Durability of steel reinforced concrete in chloride environments: An overview

Lomborg, 2001

Mehta, 2001, Reducing the environmental impact of concrete, Concr Int, 23, 61

Van Dam TJ, Smartz BW. Use of performance specified (ASTM C1157) cements in Colorado transportation projects: case studies. In: TRB 89th annual meeting compendium of papers DVD, Transportation Research Board, Washington DC, 2010.

ASCE. Report card for America’s infrastructure. American Society of Civil Engineers. <http://www.infrastructurereportcard.org/> [accessed 01.06.10].

Samples L, Ramirez J. Methods of corrosion protection and durability of concrete bridge decks reinforced with epoxy-coated bars, phase I, FHWA/IN/JTRP-98/15. Purdue University, IN, 1999.

Bertolini, 2004

Morefield SW, Hock VF, Weiss Jr CA, Malone PG. Application of electrokinetic nanoparticle migration in the production of novel concrete-based composites, December 2008. <http://www.oai.dtic.mil/oai/oai?verb=getRecord&metadataPrefix=html&identifier=ADA504199> [accessed 19.10.10].

Cardenas, 2009, Rapid electrokinetic nanoparticle transport in concrete

Cardenas, 2006, Electrokinetic nanoparticle treatment of hardened cement paste for reduction of permeability, J Mater Civil Eng, 18, 554, 10.1061/(ASCE)0899-1561(2006)18:4(554)

Hartt W, Charvin S, Lee S. Influence of permeability reducing and corrosion inhibiting admixtures in concrete upon initiation of salt induced embedded metal corrosion, prepared for the Florida Department of Transportation; 1999.

California Department of Transportation, bridge design specifications, section 9 – reinforced concrete; 2003.

Toutanji HA, Delatte D. Supplementary materials to enhance bridge deck durability, prepared for University Transportation Center for Alabama; 2001.

Gruber, 2001, Increasing concrete durability with high-reactivity metakaolin, Cem Concr Compos, 23, 479, 10.1016/S0958-9465(00)00097-4

Choi, 2006, Corrosion behavior of steel bar embedded in fly ash concrete, Corros Sci, 48, 1733, 10.1016/j.corsci.2005.05.019

Lu, 2002, Relationship between the free and total chloride diffusivity in concrete, Cem Concr Res, 32, 323, 10.1016/S0008-8846(01)00664-0

Thomas, 1999, Modelling chloride diffusion in concrete: effect of fly ash and slag, Cem Concr Res, 29, 487, 10.1016/S0008-8846(98)00192-6

Manera, 2008, Chloride threshold for rebar corrosion in concrete with addition of silica fume, Corros Sci, 50, 554, 10.1016/j.corsci.2007.07.007

Khan, 2010, Nanostructure and microstructure of cement concrete incorporating multicementitious composites, Transp Res Rec: J Transp Res Brd, 2141, 21, 10.3141/2141-05

Yang, 2003, An electrochemical method for accelerated chloride migration test of diffusion coefficient in cement-based materials, Mater Phys Chem, 81, 116, 10.1016/S0254-0584(03)00159-7

Dhir, 1999, Development of chloride-resisting concrete using fly ash, Fuel, 78, 137, 10.1016/S0016-2361(98)00149-5

Hossain, 2009, Properties of concrete incorporating ultrafine fly ash and silica fume, Transp Res Rec: J Transp Res Brd, 2113, 41, 10.3141/2113-05

Thomas, 1999, Use of ternary cementitious systems containing silica fume and fly ash in concrete, Cem Concr Res, 29, 1207, 10.1016/S0008-8846(99)00096-4

Hariharan, 2011, Effect of ternary cementitious system on compressive strength and resistance to chloride ion penetration, Int J Civil Struct Eng, 1, 696

Uysal, 2012, The effect of mineral admixtures on mechanical properties, chloride ion permeability and impermeability of self-compacting concrete, Constr Build Mater, 27, 263, 10.1016/j.conbuildmat.2011.07.049

Mangat, 1994, Microstructure, chloride diffusion and reinforcement corrosion in blended cement paste and concrete, Cem Concr Compos, 16, 73, 10.1016/0958-9465(94)90002-7

Güneyisi, 2006, Performance of plain and blended cement concretes against corrosion cracking, 189

Shi, 2011, Strength and corrosion properties of Portland cement mortar and concrete with mineral admixtures, Constr Build Mater, 25, 3245, 10.1016/j.conbuildmat.2011.03.011

