Drift-flux model for upward dispersed two-phase flows in vertical medium-to-large round tubes

Andersen, 1983 2017 Baily, 1956, Transport of gases through liquid-gas mixture Borkowski, 1992 Brooks, 2012, Interfacial drag force in one-dimensional two-fluid model, Prog. Nucl. Energy, 61, 57, 10.1016/j.pnucene.2012.07.001 Brooks, 2012, Two-group drift-flux model for closure of the modified two-fluid model, Int. J. Heat Fluid Flow, 37, 196, 10.1016/j.ijheatfluidflow.2012.04.002 Carver, 1981 Clark, 1986, The effect of varying gas voidage distributions on average holdup in vertical bubble flow, Int. J. Multiphas. Flow, 12, 299, 10.1016/0301-9322(86)90032-7 Clark, 1985, Predicting the holdup in two-phase bubble upflow and downflow using the Zuber and Findlay drift-flux model, AIChE J., 31, 500, 10.1002/aic.690310323 Hashemi, 1986, Effect of diameter and geometry on two-phase flow regimes and carry-over in a model PWR hot leg, 2443 Hibiki, 2019, One-dimensional drift-flux correlations for two-phase flow in medium-size channels, Exp Comput Multiph Flow, 1, 85, 10.1007/s42757-019-0009-y Hibiki, 2003, One-dimensional drift--flux model for two-phase flow in a large diameter pipe, Int. J. Heat Mass Tran., 46, 1773, 10.1016/S0017-9310(02)00473-8 Hibiki, 2002, Distribution parameter and drift velocity of drift-flux model in bubbly flow, Int. J. Heat Mass Tran., 45, 707, 10.1016/S0017-9310(01)00195-8 Hibiki, 2002, Interfacial area concentration of bubbly flow systems, Chem. Eng. Sci., 57, 3967, 10.1016/S0009-2509(02)00263-4 Hibiki, 2000, Experimental study on hot-leg U-bend two-phase natural circulation in a loop with a large diameter pipe, Nucl. Eng. Des., 195, 69, 10.1016/S0029-5493(99)00176-4 Hibiki, 2000, Two-group interfacial area transport equations at bubbly-to-slug flow transition, Nucl. Eng. Des., 202, 39, 10.1016/S0029-5493(00)00286-7 Hibiki, 1999, Experimental study on interfacial area transport in bubbly two-phase flows, Int. J. Heat Mass Tran., 42, 3019, 10.1016/S0017-9310(99)00014-9 Hibiki, 2001, Axial interfacial area transport of vertical bubbly flows, Int. J. Heat Mass Tran., 44, 1869, 10.1016/S0017-9310(00)00232-5 Hibiki, 2022, Channel size effect on drift-flux parameters for adiabatic and boiling two-phase flows, Int. J. Heat Mass Tran., 185, 10.1016/j.ijheatmasstransfer.2021.122410 Hibiki, 2000, Study on flow characteristics in gas-molten metal mixture pool, Nucl. Eng. Des., 196, 233, 10.1016/S0029-5493(99)00293-9 Hills, 1976, The operation of a bubble column at high throughputs: I. Gas holdup measurement, Chem. Eng. J., 12, 89, 10.1016/0300-9467(76)87002-5 Hotta, 2004, Application of TRAC/BF1-ENTRÉE-NASCA to OECD NEA/NSC BWR turbine trip benchmark, Nucl. Sci. Eng., 148, 208, 10.13182/NSE04-A2452 Hsu, 1998, Experimental study on two-phase natural circulation and flow termination in a loop, Nucl. Eng. Des., 186, 395, 10.1016/S0029-5493(98)00285-4 Ishii, 1977, 77 Ishii, 2011 Kataoka, 1987, Drift flux model for large diameter pipe and new correlation for pool void fraction, Int. J. Heat Mass Tran., 30, 1927, 10.1016/0017-9310(87)90251-1 Kawanishi, 1990, An experimental study on drift flux parameters for two-phase flow in vertical round tubes, Nucl. Eng. Des., 120, 447, 10.1016/0029-5493(90)90394-D Khan, 2000, Two-phase bubbly flow simulation using CFD method: a review of models for interfacial forces, Prog. Nucl. Energy, 125 Kitscha, 1989, Breakup criteria for fluid particles, Int. J. Multiphas. Flow, 15, 573, 10.1016/0301-9322(89)90054-2 Kocamustafaogullari, 1985, Maximum fluid particle size for bubbles and drops, Fed. Times, vol. 29, 99 Komuro, 2022, Validation of three-dimensional simulation method for two-phase flow in triangular-pitch tube bundle in secondary side of steam generators on porous two-fluid model, J. Nucl. Sci. Technol., 59, 78, 10.1080/00223131.2021.1954102 Marchaterre, 1956 Maurer, 1956, vol. 19 Moorthi, 2018, A review of sub-channel thermal hydraulic codes for nuclear reactor core and future directions, Nucl. Eng. Des., 332, 329, 10.1016/j.nucengdes.2018.03.012 2008 Omebere-Iyari, 2008, The characteristics of gas/liquid flow in large risers at high pressures, Int. J. Multiphas. Flow, 34, 461, 10.1016/j.ijmultiphaseflow.2007.11.001 Salko, 2019 Schlegel, 2014, Local flow structure beyond bubbly flow in large diameter channels, Int. J. Heat Fluid Flow, 47, 42, 10.1016/j.ijheatfluidflow.2014.03.001 Sharma, 2017, Turbulence-induced bubble collision force modeling and validation in adiabatic two-phase flow using CFD, Nucl. Eng. Des., 312, 399, 10.1016/j.nucengdes.2016.05.006 Sharma, 2017, An interfacial shear term evaluation study for adiabatic dispersed air-water two-phase flow with the two-fluid model using CFD, Nucl. Eng. Des., 312, 389, 10.1016/j.nucengdes.2016.08.032 Shen, 2015, Bubbly-to-cap bubbly flow transition in a long-26 m vertical large diameter pipe at low liquid flow rate, Int. J. Heat Fluid Flow, 52, 140, 10.1016/j.ijheatfluidflow.2015.01.001 Shipley, 1984, Two phase flow in large diameter pipes, Chem. Eng. Sci., 39, 163, 10.1016/0009-2509(84)80143-8 Singhal, 1982, ATHOS: a computer program for thermal-hydraulic analysis of steam generators, Mathematical and Physical Models and Method of Solution, ume 1 St Pierre, 1965 1998 Yeoh, 2019, Thermal hydraulic considerations of nuclear reactor systems: past, present and future challenges, Exp Comput Multiph Flow, 1, 3, 10.1007/s42757-019-0002-5 Zuber, 1965, Average volumetric concentration in two-phase flow systems, J. Heat Tran., 87, 453, 10.1115/1.3689137