Durability engineering in all-inorganic CsPbX3 perovskite solar cells: strategies and challenges

Qureshi, 2016, Energy crisis, greenhouse gas emissions and sectoral growth reforms: repairing the fabricated mosaic, J. Clean. Prod., 112, 3657, 10.1016/j.jclepro.2015.08.017 Sharma, 2021, Exploring the nexus between agriculture and greenhouse gas emissions in BIMSTEC region: the role of renewable energy and human capital as moderators, J. Environ. Manag., 297, 113316 Ghorbani, 2020, Assessment of a cost-optimal power system fully based on renewable energy for Iran by 2050 – achieving zero greenhouse gas emissions and overcoming the water crisis, Renew. Energy, 146, 125, 10.1016/j.renene.2019.06.079 Nasrollahi, 2021, The greenhouse technology in different climate conditions: a comprehensive energy-saving analysis, Sustain. Energy Technol. Assessments, 47, 101455, 10.1016/j.seta.2021.101455 Tao, 2021, Stability of mixed-halide wide bandgap perovskite solar cells: strategies and progress, J. Energy Chem., 61, 395, 10.1016/j.jechem.2021.03.038 Li, 2021, Encapsulation of perovskite solar cells for enhanced stability: structures, materials and characterization, J. Power Sources, 485, 10.1016/j.jpowsour.2020.229313 Ouedraogo, 2020, Stability of all-inorganic perovskite solar cells, Nano Energy, 67, 10.1016/j.nanoen.2019.104249 Wei, 2021, Assessment of the solar energy accommodation capability of the district integrated energy systems considering the transmission delay of the heating network, Int. J. Electr. Power Energy Syst., 130, 106821, 10.1016/j.ijepes.2021.106821 Pandey, 2021, Utilization of solar energy for wastewater treatment: challenges and progressive research trends, J. Environ. Manag., 297, 113300 Xiong, 2021, A comprehensive review on the application of hybrid nanofluids in solar energy collectors, Sustain. Energy Technol. Assessments, 47, 101341, 10.1016/j.seta.2021.101341 Shockley, 1961, Detailed balance limit of efficiency of p-n junction solar cells, J. Appl. Phys., 32, 510, 10.1063/1.1736034 Yu, 2016, Selecting tandem partners for silicon solar cells, Nat. Energy, 1, 16137, 10.1038/nenergy.2016.137 Correa-Baena, 2017, Promises and challenges of perovskite solar cells, Science, 358, 739, 10.1126/science.aam6323 Chen, 2020, The chemistry of colloidal semiconductor nanocrystals: from metal-chalcogenides to emerging perovskite, Coord. Chem. Rev., 418, 10.1016/j.ccr.2020.213333 Chen, 2020, High efficiency mesoscopic solar cells using CsPbI3 perovskite quantum dots enabled by chemical interface engineering, J. Am. Chem. Soc., 142, 3775, 10.1021/jacs.9b10700 Muralidharan, 2021, Melamine-assisted synthesis of vanadium nitride quantum dots: application for full-cell lithium-ion batteries, J. Alloys Compd., 161522, 10.1016/j.jallcom.2021.161522 He, 2021, Labeling of liver cells with CdSe/ZnS quantum dot-based fluorescence probe below freezing point, Spectrochim. Acta Mol. Biomol. Spectrosc., 263, 120203, 10.1016/j.saa.2021.120203 Chen, 2021, Phosphating passivation layer for quantum dot sensitized solar cells, Thin Solid Films, 727, 138678, 10.1016/j.tsf.2021.138678 Kang, 2021, n-doped inorganic molecular clusters as a new type of hole transport material for efficient organic solar cells, Joule, 5, 646, 10.1016/j.joule.2021.01.011 Qashou, 2021, Nanostructure film of Ch-diisoQ/Si for the enhancement of photoelectrical performance of organic/inorganic cells, Phys. B Condens. Matter, 618, 413172, 10.1016/j.physb.2021.413172 Saeed, 2021, Recent developments in dye-sensitized photovoltaic cells under ambient illumination, Dyes Pigments, 194, 109626, 10.1016/j.dyepig.2021.109626 Xu, 2021, Dimeric dithiafulvene sensitizers involving a 1,3,4-oxadiazole as auxiliary acceptor and pyridine as electron-withdrawing anchoring group for efficient dye sensitized solar cells, Dyes Pigments, 193, 109483, 10.1016/j.dyepig.2021.109483 Ye, 2021, Recent advances of Cu-based hole transport materials and their interface engineering concerning different processing methods in perovskite solar cells, J. Energy