Dynamic spherical cavity expansion in brittle ceramics

Anderson, 1993, Long rod penetration, target resistance, and hypervelocity impact, Int. J. Impact Engng., 14, 1, 10.1016/0734-743X(93)90004-Q Bishop, 1945, The theory of indentation and hardness tests, Proc. Phys. Soc., 57, 147, 10.1088/0959-5309/57/3/301 Brar, N., Bless, S.J., Rosenberg, Z., 1988. Brittle failure of ceramic rods under dynamic compression. J. de Physique C-C3 (9), 607–612 Cosculleula, A., 1992. Plasticite, Engdommagements, et Ruptures des Alumines Sous Sollicitations Dynamiques Triaxiales: Influence de la Taille des Grains. Thesis, University of Bordeaux I Courant, 1948 Curran, 1993, Micromechanical model for comminution and granular flow of brittle material under high strain rate application to penetration of ceramic targets, Int. J. Impact Engng., 13, 53, 10.1016/0734-743X(93)90108-J Dandekar, D.P., Bartkowski, P., 1993. Shock response of AD995 alumina. In: Schmidt, S.C., et al. (Eds.), High Pressure Science and Technology. A.I.P., 1994. pp. 733–736 Forrestal, 1986, Penetration into dry porous rock, Int. J. Solids Struct., 22, 1485, 10.1016/0020-7683(86)90057-0 Forrestal, 1990, Target strength of ceramic materials for high-velocity penetration, J. Appl. Phys., 67, 3669, 10.1063/1.345322 Forrestal, 1988, Dynamic spherical cavity-expansion in a compressible elastic–plastic solid, J. Appl. Mech., 55, 275, 10.1115/1.3173672 Forrestal, 1997, A spherical cavity-expansion penetration model for concrete targets, Int. J. Solids Struct., 34, 4127, 10.1016/S0020-7683(97)00017-6 Forrestal, 1995, Penetration into ductile metal targets with rigid spherical-nose rods, Int. J. Impact Engng., 16, 699, 10.1016/0734-743X(95)00005-U Goodier, J.N., 1965. On the mechanics of indentation and cratering in solid targets of strain-hardening metal by impact of hard and soft spheres. Proceedings of the Seventh Symposium on Hypervelocity Impact III. AIAA, NY Grady, D.E., 1995. Dynamic properties of ceramic materials. Sandia Report, Sand 94-3266.UC-704 Hopkins, H.G., 1960. Dynamic expansion of spherical cavities in metal. In: Sneddon, I.N., Hill, R. (Eds.), Progress in Solid Mechanics, vol. 1. North-Holland; Amsterdam Rosenberg, 1987, Shear strength of shock-loaded alumina as determined with longitudinal and transverse manganin gauges, J. Appl. Phys., 62, 1120, 10.1063/1.339721 Sairam, S., Clifton R.J., 1994. Pressure-shear impact investigation of dynamic fragmentation and flow of ceramics. Proceedings of ASME Winter Annual Meeting Satapathy, 1996, Calculation of penetration resistance of brittle materials using spherical cavity expansion analysis, Mech. Mater., 23, 323, 10.1016/0167-6636(96)00022-1 Satapathy, 2000, Deep punching PMMA, Experiment. Mech., 40, 31, 10.1007/BF02327545 Satapathy, 2000, Cavity expansion resistance of brittle materials obeying a two-curve pressure-shear behavior, J. Appl. Phys., 88, 4004, 10.1063/1.1288007 Satapathy, S., Bless, S., Ivanov, S.M., 1999. The effects of failure wave on penetration resistance of glass. Proceedings of the 18th International Symposium on Ballistics, San Antonio Simha, C.H., Bless, S.J., Brar, N.S., 1995. Dynamic failure of AD995 alumina. EXPLOMET’95, International Conference on Metallurgical and Material Application of Shock-wave and High-strain-rate Phenomena, EL Paso, TX Strassburger, 1994, Fracture propagation during impact in three types of ceramics, J. de Physique IV C8, 653 Subramanian, R., Bless, S.J., 1995. Penetration of semi-infinite AD995 alumina targets by tungsten long rod penetrators from 1.5 to 3.5 km/s. Int. J. Impact Engng. 17, 807–816 Tate, 1969, Further results in the theory of long rod penetration, J. Mech. Phys. Solids, 17, 141, 10.1016/0022-5096(69)90028-3 Walker, 1995, A time dependent model for long rod penetration, Int. J. Impact. Engng., 16, 19, 10.1016/0734-743X(94)00032-R Wright, 1992, Deep penetration of polycarbonate by a cylindrical punch, Mech. Mat., 13, 277, 10.1016/0167-6636(92)90020-E