Discrete Element Study on Mesoscopic Shear Mechanical Behavior of Fully Weathered Coastal Red Sandstone Considering Different Rock Mass Stability Grades

KSCE Journal of Civil Engineering - Tập 27 - Trang 4919-4937 - 2023
Zhijie Wang1, Xiaohao Rui1, Haiyan Xu2, Mingfan Zhao1, Zhihong Qiu1, Zengzhao Zhang1
1Dept. of Civil Enginnering, Southwest Jiaotong University, Chengdu, China
2School of Civil Engineering, Sichuan Agricultural University, Chengdu, Sichuan, China

Tóm tắt

The macro parameters such as cohesion and internal friction angle are usually measured on experimental test. The macro shear mechanical behaviors are determined by mesoscopic shear mechanical behaviors, which are difficult to be measured accurately on experimental test. This paper aims to study the mesoscopic shear mechanical behaviors of fully weathered coastal red sandstone (FWCRS) such as the force and displacement of rock particles, the force chain network, the microcracks and the coordination number, which can be systematically studied by discrete element software such as Particle Flow Code (PFC). This paper established models characterizing FWCRS with different rock mass stability grades by results obtained on experimental tests, and investigated the differences of their mesoscopic shear mechanical behaviors. The results show that the mesoscopic shear mechanical behaviors of FWCRS can be characterized by performing direct shear simulation and the differences among different rock mass stability grades were also revealed. As the stability increases from grade 1 to grade 5, the shear stiffness increases, the number of microcracks reduces by 48.07%, and there are significant differences in properties of shear band, development of microcrack, the coordination number and the force chain network. The research results can provide reference for the related research such as the evolution of mesoscopic shear mechanical behaviors in the failure process of rock mass in FWCRS and similar strata.