Chem., 62, 459, 10.1016/j.jechem.2021.04.002 Hu, 2021, Recent advances in carbon nanomaterial-optimized perovskite solar cells, Mater. Today Energy, 21, 100769, 10.1016/j.mtener.2021.100769 Tang, 2021, Recent progress of flexible perovskite solar cells, Nano Today, 39, 101155, 10.1016/j.nantod.2021.101155 Ali, 2021, Impact of carbon-based charge transporting layer on the performance of perovskite solar cells, Sol. Energy, 221, 254, 10.1016/j.solener.2021.04.040 Krishna, 2021, Progress in ambient air-processed perovskite solar cells: insights into processing techniques and stability assessment, Sol. Energy, 224, 1369, 10.1016/j.solener.2021.07.002 Kojima, 2009, Organometal halide perovskites as visible-light sensitizers for photovoltaic cells, J. Am. Chem. Soc., 131, 6050, 10.1021/ja809598r Zhao, 2018, Rational design of halide double perovskites for optoelectronic applications, Joule, 2, 1662, 10.1016/j.joule.2018.06.017 Li, 2017, All inorganic halide perovskites nanosystem: synthesis, structural features, optical properties and optoelectronic applications, Small, 13, 10.1002/smll.201603996 Rui Wang, 2019, A review of perovskites solar cell stability, Adv. Funct. Mater., 29, 808 Lim, 2018, A mini review: can graphene Be a novel material for perovskite solar cell applications?, Nano-Micro Lett., 10, 27, 10.1007/s40820-017-0182-0 Wu, 2018, Perovskite CsPbX3: a promising nonlinear optical material and its applications for ambient all-optical switching with enhanced stability, Adv. Opt. Mater., 6, 10.1002/adom.201800400 Xie, 2022, Chemistry, functionalization, and applications of recent monoelemental two-dimensional materials and their heterostructures, Chem. Rev., 122, 1127, 10.1021/acs.chemrev.1c00165 Chen, 2019, In situ preparation of a CsPbBr3/black phosphorus heterostructure with an optimized interface and photodetector application, Nanoscale, 11, 16852, 10.1039/C9NR06488E Li, 2020, Recent advances in solution-processed photodetectors based on inorganic and hybrid photo-active materials, Nanoscale, 12, 2201, 10.1039/C9NR07799E Wang, 2019, Engineering ultrafast charge transfer in a bismuthene/perovskite nanohybrid, Nanoscale, 11, 2637, 10.1039/C9NR00058E Dong, 2019, Chiral perovskites: promising materials toward next-generation optoelectronics, Small, 15 Faheem, 2019, All-inorganic perovskite solar cells: energetics, key challenges, and strategies toward commercialization, ACS Energy Lett., 5, 290, 10.1021/acsenergylett.9b02338 Wang, 2020, Inorganic perovskite solar cells based on carbon electrodes, Nano Energy, 77, 10.1016/j.nanoen.2020.105160 Duan, 2021, Highly efficient and stable inorganic CsPbBr3 perovskite solar cells via vacuum co-evaporation, Appl. Surf. Sci., 562, 150153, 10.1016/j.apsusc.2021.150153 Liu, 2021, Remarkable quality improvement of CsPbIBr2 perovskite film by cellulose acetate addition for efficient and stable carbon-based inorganic perovskite solar cells, Chem. Eng. J., 424, 130324, 10.1016/j.cej.2021.130324 Pan, 2021, Morphology control of perovskite film for efficient CsPbIBr2 based inorganic perovskite solar cells, Sol. Energy Mater. Sol. Cell., 221, 110878, 10.1016/j.solmat.2020.110878 Sun, 2021, Multifunctional brominated graphene oxide boosted charge extraction for high-efficiency and stable all-inorganic CsPbBr3 perovskite solar cells, Chem. Eng. J., 412, 128727, 10.1016/j.cej.2021.128727 Pei, 2020, BiBr3 as an additive in CsPbBr3 for carbon-based all-inorganic perovskite solar cell, J. Alloys Compd., 835, 155283, 10.1016/j.jallcom.2020.155283 Lee, 2020, Effect of embedded chalcogenide quantum dots in PbBr2 film on CsPbBr3 inorganic perovskite solar cells, J. Ind. Eng. Chem., 90, 281, 10.1016/j.jiec.2020.07.025 Xie, 2021, Lead acetate precursors for preparing CsPbI3 light harvester layers of inorganic perovskite solar cells, Sol. Energy, 222, 212, 10.1016/j.solener.2021.05.033 Yoo, 2021, Preparation of nanoscale inorganic CsPbIxBr3-x perovskite photosensitizers on the surface of mesoporous TiO2 film for solid-state sensitized solar cells, Appl. Surf. Sci., 