Effect of Calcium Microalloying on the Service and Corrosion Properties of V1341 Alloy Sheets
Tóm tắt
The influence of calcium microalloying on the texture of aluminum Al–Mg–Li and Al–Mg–Si–Cu alloys is studied. The paper considers the mechanical properties at static and dynamic loads, the fatigue characteristics, the crack resistance, and the high-temperature strength of V1341 alloy sheets with a regulated recrystallized structure in state T1. The properties of the sheets are also determined after long-term heating at 100–150°C for 10–1000 h. The results of service and corrosion tests of the sheets are presented.
Tài liệu tham khảo
O. E. Grushko, B. V. Ovsyannikov, and V. V. Ovchinnikov, Aluminum-Lithium Alloys: Metallurgy, Welding, Materials Science (Nauka, Moscow, 2014).
O. E. Grushko, L. M. Sheveleva, I. P. Zhegina, and S. T. Basyuk, “Effect of impurities of alkali and alkali-earth metals on the structure and properties of 1420 alloy,” in Voprosy Aviat. Nauki Tekhn. (VIAM, Moscow, 1988), Vol. 2, pp. 10–19.
I. N. Fridlyander, V. V. Berstenev, E. A. Tkachenko, et al., “Effect of heat treatment and deformation on the grain size and mechanical properties of duralumin-type alloys,” Materialoved. Term. Obrab. Met, No. 7, 3–6 (2003).
M. A. Gureeva, O. E. Grushko, V. V. Ovchinnikov, and V. F. Shamrai, “Enhancement of formability of sheets of Al–Mg–Si alloys used at cold stamping,” Kuzn.-Shtampov. Proizv. Obrab. Met. Davleniem, No. 4, 20–27 (2007).
I. N. Fridlyander, O. E. Grushko, L. M. Sheveleva, and S. F. Danilov, “Properties of sheets of high-technological V1341 alloy,” Materialoved. Term. Obrab. Met., No. 12, 3–6 (2004).
O. E. Grushko, V. V. Ovchinnikov, V. V. Alekseev, M. A. Gureeva, V. F. Shamrai, and G. G. Klochkov, “Structure, spinning ability, and weldability of sheets of ‘Avial’ alloy alloyed with calcium,” Materialoved. Term. Obrab. Met., No. 7, 15–22 (2007).
V. V. Ovchinnikov, A. M. Drits, M. A. Gureeva, D. V. Malov, and R. N. Rastopchin, “Mechanical properties of welds of 1565ch alloy sheets at low temperatures,” Elektrometallurgiya, No. 6, 2–9 (2016).
V. N. Scopinskii, V. V. Ovchinnikov, and A. B. Smetankin, “Fracture of sheet specimens of aluminum 1565ch alloy during tensile tests,” Elektrometallurgiya, No. 5, 31–37 (2017).