Diamond cutting of ultrasmall-diameter micropins of difficult-to-cut material

Liu, 2016, Investigation on the profile of microhole generated by electrochemical micromachining using retracted tip tool, Int J Adv Manuf Technol, 87, 877, 10.1007/s00170-016-8535-2 Masuzawa, 2000, State of the art of micromachining, CIRP Ann - Manuf Technol, 49, 473, 10.1016/S0007-8506(07)63451-9 Han, 2017, Fabrication of tungsten micro-rods by ECM using ultra-short-pulse bipolar current, CIRP Ann - Manuf Technol, 66, 193, 10.1016/j.cirp.2017.04.131 Han, 2018, Wire electrochemical grinding of tungsten micro-rods using neutral electrolyte, Precis Eng, 52, 458, 10.1016/j.precisioneng.2018.02.006 Balázs, 2021, A review on micro-milling: recent advances and future trends, Int J Adv Manuf Technol, 112, 655, 10.1007/s00170-020-06445-w Ohmori, 2007, Microscopic grinding effects on fabrication of ultra-fine micro tools, CIRP Ann - Manuf Technol, 56, 569, 10.1016/j.cirp.2007.05.136 Masuzawa, 2005, Surface finishing of micropins produced by WEDG, CIRP Ann - Manuf Technol, 54, 171, 10.1016/S0007-8506(07)60076-6 Heo, 2003, Study on cutting of sintered carbides –wear mechanism of PCD tool and cutting force in turning, J Jpn Soc Precis Eng, 69, 1724, 10.2493/jjspe.69.1724 Harano, 2012, Cutting performance of nano-polycrystalline diamond, Diam Relat Mater, 24, 78, 10.1016/j.diamond.2011.11.005 Kamaruddin, 2016, Cutting performance of CBN and diamond tools in dry turning of cemented carbide, Mech Eng J, 3 Heo, 2004, Machining characteristics of cemented carbides in micro cutting within SEM, Int J Precis Eng Manuf, 5, 35 Lim, 2003, Fabrication of cylindrical micropins with various diameters using DC current density control, J Mater Process Technol, 141, 251, 10.1016/S0924-0136(03)00261-9 Egashira, 2016, Microcutting using a micro turn-milling machine, Precis Eng, 44, 81, 10.1016/j.precisioneng.2015.10.005 Kuriyama, 2015, Cutting of nanoscale-diameter micropins, 2104 Furukawa, 2012, Fabrication of micropins using micro turning tools, Key Eng Mater, 523–524, 76, 10.4028/www.scientific.net/KEM.523-524.76 Egashira, 2011, Boring and face grooving using micro turning tools, CIRP Ann - Manuf Technol, 60, 81, 10.1016/j.cirp.2011.03.075 Egashira, 1999, Microultrasonic machining by the application of workpiece vibration, CIRP Ann - Manuf Technol, 48, 131, 10.1016/S0007-8506(07)63148-5 Rahman, 2006, Development of micropin fabrication process using tool based micromachining, Int J Adv Manuf Technol, 27, 939, 10.1007/s00170-004-2270-9 Egashira, 2014, Drilling of microholes down to 10 μm in diameter using ultrasonic grinding, Precis Eng, 38, 605, 10.1016/j.precisioneng.2014.02.010 Egashira, 2013, Drilling of microholes in glass by ultrasonic grinding using ultrasmall-diameter tools, J Japan Soc Abrasive Technol, 57, 102 Lee, 2007, Study on the generation of micro shafts by turning operation, J Japan Soc Abrasive Technol, 51, 657 Toride, 2007, Study on geometrical shapes of cutting edges for turning micro shafts, 8A117