Dynamic crack propagation based on loss of hyperbolicity and a new discontinuous enrichment

International Journal for Numerical Methods in Engineering - Tập 58 Số 12 - Trang 1873-1905 - 2003
Ted Belytschko1, Hao Chen1,2, Jingxiao Xu1, Goangseup Zi1
1Department of Mechanical Engineering, Northwestern University, 2145 Sheridan Road, Evanston, IL 60208-3111, U.S.A.
2Livermore Software Technology Corporation, 7374 Las Positas Road, Livermore, CA 94550, U.S.A.

Tóm tắt

AbstractA methodology is developed for switching from a continuum to a discrete discontinuity where the governing partial differential equation loses hyperbolicity. The approach is limited to rate‐independent materials, so that the transition occurs on a set of measure zero. The discrete discontinuity is treated by the extended finite element method (XFEM) whereby arbitrary discontinuities can be incorporated in the model without remeshing. Loss of hyperbolicity is tracked by a hyperbolicity indicator that enables both the crack speed and crack direction to be determined for a given material model. A new method was developed for the case when the discontinuity ends within an element; it facilitates the modelling of crack tips that occur within an element in a dynamic setting. The method is applied to several dynamic crack growth problems including the branching of cracks. Copyright © 2003 John Wiley & Sons, Ltd.

Từ khóa


Tài liệu tham khảo

10.1061/(ASCE)0733-9399(1985)111:3(381)

10.1115/1.3173062

10.1016/0022-5096(94)90003-5

10.1016/0020-7683(95)00255-3

10.1002/(SICI)1097-0207(19990330)44:9<1267::AID-NME486>3.0.CO;2-7

10.1016/0045-7825(88)90180-6

10.1007/BF00372173

10.1002/nme.1620300311

10.1016/S0045-7825(99)00154-1

10.1002/(SICI)1097-0207(19990620)45:5<601::AID-NME598>3.0.CO;2-S

Moes N, 1999, A finite element method for crack growth without remeshing, International Journal for Numerical Methods in Engineering, 46, 133, 10.1002/(SICI)1097-0207(19990910)46:1<131::AID-NME726>3.0.CO;2-J

10.1016/S0168-874X(00)00035-4

10.1002/1097-0207(20010210)50:4<993::AID-NME164>3.0.CO;2-M

10.1002/nme.462

10.1007/s00466-002-0394-z

10.1016/S0022-5096(97)00047-1

10.1002/nme.607

10.1016/S0997-7538(02)01211-1

Belytschko T, 2000, Nonlinear Finite Elements for Continua and Structures

Marsden JE, 1983, Mathematical Foundations of Elasticity

10.1016/0020-7683(95)00257-X

10.1002/(SICI)1097-0207(19961115)39:21<3575::AID-NME65>3.0.CO;2-E

10.1002/nme.777

10.1002/nme.849

Barenblatt G, 1962, The mathematical theory of equilibrium of cracks in brittle fracture, Advances in Applied Fracture, 7, 55

10.1016/0022-5096(60)90013-2

10.1016/0008-8846(76)90007-7

Planas J, 1991, Nonlinear fracture of cohesive materials, International Journal of Fracture, 51, 139, 10.1007/BF00033975

10.1016/S0020-7683(99)00155-9

10.1023/A:1018672922734

10.1002/nme.778

10.1002/(SICI)1097-0207(19960330)39:6<923::AID-NME887>3.0.CO;2-W

10.1115/1.3424305

Kalthoff JF, 1987, Failure mode transition at high rates of shear loading, International Conference on Impact Loading and Dynamic Behavior of Materials, 1, 185

10.1115/1.2888289

Decker RF, 1979, Source Book on Maraging Steels

Liu Y, 1994, Mesh‐dependence and stress singularity in finite element analysis of creep crack growth by continuum damage mechanics approach, European Journal of Mechanics – A/Solids, 13, 395

10.1016/0022-5096(73)90029-X

ChenH.Enriched finite element methods and its applications. Ph.D. Thesis 2003.

LemaitreJ.Evaluation of dissipation and damage in metal submitted to dynamic loading. Proceedings ICM 1 1971.

10.1080/14786445108561302

10.1007/BF00047452

10.1088/0965-0393/1/2/001

Thông tin
Thông tin xuất bản

International Journal for Numerical Methods in Engineering

Tập 58 Số 12

1873-1905

Thông tin tác giả