Zhang, 2011, Effects of mineral admixtures on the chloride permeability of hydraulic concrete, Adv Mater Res, 8, 168, 10.4028/www.scientific.net/AMR.380.168

Xu, 1995, Effectiveness of mineral admixtures in reducing ASR expansion, Cem Concr Res, 25, 1225, 10.1016/0008-8846(95)00115-S

Malvar, 2002, Alkali-silica reaction mitigation: state of the art and recommendations, ACI Mater J, 99, 480

Taha, 2008, Using lithium nitrate and pozzolanic glass powder in concrete as ASR suppressors, Cem Concr Compos, 30, 497, 10.1016/j.cemconcomp.2007.08.010

Shehata, 2010, The role of alkali content of Portland cement on the expansion of concrete prisms containing reactive aggregates and supplementary cementing materials, Cem Concr Res, 40, 569, 10.1016/j.cemconres.2009.08.009

Papadakis, 2000, Effect of supplementary cementing materials on concrete resistance against carbonation and chloride ingress, Cem Concr Res, 30, 291, 10.1016/S0008-8846(99)00249-5

Gonen, 2007, The influence of mineral admixtures on the short and long-term performance of concrete, Build Environ, 42, 3080, 10.1016/j.buildenv.2006.10.019

Shashiprakash SG, Thomas MDA. Sulfate resistance of mortars containing high-calcium fly ashes and combinations of highly reactive Pozzolans and fly ash. ACI Special Publication, vol. 199; 2001. p. 221–38.

California Department of Transportation. Memo to designers 1–5: protection of reinforcement against corrosion due to chlorides, acids and sulfates; 2002.

Mehta PK. Pozzolanic and cementitious by-products in concrete – another look. In: Malhotra VM, editor. Proceedings of the third CANMENT/ACI international conference, American Concrete Institute, Michigan, ACI SP 114, vol. 1; 1989. p. 1–43.

Mehta PK. Role of pozzolanic and cementitious material in sustainable development of concrete industry. In: Malhotra VM, editor. Proceedings of the sixth CANMET/ACI/JCI, international conference on fly ash, silica fume and natural Pozzolans in concrete, American Concrete Institute, Michigan, ACI SP-178, vol. 1; 1998. p. 1–20.

Collepardi S, Corinaldesi V, Moriconi G, Bonora G, Collepardi M. Durability of high-performance concretes with pozzolanic and composite cements, ACI special report SP 192-10, American Concrete Institute; 2000.

Malvar, 2006, Efficiency of fly ash in mitigating alkali silica reaction based on chemical composition, ACI Mater J, 103, 319

Lenke LR, Malvar LJ. Alkali silica reaction criteria for accelerated mortar bar tests based on field performance data. In: Proceedings of the world of coal ash, KY, May 4–7, 2009.

Malvar LJ. ASR prevention in DOD. In: TRB 89th annual meeting compendium of papers DVD, Transportation Research Board, Washington DC, 2010.

Rangaraju, 2009, Effectiveness of fly ash and slag in mitigating alkali–silica reaction induced by deicing chemicals, J Mater Civil Eng, 21, 19, 10.1061/(ASCE)0899-1561(2009)21:1(19)

ACAA. American Coal Ash Association; 2007. <http://www.acaa-usa.org/>.

Joshi, 1997

Scheetz BE, Olanrewaju J. Determination of the rate of formation of hydroceramic waste forms made with INEEL calcined wastes, final report prepared for the Department of Energy, 2001.

Hedegaard, 1992, Water permeability of fly ash concretes, Mater Struct, 25, 381, 10.1007/BF02472253

Wong, 1999, Properties of fly ash-modified cement mortar-aggregate interfaces, Cem Concr Res, 29, 1905, 10.1016/S0008-8846(99)00189-1

Gebler SH, Klieger P. ‘Effect of fly ash on the durability of air-entrained concrete. In: Proceedings of the 2nd international conference on the use of fly ash, silica fume, slag, and other mineral by-products in concrete, April 21–25, 1986, Madrid, Spain. ACI Publication SP-91.

Parande, 2011, Environmental effects on concrete using ordinary and pozzolana Portland cement, Constr Build Mater, 25, 288, 10.1016/j.conbuildmat.2010.06.027

Bouzoubaa N, Zhang MH, Malhotra VM, Golden, DM. Mechanical properties and durability of laboratory produced high-volume fly ash blended cements. ACI Special Publication, vol. 199; 2001. p. 55–82.