551, 149387, 10.1016/j.apsusc.2021.149387 Wang, 2021, Guanidinium iodide modification enabled highly efficient and stable all-inorganic CsPbBr3 perovskite solar cells, Electrochim. Acta, 365, 137360, 10.1016/j.electacta.2020.137360 Zhang, 2021, Defect passivation strategy for inorganic CsPbI2Br perovskite solar cell with a high-efficiency of 16.77%, J. Mater. Sci. Technol., 82, 40, 10.1016/j.jmst.2020.08.051 Zhang, 2020, Low temperature preparation of all-inorganic CsPbI3 perovskite solar cells with ethanediamine as additive, Org. Electron., 87, 105940, 10.1016/j.orgel.2020.105940 Du, 2021, p-Type charge transfer doping of graphene oxide with (NiCo)1-y fey ox for air-stable, all-inorganic CsPbIBr2 perovskite solar cells, Angew Chem. Int. Ed. Engl., 60, 10608, 10.1002/anie.202016703 Duan, 2018, Lanthanide ions doped CsPbBr3 halides for HTM-free 10.14%-efficiency inorganic perovskite solar cell with an ultrahigh open-circuit voltage of 1.594 V, Adv. Energy Mater., 8, 10.1002/aenm.201802346 Zhou, 2020, Interfacial strain release from the WS2/CsPbBr3 van der Waals heterostructure for 1.7 V voltage all-inorganic perovskite solar cells, Angew Chem. Int. Ed. Engl., 59, 21997, 10.1002/anie.202010252 Wang, 2021, Size mismatch induces cation segregation in CsPbI3: forming energy level gradient and 3D/2D heterojunction promotes the efficiency of carbon-based perovskite solar cells to over 15%, Nano Energy, 106411, 10.1016/j.nanoen.2021.106411 Lin, 2020, Simulated development and optimized performance of CsPbI3 based all-inorganic perovskite solar cells, Sol. Energy, 198, 454, 10.1016/j.solener.2020.01.081 Liu, 2020, All-inorganic Sn-based perovskite solar cells: status, challenges, and perspectives, ChemSusChem, 13, 6477, 10.1002/cssc.202001680 Ozen, 2020, Orthorhombic CsPbI3 perovskites: thickness-dependent structural, optical and vibrational properties, Comput. Cond. Matter, 23 Heo, 2021, efficient and stable graded CsPbI3−xBrx perovskite solar cells and submodules by orthogonal processable spray coating, Joule, 5, 481, 10.1016/j.joule.2020.12.010 Baek, 2020, Highly photo-stable CsPbI3 perovskite quantum dots via thiol ligand exchange and their polymer film application, J. Ind. Eng. Chem., 83, 279, 10.1016/j.jiec.2019.11.038 Liu, 2020, Stable and efficient full-printable solar cells using inorganic metal oxide framework and inorganic perovskites, Appl. Mater. Today, 20, 100644, 10.1016/j.apmt.2020.100644 Fu, 2021, Multifunctional liquid additive strategy for highly efficient and stable CsPbI2Br all-inorganic perovskite solar cells, Chem. Eng. J., 422, 130572, 10.1016/j.cej.2021.130572 Shankar, 2020, Highly stable blue fluorescent lead free all-inorganic Cs2ZnX4 2D perovskite nanocrystals, J. Alloys Compd., 844, 156148, 10.1016/j.jallcom.2020.156148 Xun, 2021, Rapid synthesis of highly stable all-inorganic perovskite nanocrystals exhibiting strong blue luminescence, J. Alloys Compd., 872, 159612, 10.1016/j.jallcom.2021.159612 Wan, 2020, Efficient and stable planar all-inorganic perovskite solar cells based on high-quality CsPbBr3 films with controllable morphology, J. Energy Chem., 46, 8, 10.1016/j.jechem.2019.10.017 Ghosh, 2021, Investigating the property of water driven lead-free stable inorganic halide double perovskites, J. Colloid Interface Sci., 582, 1223, 10.1016/j.jcis.2020.08.114 Du, 2020, Tailoring all-inorganic cesium lead halide perovskites for robust triboelectric nanogenerators, Nano Energy, 70, 104514, 10.1016/j.nanoen.2020.104514 Trivedi, 2021, Development of all-inorganic lead halide perovskites for carbon dioxide photoreduction, Renew. Sustain. Energy Rev., 145, 111047, 10.1016/j.rser.2021.111047 Liu, 2021, Stability improvement of photoluminescent QLEDs based on Mn-doped all-inorganic metal halide perovskite quantum dots with silica shell, J. Alloys Compd., 888, 161505, 10.1016/j.jallcom.2021.161505 Cheng, 2022, Doped all-inorganic cesium zirconium halide perovskites with high-efficiency and tunable emission, J. Energy Chem., 65, 600, 10.1016/j.jechem.2021.06.033 Kanoun, 