Direct identification and expansion of damping matrix for experimental–analytical hybrid modeling

Christensen, 1971 Lakes, 1999 Berger, 2002, Friction modeling for dynamic system simulation, Applied Mechanics Reviews, 55, 535, 10.1115/1.1501080 1998 Nashif, 1985 Jones, 2001 M. Link, Identification of physical system matrices using incomplete vibration test data, Proceedings of the fourth International Modal Analysis Conference, Los Angeles, CA, Vol. 1, 1986, pp. 386–393. M. Link, M. Weiland, J.M. Barragán, Direct physical matrix identification as compared to phase resonance testing: an assessment based on practical application, Proceedings of the fifth International Modal Analysis Conference, London, England, Vol. 1, 1987, pp. 804–811. Y.W. Luk, Identification of physical mass, stiffness and damping matrices using pseudo-inverse, Proceedings of the fifth International Modal Analysis Conference, London, England, Vol. 1, 1987, pp. 679–685. K. Shye, M. Richardson, Mass, stiffness, and damping matrix estimates from structural measurements, Proceedings of the fifth International Modal Analysis Conference, London, England, Vol. 1, 1987, pp. 756–761. Creamer, 1988, Identification method for lightly damped structures, Journal of Guidance, 11, 571, 10.2514/3.20354 W.F. Tsang, E. Rider, The technique of extraction of structural parameters from experimental forced vibration data, Proceedings of the seventh International Modal Analysis Conference, Vol. 2, 1989, pp. 1627–1633. J.L. Jensen, R. Brincker, A. Rytter, Identification of light damping in structures, Proceedings of the Eighth International Modal Analysis Conference, Kissimmee, FL, Vol. 2, 1990, pp. 1041–1047. D.F. Pilkey, D.J. Inman, An iterative approach to viscous damping matrix identification, Proceedings of the 15th International Modal Analysis Conference, Orlando, FL, Vol. 1, 1997, pp. 104–110. D.F. Pilkey, P. Gyuhae, D.J. Inman, Damping matrix identification and experimental verification, Smart Structures and Materials, SPIE Conference on Passive Damping and Isolation, Newport Beach, California, 1999, pp. 350–357. S. Adhikari, J. Woodhouse, Towards identification of a general model of damping, Proceedings of the 18th International Modal Analysis Conference, San Antonio, TX, Vol. 1, 2000, pp. 377-383. Henwood, 2002, Approximating the hysteretic damping matrix by a viscous matrix for modelling in the time domain, Journal of Sound and Vibration, 254, 575, 10.1006/jsvi.2001.4136 S.R. Ibrahim, W. D’ambrogio, P. Salvini, A. Sestieri, Direct updating of nonconservative finite element models using measured input-output, Proceedings of the 10th International Modal Analysis Conference, Vol. 1, 1992, pp. 202–210. S. Lammens, M. Brughmans, J. Leuridan, P. Sas, Application of a FRF based model updating technique for the validation of finite element models of components of the automotive industry, Proceedings of the 1995 Noise and Vibration Conference, SAE International, Traverse City, Michigan, USA, Vol. 1, 1995, pp. 103–115. Chen, 1996, Stiffness and damping matrices from frequency response functions, ASME Journal of Vibration and Acoustics, 118, 78, 10.1115/1.2889638 Dalenbring, 1999, Damping function estimation based on measured vibration frequency responses and finite-element displacement modes, Mechanical Systems and Signal Processing, 13, 547, 10.1006/mssp.1999.1221 Lee, 2001, Identification of damping matrices from measured frequency response functions, Journal of Sound and Vibration, 240, 545, 10.1006/jsvi.2000.3248 Lee, 2001, Development and validation of a new experimental method to identify damping matrices of a dynamic system, Journal of Sound and Vibration, 246, 505, 10.1006/jsvi.2001.3670 J.E. Hylok, Experimental Identification of Distributed Damping Matrices using the Dynamic Stiffness Matrix, Thesis (M.S.), University of Cincinnati, 2002. G.O. Ozgen, J. Kim, Further Developments in the dynamic stiffness Matrix (DSM) based direct damping identification method, SAE Noise and Vibration Conference, Traverse City, MI, 2005. G.O. Ozgen, J. Kim, Applications of the dynamic stiffness matrix (DSM) based direct damping identification method, SAE Noise and Vibration Conference, Traverse City, MI, 2005. J. O’Callahan, P. Avitable, R. Riemer, System equivalent reduction expansion process (SEREP), Proceedings of the seventh International Modal Analysis Conference, Vol. 1, 1989, pp. 29–37. J. O’Callahan, A procedure for an improved reduced system (IRS) model, Proceedings of the seventh International Modal Analysis Conference, Vol. 1, 1989, pp. 17–21. J. O’Callahan, Reduced model concepts, Proceedings of the 18th International Modal Analysis Conference, San Antonio, TX, USA, Vol. 2, 2000, pp. 1528–1536. Friswell, 1995 Y. Ye, Z. Qu, Iterative methods for dynamic condensation of structural matrices, Proceedings of the 18th International Modal Analysis Conference, San Antonio, TX, USA, Vol. 2, 2000, pp. 1776–1782. Paz, 1984, Dynamic condensation, AIAA Journal, 22, 724, 10.2514/3.48498 A. Berman, Identification of structural dynamic models—theoretical and practical bounds, System AIAA/ASME/ASCE/AHS 25th Structures, Structural Dynamics & Materials Conference, San Antonio, TX, USA, Vol. 2, 1984, pp. 123–129. A. Berman, Validity of improved mathematical models, a commentary, Proceedings of the 16th International Modal Analysis Conference, Palm Springs, California, USA, Vol. 1, 1998, pp. 681–691. Berman, 2000, Inherently incomplete finite element model and its effects on model updating, AIAA Journal, 38, 2142, 10.2514/2.877 S. Lammens, M. Brughmans, J. Leurian, P. Sas, Updating of dynamic finite element models based on experimental receptances and the reduced analytical dynamic stiffness matrix, Proceedings of the 1995 Noise and Vibration Conference, SAE International, Santa Barbara, California, USA, Vol. 1, 1995, pp. 117–126. N. Bouhaddi, S. Cogan, R. Fillod, Dynamic substructuring by Guyan condensation selection of the master dof, Proceedings of the 10th International Modal Analysis Conference, Vol. 1, 1992, pp. 328–333.