Nội dung được dịch bởi AI, chỉ mang tính chất tham khảo
Ảnh hưởng của việc điều trị bằng laser CO2 đến bề mặt cotton
Tóm tắt
Trong nghiên cứu này, laser CO2 đã được sử dụng để điều trị vải cotton nhằm tạo ra các hiệu ứng bề mặt, được phát hiện là thay đổi tùy thuộc vào các tham số quy trình laser, tức là độ phân giải và thời gian pixel. Các độ phân giải được sử dụng là 40, 50 và 60 dpi, trong khi thời gian pixel là 100, 110 và 120 μs. Cả các tính chất vật lý và hóa học ở bề mặt của các loại vải được điều trị với các kết hợp khác nhau của độ phân giải và thời gian pixel đã được phân tích bằng Kính hiển vi điện tử quét (SEM), Phổ hồng ngoại biến đổi Fourier với phương pháp phản xạ toàn phần suy giảm (FTIR-ATR), và Phổ quang điện tử X (XPS). Điều tra bằng SEM tiết lộ sự xuất hiện của nhiều lỗ, nứt và mảnh vỡ có trên bề mặt sợi sau khi điều trị bằng laser. Phổ FTIR-ATR cho thấy rằng vải cotton được điều trị bằng laser đã trải qua các thay đổi về cấu trúc hóa học với nhóm kéo dài hydroxyl (–OH) bị oxy hóa thành các nhóm carbonyl/axit cacboxylic. Phân tích XPS cho thấy sự thay đổi trong thành phần nguyên tố ở bề mặt sau khi điều trị bằng laser. Hơn nữa, tính chất thấm hút của các loại vải cotton được điều trị bằng laser đã được đánh giá.
Từ khóa
#laser CO2 #vải cotton #thuộc tính bề mặt #SEM #FTIR-ATR #XPSTài liệu tham khảo
Alonso H, Esteves F (2007) Effect of CO2 laser radiation on surface properties of synthetic fibres. Res J Text Appar 11(3):42–47
Dadbin S (2002) Surface modification of LDPE film by CO2 pulsed laser irradiation. Eur Polym J 38:2489–2495
Dadsetan M, Mirzadeh H, Sharifi N (1999) Effect of CO2 laser irradiation on the surface properties of polyethylene terephthalate. Radiat Phys Chem 56:597–604
Dascalu T, Acosta-Ortiz SE, Ortiz-Morates M, Compean I (2000) Removal of the indigo color by laser beam-denim interaction. Optics Laser Technol 34:179–189
De Bore JJ (1980) The wettability of scoured and dried cotton fabrics. Text Res J 50(10):624–631
Ferrero F, Testore F, Innocenti R, Tonin C (2002) Surface degradation of linen textiles induced by laser treatment: comparison with electron beam and heat source. AUTEX Res J 12(3):109–114
Gotoh K, Hayashiya M (2008) Improvement of serviceability properties of synthetic textile fabrics using 172 nm ultraviolet excimer lamp. Text Res J 78(1):37–44
Hsieh YL (1995) Liquid transport in fabric structures. Text Res J 65(5):299–307
Kan CW, Yuen CWM, Cheng CW (2010) A technical study of the effect of CO2 laser surface engraving on some colour properties of denim fabric. Color Technol 126:365–371
Knittel D, Schollmeyer E (1998) Surface structuring of synthetic fibres by UV laser irradiation. Part 3: surface functionality changes resulting from excimer-laser irradiation. Polym Int 45:103–109
Knittel D, Kesting W, Schollmeyer E (1997) Surface structuring of synthetic fibres by UV laser irradiation, Part 2: mechanism and models. Polym Int 43:240–250
Kohara N, Nakayama E, Toyoda H (1993) Photodegradation of linen by sunlight. In: Kennedy JF, Phillips GO, Williams PA (eds) Cellulosics. Pulp, fibre, and environmental aspects. E. Horwood, New York, pp 323–328
Liang SH, Zhou X, Tu TM, Xing ZQ, Lou QH (2003) UV-laser treatment of PET fabrics: changes in fibre structure and dyeing behaviour. Color Technol 119:19–23
Malek RMA, Holme I (2003) The effect of plasma treatment on some properties of cotton. Iran Polymer J 12(4):271–280
Ortiz-Morales M, Poterasu M, Acosta-Ortiz SE, Compean I, Hernandex-Alvarado MR (2003) A comparison between characteristics of various laser-based denim fading processes. Optics Laser Technol 39:15–24
Patnaik A, Rengasamy RS, Kothari VK, Ghosh A (2006) Wetting and wicking in fibrous materials. Text Progr 38(1):1–105
Peng S, Gao Z, Sun J, Yao L, Qiu Y (2009) Influence of argon/oxygen atmospheric dielectric barrier discharge treatment on desizing and scouring of poly (vinyl alcohol) on cotton fabrics. Appl Surf Sci 255:9458–9462
Strlic M, Kolar J, Marincek M (2002) Surface modification during Nd:YAG (1064 nm) pulsed laser cleaning of organic fibrous materials. Appl Surf Sci 207:236–245
Tarhan M, Sariisik M (2009) A comparison among performance characteristics of various denim processes. Text Res J 79(4):301–309
Wijayathunga VN, Lawrence CA, Blackburn RS, Bandara MPU, Lewis ELV, El-Dessouky HM, Cheung V (2007) Influence of laser irradiation on the optical and structural properties of poly(ethylene terephthalate) fibres. Optics Laser Technol 39:1301–1309
Wong W, Chan K, Yeung KY (2001) Chemical modification of poly(ethylene terephthalate) induced by laser treatment. Text Res J 71(2):117–120
Wong W, Chan K, Kwok WY, Tsang YM, Lau KS (2003) Surface structuring of poly(ethylene terephthalate) by UV excimer laser. J Mater Process Technol 132:114–118
Yang CQ, Freeman JM (1993) Thermal degradation of cotton cellulose studied by fourier transform infrared-photoacoustic spectroscopy. In: Urban MW, Craver CD (eds) Structure-property relations in polymers: spectroscopy and performance. American Chemical Society, Washington, D.C., pp 693–708