Distortional buckling behaviour of intermediate cold-formed steel lipped channel section with various web stiffeners under compression
Tóm tắt
The aim of the study is to investigate the distortional buckling behaviour of intermediate cold-formed lipped channel section under pinned end condition subjected to axial compression. An extensive test and numerical investigation of cold-formed lipped channel column with various types of intermediate web stiffeners is presented. In this study, three types of intermediate web stiffeners are chosen such as V, U and Σ. The entire cross-sectional dimensions meet with the pre-qualified column dimension given in Direct Strength Method for cold-formed steel structures. Totally, 12 columns are tested and results are compared with the numerical analysis. Numerical analysis is carried out using software ABAQUS. Material and geometric imperfections are incorporated in the FE model. Selected section dimensions met with the distortional buckling mode. Good correlation is achieved between experiment and finite element analysis. All the results are compared with the Direct Strength Method specifications for cold-formed steel structures. Based on the comparison of results, a suitable design modification is proposed. Furthermore, results are verified with the existing results which are available from the literature.
Tài liệu tham khảo
Anil Kumar MV, Kalyanaraman V (2014) Distortional buckling of CFS stiffened lipped channel compression members. J Struct Eng. https://doi.org/10.1061/(asce)st.1943-541x.0001027
Aruna G, Sukumar S, Karthika V (2015) Study on cold-formed steel built-up square sections with intermediate flange and web stiffeners. Asian J Civ Eng (bhrc) 16:919–931. https://doi.org/10.1061/(ASCE)0733-9445(2008)134:5(727)
Chen J, He Y, Jin WL (2010) Stub column tests of thin-walled complex section with intermediate stiffeners. Thin-Walled Structures 48:423–429. https://doi.org/10.1016/j.tws.2010.01.008
Hancock GJ (1985) Distortional buckling of steel storage rack columns. J Struct Eng 111:2770–2783. https://doi.org/10.1680/stbu.12.00055
He Z, Zhou X, Liu Z, Chen M (2014) Post-buckling behaviour and DSM design of web-stiffened lipped channel columns with distortional and local mode Interaction. Thin-Walled Struct 84:189–203. https://doi.org/10.1016/j.tws.2014.07.001
Kwon YB, Hancock GJ (1992) Tests of cold-formed channels with local and distortional buckling. J Struct Eng 117(7):438–448
Kwon YB, Kim BS, Hancock GJ (2009) Compression tests of high strength cold-formed steel channels with buckling interaction. J Constr Steel Res 65:278–289. https://doi.org/10.1016/j.jcsr.2008.07.005
Liu Y (2008) Crashworthiness design of multi-corner thin-walled columns. Thin-Walled Structures 46:1329–1337. https://doi.org/10.1016/j.tws.2008.04.003
Manikandan P, Arun N (2016) Behaviour of partially closed stiffened cold-formed steel compression member. Arab J Sci Eng. https://doi.org/10.1007/s13369-015-2015-0
Nguyen HT, Kim SE (2009) “Buckling of composite columns of lipped-channel and hat sections with web stiffener. Thin-Walled Struct 47(2009):1149–1160
Schafer BW, Pekoz T (1998a) Cold-formed steel members with multiple longitudinal intermediate stiffeners. J Struct Eng 124:17060. https://doi.org/10.1061/(ASCE)0733-9445(1998)124:10(1175)
Schafer B, Pekoz T (1998b) Computational modelling of cold-formed steel: characterizing geometrical imperfections and residual stresses. J Constr Steel Res. https://doi.org/10.1016/s0143-974x(98)00007-8
Sukumar S, Parameswaran P, Jayagopal LS (2006) Local distortional and Euler-buckling of thin walled built-up open sections under compression. J Struct Eng SERC India 32:447–454
Wang C, Zhang Z, Zhao D, Liu Q (2016) Compression tests and numerical analysis of web-stiffened channels with complex edge stiffeners. J Constr Steel Res 116:29–39. https://doi.org/10.1016/j.jcsr.2015.08.013/
Yan J, Young B (2002) Column tests of cold-formed steel channels with complex stiffeners. J Struct Eng 128:737–745. https://doi.org/10.1061/(asce)0733-9445(2002)128:6(737)
Yang D, Hancock GJ (2004) Compression tests of high strength steel channel columns with interaction between local and distortional buckling. J Struct Eng 130(12):1298–1305. https://doi.org/10.1061/(ASCE)0733-9445(2004)130:12(1954)
Yap DCY, Hancock GJ (2011) Experimental study of high-strength cold-formed stiffened-web C-sections in compressions. J Struct Eng 137:162–172. https://doi.org/10.1061/ASCEST.1943-541X.0000271
Zhang JH, Young B (2015) Numerical investigation and design of cold-formed steel built-up open section columns with longitudinal stiffeners. Thin-Walled Struct 89(2015):178–191
Zhang Y, Wang C, Zhang Z (2007) Tests and finite element analysis of pin-ended channel columns with inclined simple edge stiffeners. J Constr Steel Res 63:383–395. https://doi.org/10.1016/j.jcsr.2006.04.008
Zhou X, Liu Z, He Z (2015) General distortional buckling formulae for both fixed-ended and pinned-ended C-section columns. Thin Walled Struct 94:603–611. https://doi.org/10.1016/j.tws.2015.04.032