Pacheco-Torgal, 2009, Sulphuric acid resistance of plain, polymer modified, and fly ash cement concretes, Constr Build Mater, 23, 3485, 10.1016/j.conbuildmat.2009.08.001

Saraswathy, 2006, Corrosion performance of fly ash blended cement concrete: a state-of-art review, Corros Rev, 24, 87, 10.1515/CORRREV.2006.24.1-2.87

Dhir, 1997, Developing chloride resisting concrete using PFA, Cem Concr Res, 27, 1633, 10.1016/S0008-8846(97)00146-4

Byfors, 1986, Chloride binding in cement paste, Nordic Concr Res, 5, 27

Arya, 1990, Factors influencing chloride binding in concrete, Cem Concr Res, 20, 291, 10.1016/0008-8846(90)90083-A

Arya, 1995, Effect of cement type on chloride binding and corrosion of steel in concrete, Cem Concr Res, 25, 893, 10.1016/0008-8846(95)00080-V

Holden, 1983, Corrosion of reinforcement in concrete construction, 143

Wiens U, Schiessl P. Chloride binding of cement paste containing fly ash. In: Justnes H, editor. Proceedings of the 10th ICCC, Goteborg, Sweden, 1997. p. 4–10.

Kayyali, 1995, The Cl−:OH− ratio in chloride-contaminated concrete – a most important criterion, Mag Concr Res, 47, 235, 10.1680/macr.1995.47.172.235

Nagataki, 1993, Condensation of chloride ion in hardened cement matrix materials and on embedded steel bars, ACI Mater J, 90, 323

Ampadu, 1999, Beneficial effect of fly ash on chloride diffusivity of hardened cement paste, Cem Concr Res, 29, 585, 10.1016/S0008-8846(99)00047-2

Thomas, 1996, Chloride threshold in marine concrete, Cem Concr Res, 26, 513, 10.1016/0008-8846(96)00035-X

Oh, 2003, Experimental investigation of the threshold chloride concentration for corrosion initiation in reinforced concrete structures, Mag Concr Res, 55, 117, 10.1680/macr.2003.55.2.117

Schiessl P, Breit W. Local repair measures at concrete structures damaged by reinforcement corrosion – aspects of durability. In: Proceedings of the 4th international symposium on corrosion of reinforcement in concrete construction, The Royal Society of Chemistry, Cambridge, 1996. p. 525–34.

Alonso, 2002, Chloride threshold dependence of pitting potential of reinforcements, Electrochim Acta, 47, 3469, 10.1016/S0013-4686(02)00283-9

Page, 1986, A study of the quantitative relationship between strength and pore-size distribution of porous materials, Cem Concr Res, 16, 79, 10.1016/0008-8846(86)90071-2

Diamond, 1981, Two Danish flyashes on alkali contents of pore solutions of cement-flyash pastes, Cem Concr Res, 11, 383, 10.1016/0008-8846(81)90110-1

Kawamura, 1988, Effect of flyash on pore solution composition in calcium and sodium chloride-bearing mortars, Cem Concr Res, 18, 763, 10.1016/0008-8846(88)90101-9

Saraswathy, 2007, Effectiveness of fly ash activation on the corrosion performance of steel embedded in concrete, Mag Concr Res, 59, 651, 10.1680/macr.2007.59.9.651

Obla, 2003, Properties of concrete containing ultra-fine fly ash, ACI Mater J, 100, 1

Jeon S, Nam J-H, An J-H, Kwon S-A. Physical properties of rapid-setting concrete using ultra fine fly ash. in proceedings of selected papers from the 2009 GeoHunan international conference, new technologies in construction and rehabilitation of Portland cement concrete pavement and bridge deck pavement, GSP 196.

