Digital tooth contact analysis of face gear drives with an accurate measurement model of face gear tooth surface inspected by CMMs

Mechanism and Machine Theory - Tập 167 - Trang 104498 - 2022
Shenghui Wang1, Yuansheng Zhou2,3, Jinyuan Tang2,3, Kai Tang4, Zhengminqing Li5
1State Key Laboratory of High Performance Complex Manufacturing, Central South University, Changsha 410083, China
2State Key Laboratory of High-Performance Complex Manufacturing, Central South University, Changsha 410083, China
3College of Mechanical and Electrical Engineering, Central South University, Changsha 410083, China
4The Hong Kong University of Science and Technology, Hong Kong
5National Key Laboratory of Science and Technology on Helicopter Transmission, Nanjing University of Aeronautics and Astronautics, Nanjing 210016, China

Tài liệu tham khảo

Litvin, 1991, Computerized inspection of real surfaces and minimization of their deviations, Int. J. Mach. Tools Manuf., 32, 141 Litvin, 1991, Identification and minimization of deviations of real gear tooth surfaces, J. Mech. Des., 113, 55, 10.1115/1.2912751 Sammartinia, 2000, Development and validation of a new reference cylindrical gear for pitch measurement, Precis. Eng., 24, 302, 10.1016/S0141-6359(00)00040-4 Tang, 2019, An evaluation method of gear profile deviations based on the consideration of installation errors, Measurement, 146, 806, 10.1016/j.measurement.2019.06.045 Sato, 2010, Calibration and uncertainty evaluation of single pitch deviation by multiple-measurement technique, Precis. Eng., 34, 156, 10.1016/j.precisioneng.2009.05.009 Cao, 2008 Gao, 2004, Investigation on sampling size optimisation in gear tooth surface measurement using a CMM, Int. J. Adv. Manuf. Technol., 24, 599, 10.1007/s00170-003-1595-0 Pfeifer, 2001, Derivation of parameters of global form deviations for 3-dimensional surfaces in actual manufacturing processes, Measurement, 29, 179, 10.1016/S0263-2241(00)00038-5 Lin, 2020, Influence and compensation of CMM geometric errors on 3D gear measurements, Measurement, 151, 9, 10.1016/j.measurement.2019.107110 Takeda, 2016, Precision compensation method for tooth flank measurement error of hypoid gear, Measurement, 89, 305, 10.1016/j.measurement.2016.03.077 Tang, 2010, Machine-settings correction of spiral bevel gear based on coordinate measuring machine, J. Beijing Univ. Technol., 36, 1451 Heath, 2002 Lin, 2015, Pitch deviation measurement and analysis of curve-face gear pair, Measurement, 81, 95, 10.1016/j.measurement.2015.12.006 Zhiyao, 2011, Research on Measuring Path Planning of Face Gear Tooth Surface, Mach. Tool Hydraul., 39, 4 Jinyuan, 2013, Measurement method of modification face gear teeth space deviation based on CMM, Mech. Transm., 37, 8 Kovacs, 2020, Constrained fitting with free-form curves and surfaces, Comput. Aided Des., 122, 13, 10.1016/j.cad.2020.102816 Piegl, 1987, Curve and surface constructions using rational B-splines, Comput. Aided Des., 19, 485, 10.1016/0010-4485(87)90234-X Piegl, 1989, Modifying the shape of rational B-spline. Part 1: curves, Comput. Aided Des., 21, 509, 10.1016/0010-4485(89)90059-6 Piegl, 1989, Modifying the shape of rational B-splines. Part 2: surfaces, Comput. Aided Des., 21, 538, 10.1016/0010-4485(89)90014-6 Kruth, 1998, NURBS curve and surface fitting for reverse engineering, Int. J. Adv. Manuf. Technol., 14, 918, 10.1007/BF01179082 Chivate, 1995, Review of surface representations and fitting for reverse engineering, Comput. Integr. Manuf. Syst., 8, 193, 10.1016/0951-5240(95)00012-I Sarkar, 1991, Smooth-surface approximation and reverse engineering, Comput. Aided Des., 23, 623, 10.1016/0010-4485(91)90038-X Sun, 2000, Meshing analysis of real tooth surface, Chinese Journal of Mechanical Engineering, 36, 98 Sun, 1999, Solving algorithms of corresponding point of two real tooth surface, J. China Agric. Univ., 4, 64 Zhang, 2009, Digital simulation of spiral bevel gears' real tooth surfaces based on non-uniform rational B-spline, Hangkong Dongli Xuebao J. Aerosp. Power, 24, 1672 Litvin, 1997, Computerized simulation of meshing of conventional helical involute gears and modification of geometry, Mech. Mach. Theory, 34, 123, 10.1016/S0094-114X(98)00013-5 Gang, 2014, Tooth contact analysis of spiral bevel gears based on digital real tooth surfaces, J. Mech. Eng., 50, 1, 10.3901/JME.2014.15.001 Mo, 2015, Digital true tooth surface modeling method of spiral bevel gear, Mechanika, 21, 141, 10.5755/j01.mech.21.2.8397 Shuai, 2015, Spiral bevel gear true tooth surface precise modeling and experiments studies based on machining adjustment parameters, Proc. Inst. Mech. Eng. Part C J. Mech. Eng. Sci., 229, 2524, 10.1177/0954406214562632 Lin, 2015, Numerical tooth contact analysis of a bevel gear set by using measured tooth geometry data, Mech. Mach. Theory, 84, 1, 10.1016/j.mechmachtheory.2014.09.010 Liu, 2019, Investigation on the influence of work holding equipment errors on contact characteristics of face-hobbed hypoid gear, Mech. Mach. Theory, 138, 95, 10.1016/j.mechmachtheory.2019.03.042 Liang, 2020, Investigation of tool errors and their influences on tooth surface topography for face-hobbed hypoid gears, J. Mech. Des., 142, 1, 10.1115/1.4044745 Litvin, 2002, Design, generation, and stress analysis of two versions of geometry of face-gear drives, Mech. Mach. Theory, 37, 1179, 10.1016/S0094-114X(02)00050-2 Zeng, 1989