Tài liệu tham khảo

Abdi Y, Garavand AT, Sahamieh RZ (2018) Prediction of strength parameters of sedimentary rocks using artificial neural networks and regression analysis. Arabian Journal of Geosciences 11(19), DOI: https://doi.org/10.1007/s12517-018-3929-0 Almisned OA, Alqahtani NB (2021) Rock analysis to characterize Saudi soft sandstone rock. Journal of Petroleum Exploration and Production Technology 11(6):2381–2387, DOI: https://doi.org/10.1007/s13202-021-01160-y Amšiejus J, Dirgeliene N, Norkus A, Skuodis S (2014) Comparison of sandy soil shear strength parameters obtained by various construction direct shear apparatuses. Archives of Civil and Mechanical Engineering 14(2):327–334, DOI: https://doi.org/10.1016/j.acme.2013.11.004 Bernhardt ML, Biscontin G, O’Sullivan C (2016) Experimental validation study of 3D direct simple shear DEM simulations. Soils and Foundations 56(3):336–347, DOI: https://doi.org/10.1016/j.sandf.2016.04.002 Cai ZW, Wu TQ, Lu J, Wu Y (2021) Research on microscopic evolution laws of sandstone deformation and failure based on the particle discrete element method. Mathematical Problems in Engineering 2021, DOI: https://doi.org/10.1155/2021/8282493 Cil MB, Alshibli KA (2012) 3D assessment of fracture of sand particles using discrete element method. Geotechnique Letters 2:161–166, DOI: https://doi.org/10.1680/geolett.12.00024 Coetzee CJ (2016) Calibration of the discrete element method and the effect of particle shape. Powder Technology 297:50–70, DOI: https://doi.org/10.1016/j.powtec.2016.04.003 Cundall PA (2001) A discontinuous future for numerical modelling in geomechanics?. Proceedings of the Institution of Civil Engineers-Geotechnical Engineering 149(1):4147, DOI: https://doi.org/10.1680/geng2001.149.1.41 Gao F, Hu YH, Liu GN, Yang YG (2020) Experiment study on topological characteristics of sandstone coating by micro CT. Coatings 10(12), DOI: https://doi.org/10.3390/coatings10121143 Gong LN, Nie L, Liu C, Xu Y (2020) Modelling triaxial tests on fibrereinforced sands with different fibre orientations using the discrete element method. KSCE Journal of Civil Engineering 24(8):2268–2280, DOI: https://doi.org/10.1007/s12205-020-1050-x He BG, Zhang XW, Li HP (2019) Ground load on tunnels built using new Austrian tunneling method: Study of a tunnel passing through highly weathered sandstone. Bulletin of Engineering Geology and the Environment 78(8):6221–6234, DOI: https://doi.org/10.1007/s10064-019-01499-x Jeng FS, Weng MC, Huang TH, Lin ML (2002) Deformational characteristics of weak sandstone and impact to tunnel deformation. Tunnelling and Underground Space Technology 17(3):263–274, DOI: https://doi.org/10.1016/S0886-7798(02)00011-1 Jiu B, Huang WH, He MQ, Lv CH, Liang F (2018) Quantitative analysis of micron-scale and nano-scale pore throat characteristics of tight sandstone using matlab. Applied Sciences-basel 8(8), DOI: https://doi.org/10.3390/app8081272 Kahraman S, Altun H, Tezekici BS, Fener M (2006) Sawability prediction of carbonate rocks from shear strength parameters using artificial neural networks. International Journal of Rock Mechanics and Mining Sciences 43(1):157–164, DOI: https://doi.org/10.1016/j.ijrmms.2005.04.007 Kotrocz K, Mouazen AM, Kerenyi G (2016) Numerical simulation of soil-cone penetrometer interaction using discrete element method. Computers and Electronics in Agriculture 125:63–73, DOI: https://doi.org/10.1016/j.compag.2016.04.023 Khanlari GR, Heidari M, Momeni AA, Abdilor Y (2012) Prediction of shear strength parameters of soils using artificial neural networks and multivariate regression methods. Engineering Geology 131–132:11–18, DOI: https://doi.org/10.1016/j.enggeo.2011.12.006 Lee YK, Park JW, Song JJ (2012) Shear behavior model of rock joints applicable to CNL and CNS conditions. Harmonising Rock Engineering and the Environment 693–697 Ling HI, Burke C, Mohri Y, Matsushima K (2002) Shear strength parameters of soil-geosynthetic interfaces under low confining pressure using a tilting table. Geosynthetics International 9(4):373–380, DOI: https://doi.org/10.1680/gein.9.0223 Malkowski P (2015) Behaviour of joints in sandstones during the shear test. Acta Geodynamica Et Geomaterialia 12(4):399–410, DOI: https://doi.org/10.13168/AGG.2015.0034 Mishra BK, Mehrotra SP (1998) Modelling of particle stratification in jigs by the discrete element method. Minerals Engineering 11(6):511–522, DOI: https://doi.org/10.1016/S0892-6875(98)00033-8 Nitka M, Grabowski A (2021) Shear band evolution phenomena in direct shear test modelled with DEM. Powder Technology 391:369–384, DOI: