Development of panel generation system for seakeeping analysis

Lee C-H. WAMIT theory manual. MIT report 95-2. Department of Ocean Engineering. Massachusetts Institute of Technology. 1995. Huang Y. Nonlinear ship motions by a Rankine panel method. Ph.D. thesis. Massachusetts Institute of Technology. 1998. Lin WM, Meinhold M, Salvensen N, Yue DK. Large-amplitude motions and wave loads for ship design. In: 20th symposium on naval hydrodynamics. 1994. p. 205–6. Nagakura, 2001, Automatic quadrilateral mesh generation for FEM using dynamic bubble system, IEEE Transactions on Magnetics, 37, 3522, 10.1109/20.952652 Borouchaki, 1998, Adaptive triangular-quadrilateral mesh generation, International Journal for Numerical Methods in Engineering, 41, 915, 10.1002/(SICI)1097-0207(19980315)41:5<915::AID-NME318>3.0.CO;2-Y Nowottny D. Quadrilateral mesh generation via geometrically optimized domain decomposition. In: Processing of the sixth international mesh round table. 1997. Tam, 1991, 2D finite element mesh generation by medial axis subdivision, Advances in Engineering Software, 13, 313 Joe, 1995, Quadrilateral mesh generation in polygonal regions, Computer-Aided Design, 7, 209, 10.1016/0010-4485(95)95870-K Blaker, 1991, Paving: a new approach to automated quadrilateral mesh generation, International Journal for Numerical Methods in Engineering, 32, 811, 10.1002/nme.1620320410 Lee, 2003, An algorithm of automatic 2D quadrilateral mesh generation with line constraints, Computer-Aided Design, 35, 1055, 10.1016/S0010-4485(02)00145-8 Kouh, 1993, Computer-aided geometric design and panel generation for hull forms based on rational cubic Bezier curves, Computer Aided Geometric Design, 10, 537, 10.1016/0167-8396(93)90030-7 Bronsart R, Knieling G. Automatic generation of a panel based representation of a ship hull surface for wave resistance calculation. In: 9th international symposium on practical design of ships and other floating structures. PRADS. 2004. Jensen, 1990, Automatic panel generation for seakeeping and wave resistance calculation, CFD and CAD in ship design, Elsevier, 133 Kim KH, Kim Y, Kim Y. WISH JIP phase 1 project report and user’s manual. Project report. Seoul National University. 2008. Miller MS. Report submitted to UC-Berkeley. Internet and Higher Education Course http://ntl.bts.gov/DOCS/narmain/naintro.html [Last accessed on: 02.03.11]. Farin, 2001 Hoschek, 1993 Piegl, 1995 Press, 1988 Kim K-H, Kim Y. Time-domain analysis of nonlinear ship motion responses based on weak-scatterer hypothesis. In: 19th international offshore and polar engineering conference. International society of offshore and polar engineers. 2009. Ko, 2010, Application of geometric modeling techniques to ship modeling and design, International Journal of Naval Architecture and Ocean Engineering, 2, 177, 10.3744/JNAOE.2010.2.4.177 Patrikalakis, 2002 Moore, 1966 George, 1998 Thompson, 1982, Boundary-fitted coordinate systems for numerical solution of partial differential equations-a review, Journal of Computational Physics, 47, 1, 10.1016/0021-9991(82)90066-3 Kim Y, Kim K-H, Song M-J. Numerical analysis and validation of nonlinear motions and loads on ships in waves. In: The 11th international symposium on practical design of ships and other floating structures. Graduate School and Research in Engineering Federal University of Rio de Janeiro. 2010. Kim Y, Kim K-H. WISH phase II report. Seoul National University. 2010. Hughes, 2005, Isogeometric analysis: CAD, finite elements, NURBS, exact geometry and mesh refinement, Computer Methods in Applied Mechanics and Engineering, 194, 4135, 10.1016/j.cma.2004.10.008