Displacement-based design of steel moment resisting frames with partially-restrained beam-to-column joints
Tóm tắt
Từ khóa
Tài liệu tham khảo
AISC (2010) Seismic provisions for structural steel buildings—ANSI/AISC 341-10. American Institute of Steel Construction, Society of Civil Engineers, Chicago, United States of America
ASCE (2010) Minimum design loads for buildings and other structures—ASCE 7-10. American Society of Civil Engineers, Reston, Virginia
Augusto H, Castro JM, Rebeló C, Simões da Silva L (2014) “Characterising partial-strength joints using finite element analysis,” chapter 6. In: Sullivan TJ, O’Reilly GJ (eds) characterising the seismic behaviour of steel beam-column joints for seismic design. Research report EUCENTRE 2014/01. IUSS Press, Pavia, Italy
Awkar JC, Lui EM (1999) Seismic analysis and response of multistorey semirigid frames. J Struct Eng 21:425–441
Broderick BM, Thomson AW (2005) Moment-rotation response of flush end-plate joints under cyclic loading. Int J Steel Compos Struct 5(5):441–451
Bruneau M, Uang CM, Whittaker A (1998) Ductile design of steel structures. McGraw Hill, United States of America
Carr AJ (2008) Ruaumoko2D manual. University of Canterbury, Cristchurch, New Zealand
CEN (Comité Européen de Normalisation) (2003a) Eurocode 3: design of steel structures—part 1–1: general rules and rules for buildings. Comité Européen de Normalisation, Brussels, Belgium
CEN (Comité Européen de Normalisation) (2003b) Eurocode 8: design of structures for earthquake resistance—part 1: general rules, seismic actions and rules for buildings. Comité Européen de Normalisation, Brussels, Belgium
CEN (Comité Européen de Normalisation) (2009) Eurocode 3: design of steel structures—part 1–8: design of joints. Comité Européen de Normalisation, Brussels, Belgium
Chen SJ, Yeh CH, Chu JM (1996) Ductile steel beam-to-column connections for seismic resistance. J Struct Eng ASCE 122(11):1292–1299
Coelho AMG, Bijlaard FSK (2007) Experimental behaviour of high strength steel end-plate connections. J Constr Steel Res 63:1228–1240
Della Corte G (2006) Vibration mode vs. collapse mechanism control for steel frames. In: Proceedings of the 4th international specialty conference on behaviour of steel structures in seismic areas (STESSA 2006). Yokohama, Japan, pp 423–428
Della Corte G, De Matteis G, Landolfo R, Mazzolani FM (2002) Seismic analysis of MR steel frames based on refined hystereic models of connections. J Construct Steel Res ELSEVIER 58:1331–1345
Della Corte G, Landolfo R, Mazzolani FM (2010) Displacement-based seismic design of braced steel structures. Steel construction—design and research, ECCS (Ernst and Sohn, Berlin), vol 3, pp 134–139
Della Corte G, Terranciano G, Di Lorenzo G, Landolfo R (2014) Characterising bolted end-plate beam-column joints using the component method, chapter 5. In: Sullivan TJ, O’Reilly GJ (eds) Characterising the seismic behaviour of steel beam-column joints for seismic design. Research report EUCENTRE 2014/01. IUSS Press, Pavia, Italy
Elnashai AS, Elghazouli AY (1994) Seismic behaviour of semi-rigid steel frame: experimental and analytical investigations. J Constr Steel Res 29:149–174
FEMA 350 (2000) Recommended seismic design criteria for new steel moment-frame buildings. Report no. FEMA-350, SAC joint venture, Federal Emergency Management Agency, Washington, DC
García R, Sullivan TJ, Della Corte G (2010) Development of a displacement-based design method for steel frame. RC wall buildings. J Earthq Eng 14(2):252–277
Ghobarah A, Osman A, Korol RM (1990) Behaviour of extended end-plate connections under cyclic loading. Eng Struct 12:15–27
Gulkan P, Sozen MA (1974) Inelastic responses of reinforced concrete structures to earthquake motions. ACI J 71–74(12):604–610
Hamburguer RO, Foutch DA, Cornell CA (2004) Performance criteria for MR steel frames in seismic zones. In: Proceedings of the 12th World conference on earthquake engineering, Vancouver, Canada
Iannone F, Latour M, Piluso V, Rizzano G (2011) Experimental analysis of bolted steel beam-to-column connections: component identification. J Earthq Eng 15(2):214–244
Kim DM, Engelhardt MD (2002) Monotonic and cyclic loading for panel zones in steel moment frames. J Constr Steel Res 58:605–635
Maley T, Sullivan TJ, Della Corte G (2010) Development of a displacement-based design method for steel dual systems with buckling restrained braces and moment-resisting frames. J Earthq Eng 14(SUPPL 1):106–140