2021, Insights into the impact of Mn-doped inorganic CsPbBr3 perovskite on electronic structures and magnetism for photovoltaic application, Mater. Today Energy, 21, 100796, 10.1016/j.mtener.2021.100796 Ma, 2020, Doping in inorganic perovskite for photovoltaic application, Nano Energy, 78, 105354, 10.1016/j.nanoen.2020.105354 Han, 2021, Research progress of absorber film of inorganic perovskite solar cells: fabrication techniques and additive engineering in defect passivation, Mater. Sci. Semicond. Process., 127, 105666, 10.1016/j.mssp.2021.105666 Park, 2017, Unravelling additive-based nanocrystal pinning for high efficiency organic-inorganic halide perovskite light-emitting diodes, Nano Energy, 42, 157, 10.1016/j.nanoen.2017.10.012 Zarenezhad, 2020, Efficient carrier utilization induced by conductive polypyrrole additives in organic-inorganic halide perovskite solar cells, Sol. Energy, 207, 1300, 10.1016/j.solener.2020.07.059 Kawano, 2021, Radiation response characteristics of organic–inorganic perovskite-type compounds with a chlorophenethylamine, Mater. Res. Bull., 142, 111409, 10.1016/j.materresbull.2021.111409 Kumar, 2020, Organic-inorganic perovskite-based solar cell designs for high conversion efficiency: a comparative study by SCAPS simulation, Mater. Today Proc., 49, 3081 Ku, 2020, Two-terminal artificial synapse with hybrid organic–inorganic perovskite (CH3NH3)PbI3 and low operating power energy (∼47 fJ/μm2), J. Alloys Compd., 833, 155064, 10.1016/j.jallcom.2020.155064 Wang, 2020, Organic−inorganic hybrid perovskites: game-changing candidates for solar fuel production, Nano Energy, 71, 104647, 10.1016/j.nanoen.2020.104647 Luo, 2018, Fast anion-exchange from CsPbI3 to CsPbBr3 via Br2-vapor-assisted deposition for air-stable all-inorganic perovskite solar cells, Chem. Eng. J., 343, 146, 10.1016/j.cej.2018.03.009 Hu, 2018, Carrier dynamics in CsPbI3 perovskite microcrystals synthesized in solution phase, Chin. Chem. Lett., 29, 699, 10.1016/j.cclet.2017.10.005 Xu, 2021, Engineering bandgap of CsPbI3 over 1.7 eV with enhanced stability and transport properties, iScience, 24, 102235, 10.1016/j.isci.2021.102235 Wu, 2020, High crystallinity and photovoltaic performance of CsPbI3 film enabled by secondary dimension, J. Energy Chem., 48, 181, 10.1016/j.jechem.2020.01.009 Kim, 2020, Graphene-mediated enhanced Raman scattering and coherent light lasing from CsPbI3 perovskite nanorods, Nano Energy, 70, 104497, 10.1016/j.nanoen.2020.104497 Pramchu, 2019, Effects of bromine substitution for iodine on structural stability and phase transition of CsPbI3, Appl. Surf. Sci., 496, 143593, 10.1016/j.apsusc.2019.143593 Sun, 2020, Physical origins of high photoluminescence quantum yield in α-CsPbI3 nanocrystals and their stability, Appl. Surf. Sci., 508, 145188, 10.1016/j.apsusc.2019.145188 Chen, 2021, All-inorganic perovskite CsPbX3 electrospun nanofibers with color-tunable photoluminescence and high performance optoelectronic applications, J. Alloys Compd., 856, 157426, 10.1016/j.jallcom.2020.157426 Fadla, 2020, Insights on the opto-electronic structure of the inorganic mixed halide perovskites γ-CsPb(I1-xBrx)3 with low symmetry black phase, J. Alloys Compd., 832, 154847, 10.1016/j.jallcom.2020.154847 Gao, 2021, Fluorescence enhanced microfluidic sensor with CsPbI3 probe for lubricant copper ions on-site rapid detection based on SiO2 inverse opal photonic crystals, J. Lumin., 238, 118276, 10.1016/j.jlumin.2021.118276 Liu, 2018, Novel CsPbI3 QDs glass with chemical stability and optical properties, J. Eur. Ceram. Soc., 38, 1998, 10.1016/j.jeurceramsoc.2017.10.012 Zhao, 2016, Organic–inorganic hybrid lead halide perovskites for optoelectronic and electronic applications, Chem. Soc. Rev., 45, 655, 10.1039/C4CS00458B Fu, 2017, Selective stabilization and photophysical properties of metastable perovskite polymorphs of CsPbI3 in thin films, Chem. Mater., 29, 8385, 10.1021/acs.chemmater.7b02948 Goldschmidt, 1926, Die gesetze der Krystallochemie, Naturwissenschaften, 14, 477, 10.1007/BF01507527 Liu, 