https://doi.org/10.1016/j.powtec.2021.06.025 Oliveira OM, Bim R, Nunes GB, Higashi RAR (2018) Geotechnical aspects of weak sandstone from recife/brazil. Soils and Foundations 41(1):61–74, DOI: https://doi.org/10.28927/SR.411061 Peng ZS, Chen CH, Wu L (2021) Numerical investigation of particle shape effect on sand shear strength. Arabian Journal for Science and Engineering 46(11):10585–10595, DOI: https://doi.org/10.1007/s13369-021-05430-z Thornton C (1997) Coefficient of restitution for collinear collisions of elastic perfectly plastic spheres. Journal of Applied Mechanicstransactions of the ASME 64(2):383–386, DOI: https://doi.org/10.1115/1.2787319 Vieira CS, Lopes ML, Caldeira LM (2013) Sand-geotxtile interface characterization through monotonic and cyclic direct shear tests. Geosynthetics International 20(1):26–38, DOI: https://doi.org/10.1680/gein.12.00037 Wang MN, Chen WT, Liu DG, Tong JJ (2010) Study of unified standard of rocky and soil surrounding rock sub-classification in road tunnels. Rock and Soil Mechanics 31(2):547–552, DOI: https://doi.org/10.16285/j.rsm.2010.02.019 Wang C, Deng A, Taheri A (2018) Three-dimensional discrete element modeling of direct shear test for granular rubber-sand. Computers and Geotechnics 97:204–216, DOI: https://doi.org/10.1016/j.compgeo.2018.01.014 Wang Q, Hu XL, Zheng WB, Li LX, Zhou C, Ying CY, Xu C (2021) Mechanical properties and permeability evolution of red sandstone subjected to hydro-mechanical coupling: experiment and discrete element modelling. Rock Mechanics and Rock Engineering 54(5):2405–2423, DOI: https://doi.org/10.1007/s00603-021-02396-0 Wang MN, Wang YS, Li YW (2008) Conception of using SBQ as reference of sand soil tunnel surrounding rock classfication. Rock and Soil Mechanics 29(12):3235–3240, DOI: https://doi.org/10.3969/j.issn.1000-7598.2008.12.010 Weng MC, Jeng FS, Huang TH, Lin ML (2005) Characterizing the deformation behavior of Tertiary sandstones. International Journal of Rock Mechanics and Mining Sciences 42(3):388–401, DOI: https://doi.org/10.1016/j.ijrmms.2004.12.004 Weng MC, Li HH (2012) Relationship between the deformation characteristics and microscopic properties of sandstone explored by the bonded-particle model. International Journal of Rock Mechanics and Mining Sciences 56:34–43, DOI: https://doi.org/10.1016/j.ijrmms.2012.07.003 Xu HY, Chen CJ, Shao ZM, Wang ZJ, Cai LB, Li Z, Xu C (2021a) Dynamic response of heavy-haul railway tunnels in fully weathered coastal red sandstone strata with base rock reinforcement. Journal of Coastal Research 37(1):191–202, DOI: https://doi.org/10.2112/JCOASTRES-D-20-00056.1 Xu HY, Cai LB, Shao ZM, Wang ZJ, Li Z, Huang CC (2021b) Prediction of shear strength of fully weathered coastal red sandstone: influence of water content, fine content, and relative compaction. Journal of Coastal Research 37(4):827–841, DOI: https://doi.org/10.2112/JCOASTRES-D-20-00139.1 Yagiz S (2009) Predicting uniaxial compressive strength, modulus of elasticity and index properties of rocks using the Schmidt hammer. Bulletin of Engineering Geology and the Environment 68(1):55–63, DOI: https://doi.org/10.1007/s10064-008-0172-z Yetimoglu T, Salbas O (2003) A study on shear strength of sands reinforced with randomly distributed discrete fibers. Geotextiles and Geomembranes 21(2):103–110, DOI: https://doi.org/10.1016/S0266-1144(03)00003-7 Yoon J (2007) Application of experimental design and optimization to PFC model calibration in uniaxial compression simulation. International Journal of Rock Mechanics and Mining Sciences 44(6):871–889, DOI: https://doi.org/10.1016/j.ijrmms.2007.01.004 Yu J, Yao W, Duan K, Liu XY, Zhu YL (2020) Experimental study and discrete element method modeling of compression and permeability behaviors of weakly anisotropic sandstones. International Journal of Rock Mechanics and Mining Sciences 134, DOI: https://doi.org/10.1016/j.ijrmms.2020.104437 Yuan Y, Fu JL, Wang XL, Shang X (2020) Experimental study on mechanical properties of prefabricated single-cracked red sandstone under uniaxial compression. Advances in Civil Engineering, DOI: https://doi.org/10.1155/2020/8845368 Zhang HQ, Tannant DD, Jing HW, Nunoo S, Niu SJ, Wang SY (2015) Evolution of cohesion and friction angle during microfracture accumulation in rock. Natural Hazards 77(1):497–510, DOI: https://doi.org/10.1007/s11069-015-1592-2 Zou JF, Sheng YM, Xia ZQ (2017) Dynamic stress properties of dynamic compaction (DC) in a red-sandstone soil-rock mixture embankment. Environmental Geology and Water Sciences 76(12):411, DOI: https://doi.org/10.1007/s12665-017-6743-1