Trans 32:225–233. https://doi.org/10.1080/10402008908981882 Booker JF (1988) Classic cavitation models for finite element analysis. Curr Res cavitating fluid Film 15:39–40 A. Kumar JFB, (1991) A finite element cavitation algorithm. J Tribol 113:276–284 Boedo S, Booker JF (1995) Cavitation in normal separation of square and circular plates. J Tribol 117:403–409 Miranda G (2016) The detection of journal bearing cavitation with use of ultrasound technology Sun DC, Brewe DE (1991) A high speed photography study of cavitation in a dynamically loaded journal bearing. J Tribol 113:287–293. https://doi.org/10.1115/1.2920618 Poddar S, Tandon N (2016) Detection of journal bearing vapour cavitation using vibration and acoustic emission techniques with the aid of oil film photography. Tribol Int 103:95–101. https://doi.org/10.1016/j.triboint.2016.06.039 Coutier-Delgosha O, Fortes-Patella R, Reboud JL et al (2004) Experimental and numerical studies in a centrifugal pump with two-dimensional curved blades in cavitating condition. J Fluids Eng 125:970–978. https://doi.org/10.1115/1.1596238 Takenaka N, Kadowaki T, Kawabata Y et al (2005) Visualization of cavitation phenomena in a Diesel engine fuel injection nozzle by neutron radiography. Nucl Instruments Methods Phys Res Sect A Accel Spectrometers, Detect Assoc Equip 542:129–133. https://doi.org/10.1016/j.nima.2005.01.089 Lin Q, Wei Z, Wang N, Chen W (2013) Analysis on the lubrication performances of journal bearing system using computational fluid dynamics and fluid-structure interaction considering thermal influence and cavitation. Tribol Int 64:8–15. https://doi.org/10.1016/j.triboint.2013.03.001 Geller M, Schemmann C, Kluck N (2014) Simulation of radial journal bearings using the FSI approach and a multi-phase model with integrated cavitation. Prog Comput Fluid Dyn 14:14–23. https://doi.org/10.1504/PCFD.2014.059196 Wang Y, Yin Z, Jiang D et al (2016) Study of the lubrication performance of water-lubricated journal bearings with CFD and FSI method. Ind Lubr Tribol 68:341–348. https://doi.org/10.1108/ILT-04-2015-0053 Wodtke M, Olszewski A, Wasilczuk M (2013) Application of the fluid-structure interaction technique for the analysis of hydrodynamic lubrication problems. Proc Inst Mech Eng Part J J Eng Tribol 227:888–897. https://doi.org/10.1177/1350650113481147 Gao G, Yin Z, Jiang D, Zhang X (2014) Numerical analysis of plain journal bearing under hydrodynamic lubrication by water. Tribol Int 75:31–38. https://doi.org/10.1016/j.triboint.2014.03.009 Dhande DY, Pande DW (2018) Multiphase flow analysis of hydrodynamic journal bearing using CFD coupled Fluid Structure Interaction considering cavitation. J King Saud Univ - Eng Sci 30:345–354. https://doi.org/10.1016/j.jksues.2016.09.001 Dhande DY, Pande DW (2017) A two-way FSI analysis of multiphase flow in hydrodynamic journal bearing with cavitation. J Brazilian Soc Mech Sci Eng 39:3399–3412. https://doi.org/10.1007/s40430-017-0750-8 Gao G, Yin Z, Jiang D et al (2016) Analysis on design parameters of water-lubricated journal bearings under hydrodynamic lubrication. Proc Inst Mech Eng Part J J Eng Tribol 230:1019–1029. https://doi.org/10.1177/1350650115623201 Zhang X, Yin Z, Gao G, Li Z (2015) Determination of stiffness coefficients of hydrodynamic water-lubricated plain journal bearings. Tribol Int 85:37–47. https://doi.org/10.1016/j.triboint.2014.12.019 Concli F (2016) Pressure