Direct combustion of wet/dry solution-impregnated cigarette butts for nano-FeOx synthesis: Effects of combustion conditions and NO reduction ability

Varma, 2016, Solution combustion synthesis of nanoscale materials, Chem. Rev., 116, 14493, 10.1021/acs.chemrev.6b00279 Li, 2020, Smart materials by nanoscale magnetic assembly, Adv. Funct. Mater., 30, 1903467, 10.1002/adfm.201903467 Kumar, 2019, Current trends in cellulose assisted combustion synthesis of catalytically active nanoparticles, Ind. Eng. Chem. Res., 58, 7681, 10.1021/acs.iecr.9b01007 Xu, 2015, Mechanochemical synthesis of advanced nanomaterials for catalytic applications, Chem. Commun., 51, 6698, 10.1039/C4CC09876E Danks, 2016, The evolution of ‘sol–gel’ chemistry as a technique for materials synthesis, Mater. Horiz., 3, 91, 10.1039/C5MH00260E Wolf, 2019, Combustion synthesis: a novel method of catalyst preparation, Catalysis, 31, 297, 10.1039/9781788016971-00297 Mukasyan, 2007, Solution combustion synthesis of nanomaterials, Proc. Combust. Inst., 31, 1789, 10.1016/j.proci.2006.07.052 Carlos, 2020, Solution combustion synthesis: towards a sustainable approach for metal oxides, Chem. A Eur. J., 26, 9099, 10.1002/chem.202000678 Novitskaya, 2021, A review of solution combustion synthesis: an analysis of parameters controlling powder characteristics, Int. Mater. Rev., 66, 188, 10.1080/09506608.2020.1765603 Liu, 2021, CoOx ceramics synthesized by a facile and rapid combustion method and its application for thermochemical energy storage, Ceram. Int., 47, 35048, 10.1016/j.ceramint.2021.09.046 Chen, 2019, A fast adhesive discrete element method for random packings of fine particles, Chem. Eng. Sci., 193, 336, 10.1016/j.ces.2018.09.026 Sun, 2019, Plastic/rubber waste-templated carbide slag pellets for regenerable CO2 capture at elevated temperature, Appl. Energy, 242, 919, 10.1016/j.apenergy.2019.03.165 Li, 2019, Ignition and volatile combustion behaviors of a single lignite particle in a fluidized bed under O2/H2O condition, Proc. Combust. Inst., 37, 4451, 10.1016/j.proci.2018.05.038 Xu, 2019, Adsorption and catalytic oxidation of elemental mercury over regenerable magnetic FeCe mixed oxides modified by non-thermal plasma treatment, Chem. Eng. J., 358, 1454, 10.1016/j.cej.2018.10.145 Barbosa de Andrade, 2020, Simplified synthesis of new GO-α-γ-Fe2O3-Sh adsorbent material composed of graphene oxide decorated with iron oxide nanoparticles applied for removing diuron from aqueous medium, J. Environ. Chem. Eng., 8, 10.1016/j.jece.2020.103903 Yang, 2016, Mercury removal by magnetic biochar derived from simultaneous activation and magnetization of sawdust, Environ. Sci. Technol., 50, 12040, 10.1021/acs.est.6b03743 Liu, 2011, Crystal plane effect of Fe2O3 with various morphologies on CO catalytic oxidation, Catal. Commun., 12, 530, 10.1016/j.catcom.2010.11.016 Thommes, 2015, Physisorption of gases, with special reference to the evaluation of surface area and pore size distribution (IUPAC technical report), Pure Appl. Chem., 87, 1051, 10.1515/pac-2014-1117 Deganello, 2018, Solution combustion synthesis, energy and environment: best parameters for better materials, Prog. Cryst. Growth Charact. Mater., 64, 23, 10.1016/j.pcrysgrow.2018.03.001 Thoda, 2018, Review of recent studies on solution combustion synthesis of nanostructured catalysts, Adv. Eng. Mater., 20, 1800047, 10.1002/adem.201800047 Rajeshwar, 2009, Solution combustion synthesis of oxide semiconductors for solar energy conversion and environmental remediation, Chem. Soc. Rev., 38, 1984, 10.1039/b811238j Li, 2019, Combustion characteristics of lignite char in a fluidized bed under O2/N2, O2/CO2 and O2/H2O atmospheres, Fuel Process. Technol., 186, 8, 10.1016/j.fuproc.2018.12.007 Sun, 2019, Evaluation of high-temperature CO2 capture performance of cellulose-templated CaO-based pellets, Fuel, 239, 1046, 10.1016/j.fuel.2018.11.123 Xia, 2018, Highly dispersed Mn–Ce binary metal oxides supported on carbon nanofibers for Hg0 removal from coal-fired flue gas, Appl. Sci., 8, 2501, 10.3390/app8122501 Li, 2011, CeO2–TiO2 catalysts for catalytic oxidation of elemental mercury in low-rank coal combustion flue gas, Environ. Sci. Technol., 45, 7394, 10.1021/es2007808 Zhou, 2022, Catalytic oxidation of Hg0 over Mn-doped CeO2-ZrO2 solid solution and MnOx/CeO2-ZrO2 supported catalysts: characterization, catalytic activity and SO2 resistance, Fuel, 310, 10.1016/j.fuel.2021.122317 Li, 2016, Low-temperature selective catalytic reduction of NO with NH3 over Mn2O3-doped Fe2O3 hexagonal microsheets, ACS Appl. Mater. Interfaces, 8, 5224, 10.1021/acsami.5b10264 Guo, 2010, S-doped α-Fe2O3 as a highly active heterogeneous Fenton-like catalyst towards the degradation of acid orange 7 and phenol, Appl. Catal. B Environ., 96, 162, 10.1016/j.apcatb.2010.02.015 Jia, 2021, Study on the Hg0 removal characteristics and synergistic mechanism of iron-based modified biochar doped with multiple metals, Bioresour. Technol., 332, 10.1016/j.biortech.2021.125086 Zhou, 2018, Investigation on synergistic oxidation behavior of NO and Hg0 during the newly designed fast SCR process, Fuel, 225, 134, 10.1016/j.fuel.2018.03.152 Li, 2013, Modification of CeO2 on the redox property of Fe2O3, Mater. Lett., 93, 129, 10.1016/j.matlet.2012.09.039 Gong, 2020, Facile synthesis of porous α-Fe2O3 nanostructures from MIL-100(Fe) via sacrificial templating method, as efficient catalysts for NH3-SCR reaction, Mater. Res. Bull., 123, 10.1016/j.materresbull.2019.110693