Dry sliding tribological behaviors of nanocrystalline Cu–Zn surface layer after annealing in air

Sadykov, 1999, Wear of copper and its alloys with submicrocrystalline structure, Wear, 225–229, 649, 10.1016/S0043-1648(98)00374-3 Sadykov, 1999, The influence of strain-heat processing on copper wear, Wear, 212, 160, 10.1016/S0043-1648(97)00164-6 Prasad, 2002, Lubricious zinc oxide films grown by pulsed laser deposition: lateral force microscopy of wear surfaces, J. Mater. Sci. Lett., 19, 1979, 10.1023/A:1026790330643 Liu, 1997, Wear resistance of laser processed Al–Si–graphitep composites, Wear, 206, 83, 10.1016/S0043-1648(96)07496-0 Zhong, 2001, Mechanical properties of Ti–B–C–N coatings deposited by magnetron sputtering, Thin Solid Films, 398–399, 320, 10.1016/S0040-6090(01)01344-X Voevodin, 1999, Nanocomposites tribological coatings for aerospace applications, Surf. Coat. Technol., 116–119, 36, 10.1016/S0257-8972(99)00228-5 Prasad, 2000, Tribology of tungsten disulfide-nanocrystalline zinc oxide adaptive lubricant films from ambient to 500°C, Wear, 237, 186, 10.1016/S0043-1648(99)00329-4 Uvarova, 2000, Ultrafine and nanophased powders as the fillers in composite coatings, J. Adv. Mater., 32, 26 Alexandrov, 1998, Microstructures and properties of nanocomposites obtained through SPTS consolidation of powders, Metall. Mater. Trans. A, 29, 2253, 10.1007/s11661-998-0103-4 Li, 1999, Mechanical mixing induced by sliding wear of an Al–Si alloy against M2 steel, Wear, 225–229, 640, 10.1016/S0043-1648(99)00021-6 Sahin, 1996, Wear performance of aluminium alloy composites containing unidirectionally oriented silicon carbide coated boron fibres, Wear, 197, 248, 10.1016/0043-1648(96)06959-1 Minamino, 1996, Diffusion of copper in nanocrystalline Al–7.8at.% Ti–0.3at.% Fe alloy prepared by mechanical alloying, Mater. Trans. JIM, 37, 130, 10.2320/matertrans1989.37.130