Luồng làm việc kỹ thuật số để chế tạo mặt nạ tùy chỉnh trong phục hồi chức năng bỏng với máy quét 3D smartphone và máy in 3D để bàn: Nghiên cứu trường hợp lâm sàng

Springer Science and Business Media LLC - Tập 8 - Trang 1-8 - 2022
Bushra Alhazmi1, Feras Alshomer1, Abdualziz Alazzam1, Amany Shehabeldin2, Obaid Almeshal1, Deepak M. Kalaskar3
1Division of Plastic Surgery, Department of Surgery, King Abdulaziz Medical City, Ministry of National Guard - Health Affairs (MNG-HA), King Abdullah International Medical Research Center (KAIMRC), Riyadh, Saudi Arabia
2Department of occupational therapy, King Abdulaziz Medical City, Ministry of National Guard Health Affairs, King Abdullah International Medical Research Center, Riyadh, Saudi Arabia
3UCL Institute of Musculoskeletal Sciences (IOMS), Division of Surgery and Interventional Science, Royal National Orthopaedic Hospital-NHS Trust, Middlesex, UK

Tóm tắt

Chúng tôi trình bày một luồng làm việc kỹ thuật số cho việc sản xuất mặt nạ tùy chỉnh dùng để quản lý sẹo bỏng bằng cách sử dụng máy quét 3D smartphone và máy in 3D để bàn. Hình ảnh quét 3D của một phụ nữ 48 tuổi có sẹo bỏng trên mặt đã được thu thập. Mô hình hóa 3D với các chương trình mã nguồn mở đã được sử dụng để tạo ra mặt nạ, sau đó được in 3D bằng filament polylactic acid (PLA) rắn và polyurethane nhiệt dẻo bán rắn (TPU). Mặt nạ truyền thống đã được sử dụng làm đối chứng. Mỗi mặt nạ được sử dụng trong 7 ngày. Kết quả chính là mức độ thoải mái và sự tuân thủ điều trị. Mặt nạ truyền thống là tiện lợi nhất, tiếp theo là mặt nạ TPU (điểm thoải mái trung bình lần lượt là 9/10 và 8,7/10). Sự tuân thủ của bệnh nhân là cao đối với cả mặt nạ TPU và mặt nạ truyền thống, mỗi loại được sử dụng ít nhất 21 giờ/ngày trong 7 ngày. Ngược lại, mặt nạ PLA không được dung nạp tốt. Luồng làm việc kỹ thuật số được đề xuất rất đơn giản, thân thiện với bệnh nhân và có thể được áp dụng cho các dịch vụ y tế cần nguồn lực lớn.

Từ khóa

#mặt nạ tùy chỉnh #phục hồi chức năng bỏng #máy quét 3D smartphone #máy in 3D để bàn #quản lý sẹo #tuân thủ điều trị

Tài liệu tham khảo

Clark C, Ledrick D, Moore A. Facial Burns. Treasure Island: StatPearls; 2021. 2022 Jan–. PMID: 32644716 Wei Y, Li-Tsang CWP. Rehabilitation of Patients with Facial Burn Injury: Principles and Practice Experiences. JSM Burns Trauma. 2017;2(3):1023. Calvo-Haro JA, Pascau J, Asencio-Pascual JM, et al. Point-of-care manufacturing: a single university hospital’s initial experience. 3D Print Med. 2021;7:11. https://doi.org/10.1186/s41205-021-00101-z. Chae M, Rozen W, McMenamin P, Findlay M, Spychal R, Hunter-Smith D. Emerging applications of bedside 3D printing in plastic surgery. Front Surg. 2015;2:25. Meglioli M, Naveau A, Macaluso GM, et al. 3D printed bone models in oral and cranio-maxillofacial surgery: a systematic review. 3D Print Med. 2020;6:30. https://doi.org/10.1186/s41205-020-00082-5. Galstyan A, Bunker MJ, Lobo F, et al. Applications of 3D printing in breast cancer management. 3D Print Med. 2021;7:6. https://doi.org/10.1186/s41205-021-00095-8. De La Peña A, De La Peña-Brambila J, Pérez-De La Torre J, et al. Low-cost customized cranioplasty using a 3D digital printing model: a case report. 3D Print Med. 2018;4:4. https://doi.org/10.1186/s41205-018-0026-7. Kadakia RJ, Wixted CM, Allen NB, et al. Clinical applications of custom 3D printed implants in complex lower extremity reconstruction. 3D Print Med. 2020;6:29. https://doi.org/10.1186/s41205-020-00083-4. Mitsouras D, Liacouras P, Imanzadeh A, Giannopoulos AA, Cai T, Kumamaru KK, et al. Medical 3D Printing for the Radiologist. Radiographics. 2015;35:1965–88. Lin J, Nagler W. Use of surface scanning for creation of transparent facial orthoses. Burns. 2003;29(6):599–602. Pilley M, Hitchens C, Rose G, Alexander S, Wimpenny D. The use of non-contact structured light scanning in burns pressure splint construction. Burns. 2011;37(7):1168–73. Wei Y, Wang Y, Zhang M, Yan G, Wu S, Liu W, et al. The application of 3D-printed transparent facemask for facial scar management and its biomechanical rationale. Burns. 2018;44(2):453–61. Wei Y, Li-Tsang C, Liu J, Xie L, Yue S. 3D-printed transparent facemasks in the treatment of facial hypertrophic scars of young children with burns. Burns. 2017;43(3):e19–26. Aguilar H, Mayer H. A New Method for Securing Dermal Substitutes and Skin Grafts to Difficult Portions of the Face Using a Custom 3D-Printed Facemask. J Burn Care Res. 2019;40(6):1015–8. Rudy H, Wake N, Yee J, Garfein E, Tepper O. Three-Dimensional Facial Scanning at the Fingertips of Patients and Surgeons: Accuracy and Precision Testing of iPhone X Three-Dimensional Scanner. Plastic Reconstruct Surg. 2020;146(6):1407–17. Alazzam A, Aljarba S, Alshomer F, Alawirdhi B. The Utility of Smartphone 3D Scanning, Open-Sourced Computer-aided Design, and Desktop 3D Printing in the Surgical Planning of Microtia Reconstruction: a Step by Step Guide and Concept Assessment. JPRAS Open. 2021;30:17–22.