Hossain, 2008, Early age stress development, relaxation, and cracking in restrained low W/B ultrafine fly ash mortars, J Adv Concr Technol, 6, 261, 10.3151/jact.6.261

Subramaniam, 2005, Influence of ultrafine fly ash on the early age response and the shrinkage cracking potential of concrete, J Mater Civil Eng, 17, 45, 10.1061/(ASCE)0899-1561(2005)17:1(45)

Duval, 1998, Influence of silica fume on the workability and the compressive strength of high-performance concretes, Cem Concr Res, 28, 533, 10.1016/S0008-8846(98)00010-6

Cong, 1989, Role of silica fume in compressive strength of cement paste, mortar, and concrete, Mater J, 89, 375

Song, 2010, Estimation of the permeability of silica fume cement concrete, Constr Build Mater, 24, 315, 10.1016/j.conbuildmat.2009.08.033

Selvaraj, 2003, The influence of silica fume on the factors affecting the corrosion of reinforcement in concrete – a review, Struct Concr J FIB, 4, 19, 10.1680/stco.2003.4.1.19

Page, 1983, Pore solution composition and chloride binding capacity of silica-fume cement pastes, Mater Struct, 16, 19

Byfors, 1987, Influence of silica fume and flyash on chloride diffusion and ph values in cement paste, Cem Concr Res, 17, 115, 10.1016/0008-8846(87)90066-4

Larsen CK. Chloride binding in concrete, doctoral thesis, report no. 1998: 101, Norwegian University of Science and Technology, NTNU, 1998.

Pettersson K. Chloride threshold value and the corrosion rate in reinforced concrete. In: Proceedings of the Nordic Seminar, Lund, 1995. p. 257–66.

Dotto, 2004, Influence of silica fume addition on concretes physical properties and on corrosion behaviour of reinforcement bars, Cem Concr Compos, 26, 31, 10.1016/S0958-9465(02)00120-8

Page, 1985, Electrochemical monitoring of corrosion of steel in microsilica cement pastes, Mater Struct, 18, 41, 10.1007/BF02473363

Hadj-sadok, 2011, Microstructure and durability of mortars modified with medium active blast furnace slag, Constr Build Mater, 25, 1018, 10.1016/j.conbuildmat.2010.06.077

Khatib, 2005, Selected engineering properties of concrete incorporating slag and metakaolin, Constr Build Mater, 19, 460, 10.1016/j.conbuildmat.2004.07.017

Al-Gahtani, 1993, Rebar corrosion and sulfate resistance of blast-furnace slag cement, J Mater Civil Eng, 6, 223, 10.1061/(ASCE)0899-1561(1994)6:2(223)

Luo, 2003, Study of chloride binding and diffusion in GGBS concrete, Cem Concr Res, 33, 1, 10.1016/S0008-8846(02)00712-3

Cheng, 2005, Influence of GGBS on durability and corrosion behavior of reinforced concrete, Mater Chem Phys, 93, 404, 10.1016/j.matchemphys.2005.03.043

Gouda, 1970, Corrosion and corrosion inhibition of reinforced steel. I. Immersed in alkaline solutions, Br Corros J, 5, 198, 10.1179/000705970798324450

Dhir, 2000, Chloride binding in GGBS concrete, Cem Concr Res, 26, 1767, 10.1016/S0008-8846(96)00180-9

Thomas, 2008, Performance of slag concrete in marine environment, ACI Mater J, 105, 628

Justice, 2007, Influence of metakaolin surface area on properties of cement-based materials, J Mater Civil Eng, 19, 762, 10.1061/(ASCE)0899-1561(2007)19:9(762)

Al-Akhras, 2006, Durability of metakaolin concrete to sulfate attack, Cem Concr Res, 36, 1727, 10.1016/j.cemconres.2006.03.026

Badogiannis, 2009, Exploitation of poor Greek Kaolins: durability of metakaolin concrete, Cem Concr Compos, 31, 128, 10.1016/j.cemconcomp.2008.11.001

Shekarchi, 2010, Transport properties in metakaolin blended concrete, Constr Build Mater, 24, 10.1016/j.conbuildmat.2010.04.035

Asbridge, 2001, Effects of metakaolin and the interfacial transition zone on the diffusion of chloride ions through cement mortars, Cem Concr Res, 31, 1567, 10.1016/S0008-8846(01)00598-1

Baykal, 2000

Savas, 1999

Wee, 2000, Evaluation of rapid chloride permeability test (RCPT) results for concrete containing mineral admixture, ACI Mater J, 97, 221

Saeki, 2006, Estimation of chloride diffusion coefficient of concrete using mineral admixtures, J Adv Concr Technol, 4, 385, 10.3151/jact.4.385

Stanish, 1997

Andrade, 2000, Non-steady-state chloride diffusion coefficients obtained from migration and natural diffusion tests. Part I: Comparison between several methods of calculation, Mater Struct, 33, 21, 10.1007/BF02481692