2018, Metal halide perovskites: synthesis, ion migration, and application in field-effect transistors, Small, 14, 1801460, 10.1002/smll.201801460 Vassilakopoulou, 2016, Room temperature light emitting diode based on 2D hybrid organic-inorganic low dimensional perovskite semiconductor, Appl. Mater. Today, 5, 128, 10.1016/j.apmt.2016.09.004 Liu, 2018, Room temperature processing of inorganic perovskite films to enable flexible solar cells, iScience, 6, 272, 10.1016/j.isci.2018.08.005 Dai, 2020, Surface mediated ligands addressing bottleneck of room-temperature synthesized inorganic perovskite nanocrystals toward efficient light-emitting diodes, Nano Energy, 70, 104467, 10.1016/j.nanoen.2020.104467 Tang, 2016, Room temperature single-photon emission and lasing for all-inorganic colloidal perovskite quantum dots, Nano Energy, 28, 462, 10.1016/j.nanoen.2016.08.062 Xiang, 2019, Natrium doping pushes the efficiency of carbon-based CsPbI3 perovskite solar cells to 10.7, iScience, 15, 156, 10.1016/j.isci.2019.04.025 Nam, 2017, Potassium incorporation for enhanced performance and stability of fully inorganic cesium lead halide perovskite solar cells, Nano Lett., 17, 2028, 10.1021/acs.nanolett.7b00050 Guo, 2019, Efficient and hole-transporting-layer-free CsPbI2 Br planar heterojunction perovskite solar cells through rubidium passivation, ChemSusChem, 12, 983, 10.1002/cssc.201802690 Li, 2018, Lattice modulation of alkali metal cations doped Cs1−xRxPbBr3 halides for inorganic perovskite solar cells, Solar RRL, 2, 1800164, 10.1002/solr.201800164 Tan, 2020, Enhancing the optical, morphological and electronic properties of the solution-processed CsPbIBr2 films by Li doping for efficient carbon-based perovskite solar cells, Appl. Surf. Sci., 499, 10.1016/j.apsusc.2019.143990 Wang, 2021, Synthesis and application of perovskite-based photocatalysts in environmental remediation: a review, J. Mol. Liq., 334, 116029, 10.1016/j.molliq.2021.116029 Kumar, 2020, Composition dependent 3C and 6H perovskites, A3MTiSbO9 (A = Sr, Ba; M = Mn, Co): structural, magnetic and dielectric properties, J. Solid State Chem., 282, 121116, 10.1016/j.jssc.2019.121116 Flores, 2019, Comparison of the crystal chemistry of tellurium (VI), molybdenum (VI), and tungsten (VI) in double perovskite oxides and related materials, Prog. Solid State Chem., 56, 100251, 10.1016/j.progsolidstchem.2019.100251 Barad, 2020, Cation distribution and magnetic ordering evolution study on Ca1+xCu3-xTi4O12 (x = 0.0–0.2) perovskites, Solid State Sci., 99, 106070, 10.1016/j.solidstatesciences.2019.106070 Rudd, 2019, Metal ions in halide perovskite materials and devices, Trends Chem., 1, 394, 10.1016/j.trechm.2019.04.010 Tang, 2019, Toward efficient and air-stable carbon-based all-inorganic perovskite solar cells through substituting CsPbBr3 films with transition metal ions, Chem. Eng. J., 375, 10.1016/j.cej.2019.121930 Guo, 2020, Growth control and defect passivation toward efficient and low-temperature processed carbon based CsPbIBr2 solar cell, Org. Electron., 83, 10.1016/j.orgel.2020.105731 Mir, 2019, Postsynthesis Mn-doping in CsPbI3 nanocrystals to stabilize the black perovskite phase, Nanoscale, 11, 4278, 10.1039/C9NR00248K Wu, 2016, Effects of Nb doping on the microstructure, ferroelectric and piezoelectric properties of 0.7BiFeO3–0.3BaTiO3 lead-free ceramics, Bull. Mater. Sci., 39, 737, 10.1007/s12034-016-1198-7 Guo, 2019, Niobium incorporation into CsPbI2Br for stable and efficient all-inorganic perovskite solar cells, ACS Appl. Mater. Interfaces, 11, 19994, 10.1021/acsami.9b03622 Baopeng, 1992, Synthesis and structure of AEuI3 (ARb, Cs) and AEu2I5 (AK, Rb, Cs), J. Alloys Compd., 181, 511, 10.1016/0925-8388(92)90348-D Wu, 2018, CH3NH3Pb1−xEuxI3 mixed halide perovskite for hybrid solar cells: the impact of divalent europium doping on efficiency and stability, RSC Adv., 8, 11095, 10.1039/C7RA12754E Jena, 2018, Stabilization of α-CsPbI3 in ambient room temperature conditions by incorporating Eu into CsPbI3, Chem. Mater., 30, 6668, 