distribution in small hydrodynamic journal bearings considering cavitation: a numerical approach based on the open-source CFD code OpenFOAM®. Lubr Sci 28:329–347. https://doi.org/10.1002/ls.1334 Li Q, Liu SL, Pan XH, Zheng SY (2012) A new method for studying the 3D transient flow of misaligned journal bearings in flexible rotor-bearing systems. J Zhejiang Univ Sci A 13:293–310. https://doi.org/10.1631/jzus.A1100228 Li Q, Yu G, Liu S, Zheng S (2012) Application of computational fluid dynamics and fluid structure interaction techniques for calculating the 3D transient flow of journal bearings coupled with rotor systems. Chinese J Mech Eng (English Ed) 25:926–932. https://doi.org/10.3901/CJME.2012.05.926 Deligant M, Podevin P, Descombes G (2011) CFD model for turbocharger journal bearing performances. Appl Therm Eng 31:811–819. https://doi.org/10.1016/j.applthermaleng.2010.10.030 Singhal AK, Athavale MM, Li H, Jiang Y (2002) Mathematical basis and validation of the full cavitation model. J Fluids Eng Trans ASME 124:617–624. https://doi.org/10.1115/1.1486223 Zhang Z (1986) Theories of hydrodynamic lubrication of sliding bearings. Higher Education press, Beijing Constantinescu VN, Nica A, Pascovici M et al (1981) Lagare Cu alunecare (sliding bearings). J Lubr Technol 103:319–319. https://doi.org/10.1115/1.3251661 Hamrock BJ, Schmid SR, Jacobson BO (2004) Fundamentals of Fluid Film Lubrication. CRC Press Hughes WF, Osterle F (1958) Temperature effects in journal bearing lubrication. ASLE Trans 1:210–212. https://doi.org/10.1080/05698195808972331 Stachowiak G, Batchelor W (2014) Engineering Tribology. Butterworth-Heinemann, pp 509–523 Khonsari MM, Wang SH (1991) On the fluid-solid interaction in reference to thermoelastohydrodpamic analysis of journal bearings. J Tribol 113:398–404. https://doi.org/10.1115/1.2920635 Knežević D, Savić V (2006) Mathematical modeling of changing of dynamic viscosity, as a function of temperature and pressure, of mineral oils for hydraulic systems. Facta Univ Ser -Mechanical Eng 4:27–34 Singla A, Kumar A, Bala S et al (2014) (2014) Thermo-hydrodynamic analysis on temperature profile of circular journal bearing using computational fluid dynamics. Recent Adv Eng Comput Sci RAECS 2014:1–6. https://doi.org/10.1109/RAECS.2014.6799595 Wang B, Ding Q, Yang T (2019) Soft rotor and gas bearing system: two-way coupled fluid-structure interaction. J Sound Vib 445:29–43. https://doi.org/10.1016/j.jsv.2019.01.007 Chen Y, Sun Y, He Q, Feng J (2019) Elastohydrodynamic behavior analysis of journal bearing using fluid-structure interaction considering cavitation. Arab J Sci Eng 44:1305–1320. https://doi.org/10.1007/s13369-018-3467-9 Zhao Y, Wei C, Yuan S, Hu J (2016) Theoretical and experimental study of cavitation effects on the dynamic characteristic of spiral-groove rotary seals (SGRSs). Tribol Lett 64:50. https://doi.org/10.1007/s11249-016-0784-6 Kasolang S, Ahmad MA, Joyce RD, Tai CFM (2012) Preliminary study of pressure profile in hydrodynamic lubrication journal bearing. Procedia Eng 41:1743–1749. https://doi.org/10.1016/j.proeng.2012.07.377 Dong Q, Yin Z, Li H et al (2020) Simulation and experimental verification of fatigue strength evaluation of journal bearing bush. Eng Fail Anal 109:10ss4275. https://doi.org/10.1016/j.engfailanal.2019.104275 Dowson D, Taylor CM, Bearings CIN et al (1979) Cavitation in bearings. Annu Rev Fluid Mech 11:35–66