Ductility enhancement of additively manufactured CoCrMo alloy via residual stress tailored high stacking fault probability

Hedberg, 2014, In vitro biocompatibility of CoCrMo dental alloys fabricated by selective laser melting, Dent. Mater., 30, 525, 10.1016/j.dental.2014.02.008 Sun, 2014, Build direction dependence of microstructure and high-temperature tensile property of Co–Cr–Mo alloy fabricated by electron beam melting, Acta Mater., 64, 154, 10.1016/j.actamat.2013.10.017 Song, 2018, Morphology and properties of CoCrMo parts fabricated by selective laser melting, Mater. Sci. Eng. A, 713, 206, 10.1016/j.msea.2017.12.035 Li, 2022, Additive manufacturing of a Co-Cr-W alloy by selective laser melting: in-situ oxidation, precipitation and the corresponding strengthening effects, J. Mater. Sci. Technol., 125, 171, 10.1016/j.jmst.2022.01.036 Roudnická, 2021, Heat treatment of laser powder-bed-fused Co–28Cr–6Mo alloy to remove its microstructural instability by massive FCC→HCP transformation, Addit. Manuf., 47 Wang, 2021, Additive manufacturing of a martensitic Co–Cr–Mo alloy: towards circumventing the strength–ductility trade-off, Addit. Manuf., 37 Zhang, 2023, Enhancing the mechanical property of laser powder bed fusion CoCrMo alloy by tailoring the microstructure and phase constituent, Mater. Sci. Eng. A, 862, 10.1016/j.msea.2022.144449 Wei, 2019, On microstructural homogenization and mechanical properties optimization of biomedical Co-Cr-Mo alloy additively manufactured by using electron beam melting, Addit. Manuf., 28, 215 Koizumi, 2013, Strain-induced martensitic transformation near twin boundaries in a biomedical Co–Cr–Mo alloy with negative stacking fault energy, Acta Mater, 61, 1648, 10.1016/j.actamat.2012.11.041 Li, 2022, In-situ manipulating microstructure of CoCrMo alloy using selective laser melting with a novel scanning strategy, Scripta Mater., 210, 10.1016/j.scriptamat.2021.114468 Yamanaka, 2014, Effects of nitrogen addition on microstructure and mechanical behavior of biomedical Co-Cr-Mo alloys, J. Mech. Behav. Biomed. Mater., 29, 417, 10.1016/j.jmbbm.2013.10.006 Im, 2022, Effect of phase transformation on the mechanical properties of the Co-Cr-Mo alloy fabricated by selective laser melting, Mater. Charact., 186, 10.1016/j.matchar.2022.111767 Sage, 1950, Méthode d'analyse quantitative des variétés allotropiques du cobalt par les rayons X, Rev. Met. Paris, 47, 139, 10.1051/metal/195047020139 Williamson, 1953, X-ray line broadening from filed aluminium and wolfram, Acta Metall., 1, 22, 10.1016/0001-6160(53)90006-6 Woo, 2023, Competitive strengthening between dislocation slip and twinning in cast-wrought and additively manufactured CrCoNi medium entropy alloys, Acta Mater., 246, 10.1016/j.actamat.2023.118699 Fleming, 2020, The effect of melt temperature on the mechanical properties of cast ASTM F75 CoCrMo alloy as explained by nitrogen and oxygen content, J. Mater. Res. Technol., 9, 9479, 10.1016/j.jmrt.2020.06.079 Takaichi, 2013, Microstructures and mechanical properties of Co-29Cr-6Mo alloy fabricated by selective laser melting process for dental applications, J. Mech. Behav. Biomed. Mater., 21, 67, 10.1016/j.jmbbm.2013.01.021 Yoda, 2012, Effects of chromium and nitrogen content on the microstructures and mechanical properties of as-cast Co-Cr-Mo alloys for dental applications, Acta Biomater., 8, 2856, 10.1016/j.actbio.2012.03.024 Guoqing, 2018, Effect of heat treatment on the properties of CoCrMo alloy manufactured by selective laser melting, J. Mater. Eng. Perform., 27, 2281, 10.1007/s11665-018-3351-5 Sing, 2020, Effect of solution heat treatment on microstructure and mechanical properties of laser powder bed fusion produced cobalt-28chromium-6molybdenum, Mater. Sci. Eng. A, 769, 10.1016/j.msea.2019.138511 Kim, 2020, Effect of building direction on the mechanical anisotropy of biocompatible Co–Cr–Mo alloy manufactured by selective laser melting process, J. Alloys Compd., 834, 10.1016/j.jallcom.2020.155055 Wei, 2020, Microstructures and mechanical properties of dental Co-Cr-Mo-W alloys fabricated by selective laser melting at different subsequent heat treatment temperatures, Metall. Mater. Trans. A, 51, 3205, 10.1007/s11661-020-05719-y Lu, 2019, Characterization of lattice defects and tensile deformation of biomedical Co29Cr9W3Cu alloy produced by selective laser melting, Addit. Manuf., 30 Ye, 2022, The effect of solution and aging treatments on the microstructure and mechanical properties of a selective laser melted CoCrMo alloy, J. Mater. Sci., 57, 6445, 10.1007/s10853-022-07047-5 AlMangour, 2020, Effect of processing parameters on the microstructure and mechanical properties of Co–Cr–Mo alloy fabricated by selective laser melting, Mater. Sci. Eng. A, 792, 10.1016/j.msea.2020.139456 Qian, 2015, Defects-tolerant Co-Cr-Mo dental alloys prepared by selective laser melting, Dent. Mater., 31, 1435, 10.1016/j.dental.2015.09.003 Zhou, 2020, Microstructure evolution and mechanical properties improvement of selective laser melted Co-Cr biomedical alloys during subsequent heat treatments, J. Alloys Compd., 840, 10.1016/j.jallcom.2020.155664 Yamanaka, 2013, Nanoarchitectured Co-Cr-Mo orthopedic implant alloys: nitrogen-enhanced nanostructural evolution and its effect on phase stability, Acta Biomater, 9, 6259, 10.1016/j.actbio.2012.12.013 Qiu, 2020, Influence of lattice distortion on stacking fault energies of CoCrFeNi and Al-CoCrFeNi high entropy alloys, J. Alloys Compd., 846, 10.1016/j.jallcom.2020.156321 Donkor, 2020, Accelerated γ-face-centered cubic to ε-hexagonal close packed massive transformation in a laser powder bed fusion additively manufactured Co-29Cr-5Mo alloy, Scripta Mater., 179, 65, 10.1016/j.scriptamat.2020.01.012 Kok, 2018, Anisotropy and heterogeneity of microstructure and mechanical properties in metal additive manufacturing: a critical reiview, Mater. Design, 139, 565, 10.1016/j.matdes.2017.11.021