10.1021/acs.chemmater.8b01808 Xiang, 2019, Europium-doped CsPbI2Br for stable and highly efficient inorganic perovskite solar cells, Joule, 3, 205, 10.1016/j.joule.2018.10.008 Yan, 2020, Tuning the optical properties of Cs2SnCl6:Bi and Cs2SnCl6:Sb lead-free perovskites via post-annealing for white LEDs, J. Alloys Compd., 822, 153528, 10.1016/j.jallcom.2019.153528 Zhao, 2018, First-principles study of electronic and optical properties of lead-free double perovskites Cs2NaBX6 (B = Sb, Bi; X = Cl, Br, I), J. Phys. Chem. Solid., 117, 117, 10.1016/j.jpcs.2018.02.032 Chern, 1992, Synthesis, structure, and properties of anti-perovskite nitrides Ca3MN, M=P, As, Sb, Bi, Ge, Sn, and Pb, J. Solid State Chem., 96, 415, 10.1016/S0022-4596(05)80276-2 Wang, 2021, Illumination durability and high-efficiency Sn-based perovskite solar cell under coordinated control of phenylhydrazine and halogen ions, Matter, 4, 709, 10.1016/j.matt.2020.11.012 Yang, 2016, Stabilized wide bandgap perovskite solar cells by tin substitution, Nano Lett., 16, 7739, 10.1021/acs.nanolett.6b03857 Koliogiorgos, 2018, Electronic and gap properties of Sb and Bi based halide perovskites: an ab-initio study, Comput. Cond. Matter, 14, 161, 10.1016/j.cocom.2018.02.001 Rahmani, 2021, Realizing ferromagnetic insulators in electron doped double perovskites Sr2-xAxMnVO6; A = Sn, Bi, J. Magn. Magn Mater., 519, 167492, 10.1016/j.jmmm.2020.167492 Kang, 2019, Influence of Bi doping on physical properties of lead halide perovskites: a comparative first-principles study between CsPbI3 and CsPbBr3, Mater.Today Adv., 3, 100019, 10.1016/j.mtadv.2019.100019 Kim, 2021, A-site cation off-centering contribution on ferroelectricity and piezoelectricity in pseudo-cubic perovskite structure of Bi-based lead-free piezoelectrics, Scripta Mater., 205, 114176, 10.1016/j.scriptamat.2021.114176 Hu, 2017, Bismuth incorporation stabilized α-CsPbI3 for fully inorganic perovskite solar cells, ACS Energy Lett., 2, 2219, 10.1021/acsenergylett.7b00508 Xiang, 2018, The synergistic effect of non-stoichiometry and Sb-doping on air-stable alpha-CsPbI3 for efficient carbon-based perovskite solar cells, Nanoscale, 10, 9996, 10.1039/C7NR09657G Liang, 2017, CsPb0.9Sn0.1IBr2 based all-inorganic perovskite solar cells with exceptional efficiency and stability, J. Am. Chem. Soc., 139, 14009, 10.1021/jacs.7b07949 Liang, 2019, Defect-engineering-Enabled high-efficiency all-inorganic perovskite solar cells, Adv. Mater., 31, 10.1002/adma.201903448 Liang, 2018, Enhancing optical, electronic, crystalline, and morphological properties of cesium lead halide by Mn substitution for high-stability all-inorganic perovskite solar cells with carbon electrodes, Adv. Energy Mater., 8, 10.1002/aenm.201800504 Chen, 2021, Design of low bandgap CsPb1−xSnxI2Br perovskite solar cells with excellent phase stability, Small, 17, 2101380, 10.1002/smll.202101380 Long, 2021, Zinc ion functional doping for all-inorganic planar CsPbIBr2 perovskite solar cells with efficiency over 10.5%, J. Mater. Chem. C, 9, 2145, 10.1039/D0TC05455K Li, 2018, Surface passivation engineering strategy to fully-inorganic cubic CsPbI3 perovskites for high-performance solar cells, Nat. Commun., 9, 1076, 10.1038/s41467-018-03169-0 Zhang, 2017, Bication lead iodide 2D perovskite component to stabilize inorganic α-CsPbI3 perovskite phase for high-efficiency solar cells, Sci. Adv., 3, 10.1126/sciadv.1700841 Ding, 2018, Triple cation additive NH3+C2H4NH2+C2H4NH3+-induced phase-stable inorganic α-CsPbI3 perovskite films for use in solar cells, J. Mater. Chem., 6, 18258, 10.1039/C8TA04590A Huang, 2019, One-step solution deposition of CsPbBr3 based on precursor engineering for efficient all-inorganic perovskite solar cells, J. Mater. Chem., 7, 22420, 10.1039/C9TA08465G Eperon, 2015, Inorganic caesium lead iodide perovskite solar cells, J. Mater. Chem., 3, 19688, 10.1039/C5TA06398A Xiang, 2018, Highly air-stable carbon-based α-CsPbI3 perovskite solar cells with a broadened optical spectrum, ACS Energy Lett., 3, 1824, 10.1021/acsenergylett.8b00820 