Castellote, 2001, Measurement of the steady and non-steady-state chloride diffusion coefficients in a migration test by means of monitoring the conductivity in the Anolyte chamber. Comparison with Natural Diffusion Tests, Cem Concr Res, 31, 1411, 10.1016/S0008-8846(01)00562-2

Husain, 2004, Accelerated AC impedance testing for prequalification of marine construction materials, Desalination, 165, 377, 10.1016/S0011-9164(04)00269-3

Shi X, Liu Y, Mooney M, Berry M, Hubbard B, Fay L, et al. Effect of chloride-based deicers on reinforced concrete structures. Final report prepared for the Washington State Department of Transportation, July 2010.

Stanish, 2004, A novel method for describing chloride ion transport due to an electrical gradient in concrete: Part 1. Theoretical description, Cem Concr Res, 34, 43, 10.1016/S0008-8846(03)00191-1

Ahmed, 2009, Evaluation of binary and ternary blends of pozzolanic materials using the rapid chloride permeability test, J Mater Civil Eng, 21, 446, 10.1061/(ASCE)0899-1561(2009)21:9(446)

Whiting, 1981, Rapid measurement of the chloride permeability of concrete, Public Roads, 45, 101

Yang, 2009, Effect of styrene–butadiene rubber latex on the chloride permeability and microstructure of Portland cement mortars, Constr Build Mater, 23, 2283, 10.1016/j.conbuildmat.2008.11.011

He, 2008, Chloride permeability and microstructure of Portland cement mortars incorporating nanomaterials, Transp Res Rec: J Transp Res Brd, 2070, 13, 10.3141/2070-03

Shi, 1998, Effect of supplementary cementing materials on the specific conductivity of pore solution and its implications on the rapid chloride permeability test (AASHTO T277 and ASTM C1202) results, ACI Mater J, 95, 389

Feldman, 1999, Rapid chloride permeability test on blend cement and other concretes: correlations between charge, initial current and conductivity, Constr Build Mater, 13, 149, 10.1016/S0950-0618(98)00033-6

Wee, 2000, Evaluation of rapid chloride permeability test (RCPT) results for concrete containing mineral admixtures, ACI Mater J, 97, 221

Cho, 2006, Using the chloride migration rate to predict the chloride penetration resistance of concrete, 575

Ghosh P, Tikalsky PJ. Determination of diffusion coefficients and corrosion initiation time for ternary cementitious mixtures. In: TRB 90th annual meeting compendium of papers DVD, Transportation Research Board, Washington DC, 2011.

Diaz, 2010, Resistivity of cementitious materials measured in diaphragm migration cells: the effect of the experimental set-up, Cem Concr Res, 40, 1465, 10.1016/j.cemconres.2010.05.004

Vivas E, Boyd A, Hamilton III HR. Permeability of concrete – comparison of conductivity and diffusion methods, final report prepared for the Florida Department of Transportation, June 2007.

Weyers, 1998, Corrosion service life model, 105

Pettersson K. Service life of concrete structure including the propagation time. In: Concrete under severe conditions 2: environment and loading: proceedings of the 2nd international conference on concrete under severe conditions, CONSEC’98, Tromsϕ, Norway, June 21–24, 1998. p. 489–98.

Costa, 1999, Chloride penetration into concrete in marine environment – Part I: Main parameters affecting chloride penetration, Mater Struct, 32, 252, 10.1007/BF02479594

Schiessl, 1990, Influence of concrete composition and microclimate on the critical chloride content in concrete, 49

Stratfull, 1956, The corrosion of steel in a reinforced concrete bridge, Corrosion, 13, 173

Hartt WH, Rodney GP, Virginie L, Lysogorski DK. A critical literature review of high-performance corrosion reinforcements in concrete bridge applications. FHWA-HRT-04-093, 2004.

