Effect of Al2O3–Cu/water hybrid nanofluid in heat transfer

S.U.S. Choi, Enhancing thermal conductivity of fluids with nanoparticles, in: D.A. Signer, H.P. Wang (Eds.), Developments Applications of Non-Newtonian Flows, FED-vol. 231/MD-vol. 66, ASME, New York, NY, USA, 1995, pp. 99–105.

Masuda, 1993, Alteration of thermal conductivity and viscosity of liquid by dispersing ultra fine particles (dispersion of c-Al2O3, SiO2 and TiO2 ultra fine particles), Netsu Bussei (Japan), 4, 227, 10.2963/jjtp.7.227

Lee, 1999, Measuring thermal conductivity of fluid containing oxide nanoparticles, ASME Journal of Heat Transfer, 121, 280, 10.1115/1.2825978

Eastman, 2001, Anomalously increased effective thermal conductivities of ethylene glycol-based nanofluids containing copper nanoparticles, Applied Physics Letters, 78, 718, 10.1063/1.1341218

Xuan, 2003, Aggregation structure and thermal conductivity of nanofluids, AIChE Journal, 49, 1038, 10.1002/aic.690490420

Pak, 1998, Hydrodynamic and heat transfer study of dispersed fluids with submicron metallic oxide particle, Experimental Heat Transfer, 11, 151, 10.1080/08916159808946559

Xuan, 2003, Investigation on convective heat transfer and flow features of nanofluids, Journal of Heat Transfer, 125, 151, 10.1115/1.1532008

Wen, 2004, Experimental investigation into convective heat transfer of nanofluid at the entrance region under laminar flow conditions, International Journal of Heat and Mass Transfer, 47, 5181, 10.1016/j.ijheatmasstransfer.2004.07.012

Chandrasekar, 2010, Experimental studies on heat transfer and friction factor characteristics of Al2O3/water nanofluid in a circular pipe under laminar flow with wire coil inserts, Experimental Thermal and Fluid Science, 34, 122, 10.1016/j.expthermflusci.2009.10.001

Suresh, 2011, Experimental studies on heat transfer and friction factor characteristics of CuO/water nanofluid under turbulent flow in a helically dimpled tube, Experimental Thermal and Fluid Science, 35, 542, 10.1016/j.expthermflusci.2010.12.008

Yang, 2005, Heat transfer properties of nanoparticle-in-fluid dispersions (nanofluids) in laminar flow, International Journal of Heat and Mass Transfer, 48, 1107, 10.1016/j.ijheatmasstransfer.2004.09.038

Ding, 2006, Heat transfer of aqueous suspensions of carbon nanotubes (CNT nanofluids), International Journal of Heat and Mass Transfer, 49, 240, 10.1016/j.ijheatmasstransfer.2005.07.009

Heris, 2006, Experimental investigation of oxide nanofluids laminar flow convective heat transfer, International Communications in Heat and Mass Transfer, 33, 529, 10.1016/j.icheatmasstransfer.2006.01.005

Duangthongsuk, 2008, Heat transfer enhancement and pressure drop characteristics of TiO2–water nanofluid in a double-tube counter flow heat exchanger, International Journal of Heat and Mass Transfer, 52, 2059, 10.1016/j.ijheatmasstransfer.2008.10.023

Anoop, 2009, Effect of particle size on the convective heat transfer in nanofluid in the developing region, International Journal of Heat and Mass Transfer, 52, 2189, 10.1016/j.ijheatmasstransfer.2007.11.063

Hwang, 2009, Flow and convective heat transfer characteristics of water-based Al2O3 nanofluids in fully developed laminar flow regime, International Journal of Heat and Mass Transfer, 52, 193, 10.1016/j.ijheatmasstransfer.2008.06.032

Jeena, 2001, In-situ formation of Cu–Al2O3 nanoscale composites by chemical routes and studies on their microstructures, Material Science and Engineering, A313, 180, 10.1016/S0921-5093(00)01998-5

Oh, 2001, Fabrication of Cu dispersed Al2O3 nanocomposite using Al2O3/CuO and Al2O3/Cu nitrate mixtures, Scripta mater, 44, 2117, 10.1016/S1359-6462(01)00890-9

Lee, 2008, Effective viscosities and thermal conductivities of aqueous nanofluids containing low volume concentrations of Al2O3 nanoparticles, International Journal of Heat and Mass Transfer, 51, 2651, 10.1016/j.ijheatmasstransfer.2007.10.026

Xuan, 2000, Conceptions for heat transfer correlation of nanofluids, International Journal of Heat and Mass Transfer, 43, 3701, 10.1016/S0017-9310(99)00369-5

Coleman, 1989

ANSI/ASME, 1986, Measurement Uncertainty, PTC 19, 1-1985, 1986.

R.K. Shah, Thermal entry length solutions for the circular tube and parallel plates, in: Proceedings of Third National Heat Mass Transfer Conference, Indian Institute of Technology, Bombay, 1975, p. 1 (Paper No. HMT-11-75).

Chen, 2008, Heat transfer behaviour of aqueous suspensions of titanate nanofluids, Powder Technology, 183, 63, 10.1016/j.powtec.2007.11.014