Haque, 2018, Effects of hydroiodic acid concentration on the properties of CsPbI3 perovskite solar cells, ACS Omega, 3, 11937, 10.1021/acsomega.8b01589 Wang, 2018, All-inorganic cesium lead iodide perovskite solar cells with stabilized efficiency beyond 15, Nat. Commun., 9, 4544, 10.1038/s41467-018-06915-6 Luo, 2016, Solvent engineering for ambient-air-processed, phase-stable CsPbI3 in perovskite solar cells, J. Phys. Chem. Lett., 7, 3603, 10.1021/acs.jpclett.6b01576 Jiang, 2018, Reduced-dimensional α-CsPbX3 perovskites for efficient and stable photovoltaics, Joule, 2, 1356, 10.1016/j.joule.2018.05.004 Ke, 2018, Myths and reality of HPbI3 in halide perovskite solar cells, Nat. Commun., 9, 4785, 10.1038/s41467-018-07204-y Pei, 2019, Unveiling property of hydrolysis-derived DMAPbI3 for perovskite devices: composition engineering, defect mitigation, and stability optimization, iScience, 15, 165, 10.1016/j.isci.2019.04.024 Wang, 2019, The role of dimethylammonium iodide in CsPbI3 perovskite fabrication: additive or dopant?, Angew Chem. Int. Ed. Engl., 58, 16691, 10.1002/anie.201910800 Meng, 2019, Chemical composition and phase evolution in DMAI-derived inorganic perovskite solar cells, ACS Energy Lett., 5, 263, 10.1021/acsenergylett.9b02272 Bian, 2020, Unveiling the effects of hydrolysis-derived DMAI/DMAPbI x intermediate compound on the performance of CsPbI3 solar cells, Adv. Sci., 7, 1902868, 10.1002/advs.201902868 Zhao, 2018, Thermodynamically stable orthorhombic gamma-CsPbI3 thin films for high-performance photovoltaics, J. Am. Chem. Soc., 140, 11716, 10.1021/jacs.8b06050 Wang, 2021, In-situ hot oxygen cleansing and passivation for all-inorganic perovskite solar cells deposited in ambient to breakthrough 19% efficiency, Adv. Funct. Mater., 31, 2101568, 10.1002/adfm.202101568 Bai, 2017, Dimensional engineering of a graded 3D–2D halide perovskite interface enables ultrahigh Voc enhanced stability in the p-i-n photovoltaics, Adv. Energy Mater., 7, 1701038, 10.1002/aenm.201701038 Li, 2018, Tailored dimensionality to regulate the phase stability of inorganic cesium lead iodide perovskites, Nanoscale, 10, 6318, 10.1039/C8NR00758F Wang, 2019, Ruddlesden–popper 2D component to stabilize γ-CsPbI3 perovskite phase for stable and efficient photovoltaics, Adv. Energy Mater., 9, 10.1002/aenm.201902529 Liao, 2017, Dimension engineering on cesium lead iodide for efficient and stable perovskite solar cells, J. Mater. Chem., 5, 2066, 10.1039/C6TA09582H Wang, 2019, Skillfully deflecting the question: a small amount of piperazine-1,4-diium iodide radically enhances the thermal stability of CsPbI3 perovskite, J. Mater. Chem. C, 7, 11757, 10.1039/C9TC03576A Lee, 2021, Influence of spin-coating methods on the properties of planar solar cells based on ambient-air-processed triple-cation mixed-halide perovskites, J. Alloys Compd., 879, 160373, 10.1016/j.jallcom.2021.160373 Chaudhary, 2020, Enhanced performance of perovskite photodetectors fabricated by two-step spin coating approach, Mater. Sci. Semicond. Process., 109, 104916, 10.1016/j.mssp.2020.104916 Feng, 2018, Towards efficient perovskite light-emitting diodes: a multi-step spin-coating method for a dense and uniform perovskite film, Org. Electron., 61, 18, 10.1016/j.orgel.2018.06.052 Gao, 2020, High efficiently CsPbBr3 perovskite solar cells fabricated by multi-step spin coating method, Sol. Energy, 211, 1223, 10.1016/j.solener.2020.10.045 Duan, 2018, High-purity inorganic perovskite films for solar cells with 9.72 % efficiency, Angew Chem. Int. Ed. Engl., 57, 3787, 10.1002/anie.201800019 Wang, 2018, Solvent-controlled growth of inorganic perovskite films in dry environment for efficient and stable solar cells, Nat. Commun., 9, 2225, 10.1038/s41467-018-04636-4 Kim, 2017, Cesium lead iodide solar cells controlled by annealing temperature, Phys. Chem. Chem. Phys., 19, 6257, 10.1039/C6CP08177K Liu, 2019, Boosting the efficiency of carbon-based planar CsPbBr3 perovskite solar cells by a modified multistep spin-coating technique and interface engineering, Nano