Glass, 1997, The presentation of the chloride threshold level for corrosion of steel in concrete, Corros Sci, 39, 1001, 10.1016/S0010-938X(97)00009-7

Alonso, 2000, Chloride threshold values to depassivate reinforcing bars embedded in a standardized OPC mortar, Cem Concr Res, 30, 1047, 10.1016/S0008-8846(00)00265-9

Glass, 2000, Chloride-induced corrosion of steel in concrete, Prog Struct Eng Mater, 2, 448, 10.1002/pse.54

Angst, 2009, Critical chloride content in reinforced concrete – a review, Cem Concr Res, 39, 1122, 10.1016/j.cemconres.2009.08.006

Ann, 2007, Chloride threshold level for corrosion of steel in concrete, Corros Sci, 49, 4113, 10.1016/j.corsci.2007.05.007

Kayyali, 1988, Chloride penetration and the ratio of Cl−/OH− in the pores of cement paste, Cem Concr Res, 18, 895, 10.1016/0008-8846(88)90025-7

Yonezawa, 1988, Pore solution composition and chloride effects on the corrosion of steel in concrete, Corrosion, 44, 489, 10.5006/1.3583967

Breit, 1998, Critical chloride content – investigations of steel in alkaline chloride solutions, Mater Corros, 49, 539, 10.1002/(SICI)1521-4176(199808)49:8<539::AID-MACO539>3.3.CO;2-Y

Li, 2001, Chloride corrosion threshold of reinforcing steel in alkaline solutions – open-circuit immersion tests, Corrosion, 57, 19, 10.5006/1.3290325

Li L, Sagüés AA. Metallurgical effects on chloride ion corrosion threshold of steel in concrete, final report for the Florida Department of Transportation. Tallahassee, FL, report no. WPI 0510806, November 2001.

Yu, 2012, Threshold chloride level and characteristics of reinforcement corrosion initiation in simulated concrete pore solutions, Constr Build Mater, 26, 723, 10.1016/j.conbuildmat.2011.06.079

Yu, 2007, Effect of reinforcement and coarse aggregates on chloride ingress into concrete and time-to-corrosion: Part I – Spatial chloride distribution and implications, Corrosion, 63, 843, 10.5006/1.3278434

Yu, 2007, Effects of reinforcement and coarse aggregates on chloride ingress into concrete and time-to-corrosion: Part 1 – Spatial chloride distribution and implications, Corrosion, 63, 843, 10.5006/1.3278434

Cros P, Hartt WH, Yu H. Effects of reinforcement on chloride intrusion into concrete and time-to-corrosion. In: Proceedings of the 16th international corrosion congress, September 22–26, 2005, Beijing, China.

Hansen, 1999, Numerical simulation of reinforced concrete deterioration: Part I: Chloride diffusion, ACI Mater J, 96, 173

Oh, 2003, Chloride diffusion analysis of concrete structures considering effects of reinforcing, ACI Mater J, 100, 143

Kranc, 2002, Decreased corrosion initiation time of steel in concrete due to reinforcing bar obstruction of diffusional flow, ACI Mater J, 99, 51

Yu, 2007, Effects of reinforcement and coarse aggregates on chloride ingress into concrete and time-to-corrosion: Part 2: Spatial distribution of coarse aggregates, Corrosion, 63, 924, 10.5006/1.3278310

Yu, 2010, Correction of chloride threshold concentration and time-to-corrosion due to reinforcement presence, Mater Corros, 61, 1

Shi, 2011, A phenomenological model for the chloride threshold of pitting corrosion of steel in simulated concrete pore solutions, Anti-Corros Methods Mater, 58, 179, 10.1108/00035591111148894

Hartt, 2008, Effect of cement alkalinity on chloride threshold and time-to-corrosion of reinforcing steel in concrete, Corrosion, 64, 671, 10.5006/1.3279929

Dehwah, 2002, Effect of cement alkalinity on pore solution chemistry and chloride-induced reinforcement corrosion, ACI Mater J, 99, 227

Hassain, 1996, Chloride threshold for corrosion of reinforcement in concrete, ACI Mater J, 93, 1

Moreno, 2004, Corrosion of reinforcing steel in simulated concrete pore solutions – effect of carbonation and chloride content, Corros Sci, 46, 2681, 10.1016/j.corsci.2004.03.013

Monfore, 1960, Corrosion of prestressed wire in concrete, ACI Mater J, 57, 491

Söylev, 2005, Corrosion of reinforcement in relation to presence of defects at the interface between steel and concrete, J Mater Civil Eng, 17, 447, 10.1061/(ASCE)0899-1561(2005)17:4(447)

Yu, 2010, Laboratory investigation of reinforcement corrosion initiation and chloride threshold concentration for self-compacting concrete, Cem Concr Res, 40, 1507, 10.1016/j.cemconres.2010.06.004

Yu, 2011, Modelling corrosion initiation of reinforcing steel in concrete: effect of non-diffusive coarse aggregate, J Compos Mater, 45, 153, 10.1177/0021998310371549

