Nội dung được dịch bởi AI, chỉ mang tính chất tham khảo
Keo dẫn điện trong nước, phương pháp thử nghiệm, tính chất và ứng dụng. Một đánh giá
Tóm tắt
Bài báo trình bày các đặc tính của keo dẫn điện do các nhà phát triển trong nước chế tạo. Vai trò của chất độn trong việc cung cấp các tính chất dẫn điện cho keo được chỉ ra. Thông tin về việc sử dụng keo dẫn điện cũng được cung cấp.
Từ khóa
#keo dẫn điện #tính chất #phương pháp thử nghiệm #ứng dụngTài liệu tham khảo
F. F. Bazarova and L. S. Kolesova, Adhesives in the Production of Radio Electronic Equipment (Energiya, Moscow, 1975) [in Russian].
A. P. Petrova, A. Yu. Isaev, N. F. Lukina, and B. F. Pavlyuk, “Influence of fillers on the electrical conductivity of adhesives and the properties of electrically conductive adhesives. Review,” Klei. Germetiki. Tekhnologii, No. 8, 9—15 (2018).
V. E. Gul’ and L. Z. Shenfil’, Electrically Conductive Polymer Compositions (Khimiya, Moscow, 1984) [in Russian].
V. I. Lukin, V. S. Ryl’nikov, A. N. Afanasyev-Khodykin, K. E. Kuntsevich, and K. N. Nishchev, “Method for determination of adhesion strength of silver coating to silicon substrate using adhesive,” Trudy VIAM No. 4, 12 (2015). https://doi.org/10.18577/2307-6046-2015-0-4-12-12
K. E. Kuntsevich, T. Yu. Tyumeneva, and A. P. Petrova, “Influence of fillers on the properties of adhesive prepregs and PCM on their properties,” Aviatsionnye Materialy i Tekhnologii, No. 4, 51—55 (2017). https://doi.org/10.18577/2071-9140-2017-0-4-51-55
A. Lewis and A. Babiarz Asymtek, Conductive Adhesive Dispensing Process (Nordson Electronic Business Group, West Carlsbad, CA). www.asymtek. com.
Yu. S. Ranzhin, Yu. N. Kalashnikov, and N. P. Litvinenko, “Electrically conductive adhesives for automated open die assembly,” Elektronika Mikroelektronika SVCh 2, 97—101 (2016).
A. Yu. Isaev and K. L. Besednov, “Methods for determining the electrical conductivity of polymer adhesives,” Vse Materialy. Entsiklopedicheskii Spravochnik, No. 12, 57—62 (2017).
GOST 20214. Electrically Conductive Plastics. Method for Determining the Specific Volumetric Electrical Resistance at a Constant Voltage (USSR Committee for Standardization and Metrology, Moscow) [in Russian].
ISO 16525–2. Adhesives—Test Methods for Isotropic Electrically Conductive Adhesives—Part 2: Determination of Electrical Characteristics for Use in Electronic Assemblies.
GOST 14759–69. Adhesives. Method for Determining Shear Strength (Moscow, 1969) [in Russian].
GOST 14760–69. Adhesives. Peel Strength Method (Moscow, 1969) [in Russian].
N. S. Gladkikh, A. S. Shestakov, T. N. Dreval, D. V. Patin, and A. A. Savkin, “Conductive adhesives for mounting space electronics,” Pechatnyi Montazh, No. 3, 156—160 (2016).
N. S. Gladkikh, A. S. Shestakov, and E. V. Kolesnikova, “Conductive adhesives for elements of electronic equipment,” Klei. Germetiki. Tekhnologii, No. 5, 2—4 (2014).
“Epoxy adhesives (conductive)”AO NNIEM web site (nii-em.ru).
A. P. Petrova, N. F. Lukina, L. A. Dementyeva, T. Yu. Tyumeneva, I. A. Avdonina, and N. S. Zhadova, “Adhesives for aviation technology,” Ross. Khim. Zh. 14, 46—52 (2010).
A. P. Petrova and G. V. Malysheva, Adhesives, Adhesive Binders and Adhesive Prepregs: A Tutorial, Ed. by E. N. Kablov (VIAM, Moscow, 2017) [in Russian].
A. P. Petrova, Heat Resistant Adhesives (Khimiya, Moscow, 1977) [in Russian].
E. N. Kablov, “Innovative developments of FSUE “VIAM” of the State Scientific Center of the Russian Federation for the implementation of strategic directions for the development of materials and technologies for their processing up to 2030,” Aviatsionnye Materialy i Tekhnologii, No. 1, 3—33 (2015). https://doi.org/10.18577/2071-9140-2015-0-1-3-33
E. N. Kablov, “Strategic directions for the development of materials and technologies for their processing up to 2030,” Aviatsionnye Materialy i Tekhnologii, No S, 7—17 (2012)
E. N. Kablov, “Aerospace materials,” Vse Materialy. Entsiklopedicheskii Spravochnik, No. 5, 7—27 (2007).