Energy, 56, 184, 10.1016/j.nanoen.2018.11.053 Zhang, 2015, Controllable sequential deposition of planar CH3NH3PbI3 perovskite films via adjustable volume expansion, Nano Lett., 15, 3959, 10.1021/acs.nanolett.5b00843 Zhao, 2020, Precise stress control of inorganic perovskite films for carbon-based solar cells with an ultrahigh voltage of 1.622 V, Nano Energy, 67, 10.1016/j.nanoen.2019.104286 Li, 2021, Laser induced anti-solvent carbon quantum dots in defect passivation for effective perovskite solar cells, J. Alloys Compd., 161561, 10.1016/j.jallcom.2021.161561 Li, 2021, Laser fabricated carbon quantum dots in anti-solvent for highly efficient carbon-based perovskite solar cells, J. Colloid Interface Sci., 600, 691, 10.1016/j.jcis.2021.05.034 Dong, 2019, Anti-solvent assisted multi-step deposition for efficient and stable carbon-based CsPbI2Br all-inorganic perovskite solar cell, Nano Energy, 59, 553, 10.1016/j.nanoen.2019.02.075 Liu, 2021, An in-situ defect passivation through a green anti-solvent approach for high-efficiency and stable perovskite solar cells, Sci. Bull., 66, 1419, 10.1016/j.scib.2021.03.018 Liu, 2019, Perovskite films grown with green mixed anti-solvent for highly efficient solar cells with enhanced stability, Sol. Energy, 181, 285, 10.1016/j.solener.2019.02.020 Liu, 2019, Novel antisolvent-washing strategy for highly efficient carbon-based planar CsPbBr3 perovskite solar cells, J. Power Sources, 439, 10.1016/j.jpowsour.2019.227092 Dong, 2018, A green anti-solvent process for high performance carbon-based CsPbI2 Br all-inorganic perovskite solar cell, Solar RRL, 2, 10.1002/solr.201800139 Teng, 2018, Elegant face-down liquid-space-restricted deposition of CsPbBr3 films for efficient carbon-based all-inorganic planar perovskite solar cells, ACS Appl. Mater. Interfaces, 10, 9541, 10.1021/acsami.8b00358 Liu, 2019, Growing high-quality CsPbBr3 by using porous CsPb2Br5 as an intermediate: a promising light absorber in carbon-based perovskite solar cells, Sustain. Energy Fuels, 3, 184, 10.1039/C8SE00442K Xiang, 2020, Universal defects elimination for high performance thermally evaporated CsPbBr3 perovskite solar cells, Sol. Energy Mater. Sol. Cell., 206, 110317, 10.1016/j.solmat.2019.110317 Shi, 2021, Thermal evaporated CuI film thickness-dependent performance of perovskite solar cells, Vacuum, 187, 110076, 10.1016/j.vacuum.2021.110076 Lin, 2021, The selection strategy of ammonium-group organic salts in vapor deposited perovskites: from dimension regulation to passivation, Nano Energy, 84, 105893, 10.1016/j.nanoen.2021.105893 Xu, 2021, Tin-based all-inorganic perovskite photodetectors fabricated by chemical vapor deposition, Phys. E Low-dimens. Syst. Nanostruct., 134, 114843, 10.1016/j.physe.2021.114843 Duan, 2018, Spray-assisted deposition of CsPbBr3 films in ambient air for large-area inorganic perovskite solar cells, Mater. Today Energy, 10, 146, 10.1016/j.mtener.2018.09.001 Chen, 2017, All-vacuum-deposited stoichiometrically balanced inorganic cesium lead halide perovskite solar cells with stabilized efficiency exceeding 11, Adv. Mater., 29, 10.1002/adma.201605290 Yonezawa, 2017, Annealing effects on CsPbI3-based planar heterojunction perovskite solar cells formed by vacuum deposition method, Jpn. J. Appl. Phys., 56, 10.7567/JJAP.56.04CS11 Hutter, 2017, Vapour-deposited cesium lead iodide perovskites: microsecond charge carrier lifetimes and enhanced photovoltaic performance, ACS Energy Lett., 2, 1901, 10.1021/acsenergylett.7b00591 Tong, 2019, Phase transition induced recrystallization and low surface potential barrier leading to 10.91%-efficient CsPbBr3 perovskite solar cells, Nano Energy, 65, 10.1016/j.nanoen.2019.104015 Li, 2019, All-inorganic CsPbBr3 perovskite solar cells with 10.45% efficiency by evaporation-assisted deposition and setting intermediate energy levels, ACS Appl. Mater. Interfaces, 11, 29746, 10.1021/acsami.9b06356 Lau, 2016, CsPbIBr2 perovskite solar cell by spray-assisted deposition, ACS Energy Lett., 1, 573, 10.1021/acsenergylett.6b00341