Berman, 1972, Determination of chloride in hardened Portland cement paste, mortar, and concrete, J Mater, 7, 330

Harald, 1998, A review of chloride binding in cementitious systems, Nordic Concr Res, 21, 1

Anik, 1997, Chloride binding capacity of various hydrated cement systems, Adv Cem Based Mater, 6, 28, 10.1016/S1065-7355(97)00007-2

Buenfeld, 1998, Chloride transport in concrete subjected to an electric field, J Mater Civil Eng, 10, 220, 10.1061/(ASCE)0899-1561(1998)10:4(220)

Suryavanshi, 1998, Corrosion of reinforcement steel embedded in high water–cement ratio concrete contaminated with chloride, Cem Concr Compos, 20, 263, 10.1016/S0958-9465(98)00018-3

Glass, 2000, The influence of chloride binding on the chloride-induced corrosion risk in reinforced concrete, Corros Sci, 42, 329, 10.1016/S0010-938X(99)00083-9

Reddy, 2002, On the corrosion risk presented by chloride bound in concrete, Cem Concr Compos, 24, 1, 10.1016/S0958-9465(01)00021-X

Shi, 2011, A phenomenological model for the chloride threshold of pitting corrosion of steel in simulated concrete pore solutions, Anti-Corros. Meth Mater, 58, 179, 10.1108/00035591111148894

Neville, 1995, Chloride attack of reinforced concrete: an overview, Mater Struct, 28, 63, 10.1007/BF02473172

Traetteberg A. The mechanism of chloride penetration in concrete, SINTEF report STF65 A77070, 1977. 51 pp.

Tritthart, 1989, Chloride binding in cement II. The influence of the hydroxide concentration in the pore solution of hardened cement paste on chloride binding, Cem Concr Res, 19, 683, 10.1016/0008-8846(89)90039-2

Rasheeduzzafar, 1991, Effect of cement composition on chloride binding and corrosion of reinforcing steel in concrete, Cem Concr Res, 21, 777, 10.1016/0008-8846(91)90173-F

Andrade, 1986, Pore solution chemistry and corrosion in hydrated cement systems containing chloride salts: a study of cation specific effects, Br Corros J, 21, 49, 10.1179/000705986798272415

Tang, 1993, Chloride binding capacity and binding isotherms of OPC pastes and mortars, Cem Concr Res, 23, 247, 10.1016/0008-8846(93)90089-R

Jiricková, 2006, Chloride binding in building materials, J Build Phys, 29, 189, 10.1177/1744259106060138

Liu Y, Shi X. Stochastically modeling of service life of concrete structures in chloride-laden environments. J Mater Civil Eng 2012, in press.

NIST, Publicly available computer models. http://ciks.cbt.nist.gov/~bentz/phpct/cmml.html [accessed 01.06.10].

Khatri, 2004, Characteristic service life for concrete exposed to marine environments, Cem Concr Res, 34, 745, 10.1016/S0008-8846(03)00086-3

Erdoğdu, 2004, Determination of chloride diffusion coefficient of concrete using open-circuit potential measurements, Cem Concr Res, 34, 603, 10.1016/j.cemconres.2003.09.024

Zhang, 1998, Modelling of chloride diffusion into surface-treated concrete, Cem Concr Compos, 20, 253, 10.1016/S0958-9465(98)00003-1

Kirkpatrick, 2002, Probabilistic model for the chloride-induced corrosion service life of bridge decks, Cem Concr Res, 32, 1943, 10.1016/S0008-8846(02)00905-5

Spragg, 2011, Wetting and drying of concrete using aqueous solutions containing deicing salts, Cem Concr Compos, 33, 535, 10.1016/j.cemconcomp.2011.02.009

Castro, 2001, Interpretation of chloride profiles from concrete exposed to tropical marine environments, Cem Concr Res, 31, 529, 10.1016/S0008-8846(01)00453-7

Meijers SJH, Schlangen E. 2D-analysis of chloride ingress in the tidal zone of marine concrete structures. In: Weiss J, Kovler K, Marchand J, Mindess S, editors. Proceedings of the international RILEM symposium on concrete science and engineering: a tribute to Arnon Bentur, 2004. doi: 10.1617/2912143926.045.

