Nội dung được dịch bởi AI, chỉ mang tính chất tham khảo
Sự phát triển của các trường không đồng nhất dưới biến dạng hậu phê phán của các mẫu thép trong trạng thái kéo
Tóm tắt
Bài báo đề cập đến các nghiên cứu thực nghiệm về các trường biến dạng không đồng nhất trong khu vực "cổ" khi kéo các mẫu phẳng và hình trụ ở giai đoạn sau phê phán, ngay trước khi xảy ra đứt gãy, bằng cách sử dụng hệ thống video và phương pháp tương quan hình ảnh số. Chúng tôi xem xét các vấn đề liên quan đến việc giải thích các biểu đồ kéo được thu thập cho các mẫu với chiều dài khác nhau, với sự không đồng nhất về biến dạng trong phần làm việc của mẫu có "cổ." Chúng tôi thu được dữ liệu thực nghiệm về sự phân bố của các trường biến dạng dọc, ngang và cắt cũng như các trường dịch chuyển trong khu vực định vị của mẫu phẳng bằng cách sử dụng phương pháp tương quan hình ảnh số.
Từ khóa
#biến dạng không đồng nhất #mẫu thép #phương pháp tương quan hình ảnh số #giai đoạn sau phê phán #kéoTài liệu tham khảo
V. E. Vildeman, Yu. V. Sokolkin, and A. A. Tashkinov, Mechanics of Inelastic Deformation and Fracture of CompositeMaterials (Nauka, Fizmatlit, Moscow, 1997) [in Russian].
Z. P. Bazane and G. Di Luizo, “NonlocalMicroplaneModel with Strain Softening Yield Limits,” Int. J. Solids Struct. 41, 7209–7240 (2004).
V. V. Struzhanov and E. A. Bakhareva, “Mathematical Methods in Theory of Pure Bending of Rectangular Beams Produce of Weakening Material with Symmetric Extension-Compression Diagram,” Vych. Mekh. Sploshn. Sred 5 (2), 158–167 (2012).
V. E.Vildeman and N.G. Chausov, “Conditions of StrainWeakening of a Material in Extension of a Specimen of Special Configuration,” Zavodskaya Laboratoriya. Diagnostika Materialov 73 (10), 55–59 (2007).
V. P. Radchenko, E. V. Nebogina, and M. V. Basov, “Structure Model of Supercritical Elastoplastic Deformation of Materials in Uniaxial Tension,” Vestnik Samarsk. Gos. Tekhn. Univ. Ser. Fiz. Mat. Nauki, No. 9, 55–65 (2000).
V. E. Vildeman and M. P. Tretiyakov, “Tests of Materials with Construction of Complete Deformations Curves,” Probl. Mashinostr. Nadezhn. Mashin, No. 2, 93–98 (2013).
V. E. Wildemann, E. V. Lomakin, and M. P. Tretiyakov, “Postcritical Deformation of Steels in Plane Stress State,” Izv. Akad. Nauk.Mekh. Tverd. Tela, No. 1, 26–36 (2014) [Mech. Solids (Engl. Transl.) 49 (1), 18–26 (2014)].
M. P. Tretiyakov and V. E. Vildeman, “Tests under Tension–TorsionConditions with Descending Sections of Strain Curve Construction,” Fract. Struct. Integrity 24, 96–101 (2013).
V. E. Wildemann, “On the Solutions of Elastic-Plastic Problems with Contact-Type Boundary Conditions for Solids with Loss-of-Strength Zones,” Prikl. Mat. Mekh. 62 (2), 304–312 (1998) [J. Appl. Math. Mech. (Engl. Transl.) 62 (2), 281–288 (1998)].
Ya. B. Fridman, Mechanical Properties of Materials (Oborongiz, Moscow, 1952) [in Russian].
V. G. Bazhenov, D. V. Zhegalov, and E. V. Pavlenkova, “Numerical and Experimental Study of Elastoplastic Tension-Torsion Processes in Axisymmetric Bodies under Large Deformations,” Izv. Akad. Nauk. Mekh. Tverd. Tela, No. 2, 57–66 (2011) [Mech. Solids (Engl. Transl.) 46 (2), 204–212 (2011)].
M. Kh. Akhmetzyanov, G. N. Albaut, and V. N. Baryshnikov, “Study of Stress Strain State in the Neck of Plane Metallic Specimens in Extension by the Method of Photo-Elastic Coverings,” Zavodskaya Laboratoriya. Diagnostika Materialov 70 (8), 41–51 (2004).
L. B. Zuev, V. I. Danilov, and S. A. Barannikova, Physics of Plastic Flow Macrolocalization (Nauka, Novosibirsk, 2008) [in Russian].
S. Avril, F. Pierron, M. A. Sutton, and J. Yan, “Identification of Elasto-Visco-Plastic Parameters and Characterization of Lüders Behavior Using Digital Image Correlation and the Virtual FieldsMethod,” Mech. Mater. 40, 729–742 (2008).
M. A. Sutton, J.-J. Orteu, and H. Schreier, Image Correlation for Shape, Motion, and Deformation Measurements (Springer, New York, 2009).
E. V. Lomakin, T. V. Tretyakova, and V. E. Wildemann, “Effect of Quasi-Periodic Homogenization of Plastic Deformations in the Process of Tension of Specimens of an Aluminum-Magnesium Alloy,” Dokl.Ross. Akad. Nauk 461 (2), 168–171 (2015) [Dokl. Phys. (Engl. Transl.) 60 (3), 131–134 (2015)].
V. E. Vildeman, E. V. Lomakin, and T. V. Tretiakova, “Yield Delay and Space-Time Inhomogeneity of Plastic Deformation of Carbon Steel,” Izv. Akad.Nauk.Mekh. Tverd. Tela, No. 4, 56–67 (2015) [Mech. Solids (Engl. Transl.) 50 (4), 412–420 (2015)].
V. E. Vildeman, T. V. Tretiakova, and D. S. Lobanov, “Technique of Experimental Study of Postcritical Deformation on Specimens of Special Complicated Configuration by Using the Digital Image Correlation Method,” Vestnik PGT U. Mekh., No. 4, 15–28 (2011).
T. V. Tretiakova and V. E. Vildeman, “Relay-Race Deformation Mechanism during Uniaxial Tension of Cylindrical Specimens of Carbon Steel:Using Digital Image Correlation Technique,” Fract. Struct. Integrity, No. 24, 1–6 (2013).
T. V. Tretiakova, “SpecificCharacteristics of Application of Software Vic-3D Implementing the Digital Image CorrelationMethod in Studying Inelastic Strain Fields,” Vych. Mekh. Sploshn. Sred 7 (2), 162–171 (2014).