Maley T, Sullivan T, Lago A, Roldán R, Calvi GM (2013) Characterising the seismic behaviour of steel MRF structures. Research report EUCENTRE—2013/02. IUSS Press, Pavia, Italy
McCormick J, Aburano H, Ikenaga M, Nakashima M (2008) Permissible residual deformation levels for building structures considering both safety and human elements. Proceedings of the 14th world conference on earthquake engineering, Beijing, China
Morelli F, Salvatore W (2014) Characterising beam-column assemblages with full strength joints, chapter 4. In: Sullivan TJ, O’Reilly GJ (eds) Characterising the seismic behaviour of steel beam-column joints for seismic design, Research report EUCENTRE 2014/01, IUSS Press, Pavia, Italy
Nader M, Astaneh-Asl A (1996) Shaking table test of rigid, semi-rigid, and flexible steel frames. J Struct Eng ASCE 122(6):589–596
Park R, Paulay T (1976) Reinforced concrete structures. Wiley, New York
Pennucci D, Sullivan TJ, Calvi GM (2011) Displacement reduction factors for the design of medium and long-period structures. J Earthq Eng 15(S1):1–29
Pettinga JD, Priestley MJN (2005) Dynamic behaviour of reinforced concrete frames designed with direct displacement-based design, report no ROSE 2005/02. IUSS Press, Pavia, Italy
Priestley MJN (2003) Myths and fallacies in earthquake engineering—revisited, Mallet-Milne lecture. IUSS Press, Pavia, Italy
Priestley MJN, Calvi GM, Kowalsky MJ (2007) Displacement based seismic design of structures. IUSS Press, Pavia, Italy
Rizzano G (2006) Seismic design of steel frames with partial strength joints. J Earthq Eng 10(5):727–747
Roldán R, Sullivan TJ, Della Corte G (2013) A comparison of force-based and displacement-based seismic design solutions for a steel MRF building. XXIV Italian days on steel construction (CTA), Turin, Italy
Roldán R (2014) Displacement-based design of steel moment resisting frames accounting for joint typology. Ph.D. Thesis, ROSE School, IUSS Pavia, Italy
Roldán R, Welch D, Nievas C, Sullivan TJ, Calvi GM (2014) Guidelines for the performance-based seismic design of steel MRF structures, research report EUCENTRE 2014/02. IUSS Press, Pavia, Italy
Ryan JC, Murray TM (1999) Evaluation of the inelastic rotation capability of extended end-plate moment connections. Research report no. FSEL/MBMA 83-03. Fear Structural Engineering Laboratory, School of Civil Engineering and Environmental Science, University of Oklahoma, Oklahoma, United States of America
SAC (1995a) Analysis and field investigation of building affected by the Northridge earthquake on January 17, 1994—part 1. Technical report SAC-95-04, part 1. Structural Engineering Association of California, Applied Technology Council, and California Universities for Research in Earthquake Engineering, United States of America
SAC (1995b) Analysis and field investigation of building affected by the Northridge earthquake on January 17, 1994—part 1. Technical report SAC-95-04, part 2. Structural Engineering Association of California, Applied Technology Council, and California Universities for Research in Earthquake Engineering, United States of America
Shibata A, Sozen MA (1976) Substitute structure method for seismic design of reinforced concrete. J Struct Div ASCE 102(ST1):1–17
Sullivan TJ (2013) Direct displacement-based seismic design of steel eccentrically braced frames structures. Bull Earthq Eng 11(6):2197–2231
Sullivan TJ, Calvi GM, Priestley MJN, Kowalsky MJ (2003) The limitations and performances of different displacement based design methods. J Earthq Eng 7(S1):201–241
Sullivan TJ, Quaini M, Maley T, Calvi GM (2011) Deformed shapes of steel moment resisting frames, EUROSTEEL 2011. Budapest, Hungary
Sullivan TJ, Priestley MJN, Calvi GM (eds) (2012) A model code for the displacement-based seismic design of structures, DBD12. IUSS Press, Pavia, Italy
Sullivan TJ, O’Reilly GJ, Morelli F, Salvatore W, Della Corte G, Terranciano G, Di Lorenzo G, Landolfo R, Augusto H, Castro JM, Rebelo C, Simões da Silva L (2014) Summary of the DiSTEEL project recommendations for the characterisation of steel beam-columns joints, chapter 7. In: Sullivan TJ, O’Reilly GJ (eds) Characterising the seismic behaviour of steel beam-column joints for seismic design, research report EUCENTRE 2014/01. EUCENTRE Press, Pavia, Italy
Sumner EA, Murray TM (2000) Performance of extended moment end-plate connections subject to seismic loading. US-Japan workshop on seismic fracture issues in steel structures, San Francisco, United States of America, February 28–March 1