Guimaraes ATC, Helene PRL. Diffusion of Chloride Ions in Unsaturated Concrete: Forecast of Service Life in a Wet-Dry Environment. ACI Special Publication, vol. 229; 2005. p. 175–94.

Hong, 1999, Effects of cyclic chloride exposure on penetration of concrete cover, Cem Concr Res, 29, 1379, 10.1016/S0008-8846(99)00073-3

Boddy, 1999, An overview and sensitivity study of a multimechanistic chloride transport model, Cem Concr Res, 29, 827, 10.1016/S0008-8846(99)00045-9

Marchand, 2009, Predicting the service-life of concrete structures – limitations of simplified models, Cem Concr Compos, 31, 515, 10.1016/j.cemconcomp.2009.01.007

Lee, 1996, Molecular dynamics simulation of ion mobility. 2. Alkali metal and halide ions using the SPC/E model for water at 25°C, J Phys Chem, 100, 1420, 10.1021/jp953050c

Castellote, 2001, Oxygen and chloride diffusion in cement pastes as a validation of chloride diffusion coefficients obtained by steady-state migration tests, Cem Concr Res, 31, 621, 10.1016/S0008-8846(01)00469-0

Hobbs, 1999, Aggregate influence on chloride ion diffusion into concrete, Cem Concr Res, 29, 1995, 10.1016/S0008-8846(99)00188-X

Engelund, 1998, A probabilistic model for chloride-ingress and initiation of corrosion in reinforced concrete structures, Struct Saf, 20, 69, 10.1016/S0167-4730(97)00022-2

Williamson, 2008, Validation of probability-based chloride-induced corrosion service-life model, ACI Mater J, 105, 375

Kranc SC, Sagüés AA. Advanced analysis of chloride ion penetration profiles in marine substructures, final report prepared for the Florida Department of Transportation, 2003.

Sagüés AA, Kranc SC, Presuel-Moreno F, Rey D, Torres-Acosta A, Yao L. Corrosion forecasting for 75-year durability design of reinforced concrete, final report prepared for the Florida Department of Transportation, 2001.

Pettersson K. Service life of concrete structure including the propagation time. In: Concrete under severe conditions 2: environment and loading: Proceedings of the 2nd international conference on concrete under severe conditions, CONSEC’98, Troms (Norway, June 21–24, 1998, p. 489–98.

Hartt WH. Corrosion initiation projection for reinforced concrete exposed to chlorides – Part I: Black bars. In: Proceedings of CORROSION 2011 conference, NACE international, paper no. 11006, Houston, Texas. p. 18.

Hartt, WH. Corrosion initiation projection for reinforced concrete exposed to chlorides – Part II: Corrosion resistant bars. In: Proceedings of CORROSION 2011 conference, NACE international, paper no. 11009, Houston, Texas. p. 11.

Ožbolt J, Balabanić G, Kušter M. 3D numerical modelling of steel corrosion in concrete structures. Corros Sci, in press. doi: 10.1016/j.corsci.2011.08.026.

Broomfield JP. Modelling the rate of deterioration of reinforced concrete structures. In: Proceedings of CORROSION 2011 conference, NACE international, paper no. 11003, Houston, Texas. p. 13.

Otieno M, Beushausen H, Alexander M. Prediction of corrosion rate in RC structures – a critical review. In: Andrade C, Mancini G, editors. Modelling of corroding concrete structures, RILEM, 2011. p. 15–37. doi: 10.1007/978-94-007-0677-4_2.

Francois R, Arliguie G, Castel A. Influence of service cracking on service life of reinforced concrete. In: Concrete under severe conditions 2: environment and loading: proceedings of the 2nd international conference on concrete under severe conditions, CONSEC’98, Tromsϕ, Norway, June 21–24, 1998. p. 143–52.

Lin, 2010, Numerical modeling for predicting service life of reinforced concrete structures exposed to chloride environments, Cem Concr Compos, 32, 571, 10.1016/j.cemconcomp.2010.07.012

Chen D. Computational framework for durability assessment of reinforced concrete structures under coupled deterioration processes. Doctoral thesis, PhD in civil engineering, Vanderbilt University, August 2006.

Nokken, 2006, Time dependent diffusion in concrete – three laboratory studies, Cem Concr Res, 36, 200, 10.1016/j.cemconres.2004.03.030

Song, 2009, Service life prediction of repaired concrete structures under chloride environment using finite difference method, Cem Concr Compos, 31, 120, 10.1016/j.cemconcomp.2008.11.002