Ductility demands on buckling-restrained braced frames under earthquake loading

American Institute of Steel Construction (2001), Manual of Steel Construction — Load and Resistance Factor Design, 3rd Edition.

American Institute of Steel Construction (2002), Seismic Provisions for Structural Steel Buildings.

American Institute of Steel Construction/Structural Engineers Association of California (2001), Recommended Provisions for Buckling-Restrained Braced Frames, (draft).

Black CJ, Makris N and Aiken ID (2002), “Component Testing, Stability Analysis and Characterization of Buckling Restrained ‘Unbonded’ Braces,” Technical Report PEER 2002/08, Pacific Earthquake Engineering Research Center, University of California, Berkeley, CA.

Clark P, Kasai K, Aiken ID and Kimura I (2000), “Evaluation of Design Methodologies for Structures Incorporating Steel Unbonded Braces for Energy Dissipation,” Proceedings of the 12 th World Conference on Earthquake Engineering, Upper Hut, New Zealand, Paper No. 2240.

Fahnestock LA, Ricles JM and Sause R (2004), “Refined Inelastic Truss Bar Element (Type 01) with Isotropic Hardening for DRAIN-2DX, Element Description and User Guide,” ATLSS Report in preparation, Lehigh University, Bethlehem, PA.

Federal Emergency Management Agency (2000a), NEHRP Recommended Provisions for Seismic Regulations for New Buildings and Other Structures, Part 1 - Provisions, FEMA 368, Washington, D.C.

Federal Emergency Management Agency (2000b), NEHRP Recommended Provisions for Seismic Regulations for New Buildings and Other Structures, Part 2 - Commentary, FEMA 369, Washington, D.C.

Garlock M (2002), “Full Scale Testing, Seismic Analysis, and Design of Post-Tensioned Seismically Resistant Connections for Steel Frames,” Ph.D. dissertation, Lehigh University, Bethlehem, PA.

International Code Council (2000), International Building Code, Falls Church, VA.

Iwata M, Kato T and Wada A (2003), “Performance Evaluation of Buckling-Restrained Braces in Damage-Controlled Structures,” Behavior of Steel Structures in Seismic Areas, Proceedings of the 4 th International Conference STESSA 2003, Mazzolani, F. (ed.), Naples, Italy, June 9–12, pp. 37–43.

Iwata M, Kato T and Wada A (2000), “Buckling-Restrained Braces as Hysteretic Dampers,” Behavior of Steel Structures in Seismic Areas, Proceedings of the 3 rd International Conference STESSA 2000, Mazzolani, F., and Tremblay, R. (ed.), Montreal, Canada, August 21–24, pp. 33–38.

Lopez W, Gwie D, Saunders M and Lauck T (2002), “Lessons Learned from Large-Scale Tests of Unbonded Braced Frame Subassemblage,” Proceedings, SEAOC 71 st Annual Convention.

Merritt S, Uang CM and Benzoni G (2003a), “Subassemblage Testing of CoreBrace Buckling-Restrained Braces,” Structural Systems Research Project, Report No. TR-2003/01, University of California, San Diego.

Merritt S, Uang CM and Benzoni G (2003b), “Subassemblage Testing of Star Seismic Buckling-Restrained Braces,” Structural Systems Research Project, Report No. TR-2003/04, University of California, San Diego.

Newmark NM and Hall WJ (1982), Earthquake Spectra and Design, Earthquake Engineering Research Institute, El Cerrito, CA.

Pacific Earthquake Engineering Research Center (2000), “Pacific Earthquake Engineering Research Center Strong Motion Database,” http://peer.berkeley.edu/smcat/.

Prakash V, Powell GH and Campbell S (1993), “DRAIN-2DX Base Program Description and User Guide — Version 1.10,” Report No. UCB/SEMM-93/17 and 18, Structural Engineering Mechanics and Materials, Department of Civil Engineering, University of California, Berkeley, CA.

Ricles JM and Popov EP (1994), “Inelastic Link Element for EBF Seismic Analysis,” Journal of Structural Engineering, ASCE, 120 (2): 441–463.

Rojas P (2003), “Seismic Analysis, Design, and Evaluation of Post-Tensioned Friction Damped Connections for Steel Moment Resisting Frames,” Ph.D. dissertation, Lehigh University, Bethlehem, PA.

Sabelli R (2001), “Research on Improving the Design and Analysis of Earthquake-Resistant Steel Braced Frames,” The 2000 NEHRP Professional Fellowship Report, Earthquake Engineering Research Institute, Oakland, CA.

Sabelli R and Aiken I (2003), “Development of Building Code Provisions for Buckling-Restrained Braced Frames,” Behavior of Steel Structures in Seismic Areas, Proceedings of the 4 th International Conference STESSA 2003, Mazzolani, F. (ed.), Naples, Italy, June 9–12, pp. 813–818.

Somerville P, Smith N, Punyamurthula S and Sun J (1997), “Development of Ground Motion Time Histories for Phase 2 of the FEMA/SAC Steel Project,” SAC Background Document SAC/BD-97/04, SAC Joint Venture, Sacramento, CA.

Tremblay R, Degrange G and Blouin J (1999), “Seismic Rehabilitation of a Four-Storey Building with a Stiffened Bracing System,” Proceedings, 8 th Canadian Conference on Earthquake Engineering, Vancouver, British Columbia, Canada.

Tsai KC, Loh CH, Hwang YC and Weng CS (2003), “Seismic Retrofit of Building Structures with Dampers in Taiwan,” Symposium of Seismic Retrofit of Buildings and Bridges with Base Isolation and Dampers, Kyoto University, Japan.

Uang CM (1991), “Establishing R (or Rw) and Cd Factors for Building Seismic Provisions,” Journal of Structural Engineering, ASCE, 117(1): 19–28.

Uang CM and Maarouf A (1994), “Deflection Amplification Factor for Seismic Design Provisions,” Journal of Structural Engineering, ASCE, 120(8): 2423–2436.

Usami T, Kasai A and Kato M (2003), “Behavior of Buckling-Restrained Brace Members,” Behavior of Steel Structures in Seismic Areas, Proceedings of the 4 th International Conference STESSA 2003, Mazzolani, F. (ed.), Naples, Italy, June 9–12, pp. 211–216.

Watanabe A, Hitomi Y, Saeki E, Wada A and Fujimoto M (1988), “Properties of Brace Encased in Buckling-Restraining Concrete and Steel Tube,” Proceedings of the 9 th World Conference on Earthquake Engineering, Tokyo-Kyoto, Japan.